Head cutting. Complete system ECON EUP 600 - EWT 350 incl. all auxiliaries installed for sale: ECON UNDERWATER PELLETISING - EUP 600 -control cabinet without display -Start-up valve -granulating head and unit -perforated plate -Pelletiser housing -Automatic knife...
2009 | 300046332 | ECON
More information
Moulds. Year of production: 2003-2005...
| 300038708 | ROSSI STAMP
More information
Winder for flexibles tubes and profiles. Pipe material: HDPE Pipe type: smooth Pipe diameter: Ø50 - Ø110 Winder type: double The coil is secured MANUALLY by a strap machine using plastic tape Speed min/max (m/min): 15 (can be adjusted) Number of arms: 6 A: 350/1000 mm B: 600 mm D: In...
2019 | 300043258 | HF HAYTEK
More information
Saw for profiles. Cutting unit under vertical and transverse base and with pneumatic carriage movement max. profile dimensions: Width = 532,2 mm Height = 10,5 mm...
2015 | 300042679 | BARUFFALDI
More information
Winder for flexibles tubes and profiles. Pipe material: PE Pipe diameter: Ø16 - Ø50 mm Winder type: double Speed max: 30 m/min Number of arms: 6 Inner diameter min/max: 350 -700 mm Outside diameter max: 1520 mm...
2017 | 300045131 | HF HAYTEK
More information
Die Head for profiles. Year of production: 2008-2012 Almost new, used only for test ONLY CALIBRATION TOOLING without table...
| 300038716 | MEWEKA
More information
Moulds. PVC window frame profile moulds - Producer – Greiner / Austria - Calibrator – two pcs x 230 mm - Vacuum downstream – 3 m. - Condition – excellent...
| 300035397 | GREINER
More information
Moulds. Set of moulds for waterways/gutters for AC...
| 300045155 | LAMP
More information
Marking equipment. Inlet height 1240.00 mm Inlet direction right- left Profile height adjustment 5,0-50,00mm Engraved roller/diameter 228.60 mm Rubber-coated roller/diameter 229.40 mm Counter pressure + roller/diameter 228.60 mm Engraved roller/length 175.00 mm Rubbe...
2002 | 300045166 | UNGRICHT
More information
Winder for flexibles tubes and profiles. Double winder LUNARDON 5-2700 for PE pipes in the range of Ø 63 - 125 mm...
2000 | 300045988 | LUNARDON
More information
Melt pump. Melt pump this equipment consists of 3 components, the body, drive system and plc control. - Codes: MAQEBENGBODY - GEAR PUMP - BODY MAQEBENGDRIVEN- GEAR PUMP - DRIVEN SYSTEM MAQEBENGPLC- GEAR PUMP - PLC CONTROLLER - The set was purchased in October...
2021 | 300046438 | BATTE
More information
Moulds. Tool for Rolling shuter 37 manufactured by Italian co. Campanieri. (year 2013) Tool for Rolling shuter 38 mm and 55 mm manufactured by Italian co. Friull Filiere (year 2005 & 2007) Tool 38 mm fill with expanded PVC (that tool need to be repar...
2007 | 300040538 | FRIUL FILIERE
More information
Moulds. Offer includes: - Profile extrusion moulds (co-extruded kit + wall profile kit) - a whole series of metal shelving and metal baskets - prefabricated structures made with those profiles (little house 28,8 MQ - bathing cabin + hexagonal kiosk 5 MQ) ...
2006 | 300044062 | HOME MADE
More information
Winder for flexibles tubes and profiles. ...
2001 | 300045685 | TAMEN
More information
Moulds. Dies and calibrators for cable channels. Few operating hours. Its look like new without any wear out . The all tooling equipment include 10 sets for the following sizes 15X13, 20X13,20X20, 40X20,40X40,60X40, 80X40.The sets for 60X40 and 80X40 are ...
2004 | 300028682 | HOME MADE
More information
Mould and die cleaning equipment. Pisko PC96 PET preform neck crystallizer machine, year 2014 Output: 12 000 preforms/hour Working hours: 27000 hours Configuration: PCO 1810 neck finish Includes following auxiliaries: - Preform Feeding System - Unscrambler - Temperature Control...
2014 | 300040281 | PISKO
More information
Saw for profiles. For sheets/pannels...
2011 | 300044448 | BAUSANO
More information
Air dryer. Maguire PET Dryer Series: Ultra Low Energy Dryer Performance: 300 kg/h Only used for tests Available immediatly...
2019 | 300043940 | MAGUIRE
More information
Air dryer. The CD series of drawer dryers is used for the simultaneous drying of several or more plastics, substances or products in small quantities. CD dryers, which are designed for, among other things, pre-drying and heating of products, are also used in e...
2015 | 300045207 | SHINI
More information
Haul off for profiles. Puller with cutter KRAUSS-MAFFEI - belt length 2500 mm - belt width 250 mm ...
1984 | 300042178 | KRAUSS MAFFEI
More information
Head cutting. Motor cutting system 7.5 kW Centrifugate motor 5.5 kW Water pump 5.5 kW Warranty 6 months...
2021 | 300045393 | MONDITECH
More information
Melt pump. Melt pump MAAG Maax 7 General application information application area: Thermoplastics application medium: HDPE: High Density Polyethelene density: 0.75 kg/l permissible materials: No limitations (all materials are allowed) vapor pressure: unknown a...
1995 | 300046249 | MAAG
More information
Saw for profiles. Ci.Emme saw for profiles. + Tilting, inclueded in the price. Brand: Ci.Emme Year: 2004 Entry Disc Diameter: 25 cm Profile width: 12cm -Engine Brand: Ansaldo Three-phase asynchronous engine Power: 220/380v - 4.5/2.6 A - 50Hz ...
2004 | 300043098 | CIEMME
More information
Heating and cooling unit for moulds and dies. Oven for PEX-A production Upgraded in 2014 and just used for tests. 3x400V 50Hz without Neutral 140kW Heating power 128kW Speed 2-20m/min Height 4100mm Width 2300mm Depth 1350mm 8 Heating channels 1 Heating channel is composed of 4 IR lights,4 kW...
2000 | 300045114 | IPT
More information
Head cutting. Brand - S. Rockstedt Model -unknown Year of construction: Unknown Working hours - unknown, but it has only been used once for test purposes Materials used - tested with PP Output -It was tested 250kg/h at the time, but should be up to 450-500kg/h...
| 300045248 | ROCKSTEDT
More information