Machine Sold

Used WEBER NE 9.40 of 2010 for sale


Search used machines

Similar Products:

Extrusion line for PE/PP pipes - WEBER - NE 9.40

Data Sheet of Used WEBER NE 9.40

Ref.: 300028289

Brand: WEBER

Year: 2010

Other Specifications:

WEBER line for HDPE pipe extrusion from 400 mm up to 800 mm

Manufacturer: WEBER
Year of manufacturing: 2010 (line has never run)

1) Single screw extruder - Weber NE 9.40
Screw 90 mm 40 L/D
Screw and Barrel are made from nitride steel
Screw pitches are armoured (wear resistance)
No hopper but has sliding flange on the feed
Tool flange with heated clamping ring in 2 halves and support.
Flange is equipped with heated flange ring for reception of melt pressure transducer and melt temperature feeler with ½ - 20 UNF thread.
The extruder is fitted with an AC drive with a specification designed by Weber.
Heating.
The detachable measuring points zone 8 + 9 are each equipped with two socket system CEE type with three poles protected with 25 amps. This corresponds to a max heating capacity of 5.5 Kw per external heating point.
The detachable measuring points on zones 10 – 23 are each equipped with two sockets system CEE type 5 poles protected with 25 amps. This corresponds to a max heating capacity of 15.0 Kw per external heating point.
Other Electrical Equipment.
Hours run counter installed into the control cabinet.
Ventilation of control cabinet (Air/Water heat exchanger) Max 8 Kw.
Attachment for bridging short-term voltage interuptions.
Main switch
1 socket (Schuko 230 V)
Thermocouples (Type J)
Plug conectors (Binder with screwed plug)

2) Control unit Extruder control system WPS

Electrical Data.
Operation voltage 3X400 V/N + PE
Frequency 50 Hz
Heating Voltage 230 V
Wiring Acc to IEC guidelines.

3) Co Extruder ZE 45
Height adjustable and Vertically tilt-able.
Water cooled feed zone.
Screw and barrel are manufactured in nitride steel.
45 mm Screw Dia 25:1 L/D
Cap Flange
Flange is equipped with a flange ring for reception of melt pressure transducer and melt temperature feeler Thread ½” – 20 UNF.
Drive
The extruder is fitted with a maintenance free AC asynchronous drive without brushes with a frequency converter, Speed controlled.
Capacity approx. 20 Kw.
Control.
Control is via the main extruder.
Conveying Unit ITP30
Suction conveyor type for all pourable materials
Max throughput approx. 1160 Kg/H for PE pellets with bulk weight of 0.6 Kg/dm3.
Housing made of stainless steel, Tank 20L with separate vacuum pump 4 Kw 400 V AC 50/60 cps three phase
Control with startup swith digital feed and alarm.
Filter with auto cleaning after each cycle
Inc 2 x 3.5 M Tube, Dia 50mm and suction lance.

4) Gravimetry igs-M1 Granulat.
Pellet execution.
Funnel weigher TW98 igs 98 evaluation electronics, CAN-BUS interface, Melt throughput or meter weight control, Pinch valve.
Adaptor, storage tank.

5) Pipe Die Head LC – 63PE.
For production of pipe range 280 – 800 mm incl adaptor flange to the extruder.
Measuring points ; 14
Connected load 77.5 Kw
Associated dies for the pipe dimensions acc to DIN 8074.

Colour stripe adaptor for diameter 400 mm / 355 mm
Colour stripe adaptor for diameter 500 mm / 450 mm
Colour stripe adaptor for diameter 630 mm / 560 mm
Colour stripe adaptor for diameter 800 mm / 710 mm.

PE Die for diameter 400 / 355mm, pressure class SDR 17
PE Die for diameter 500 / 450mm, pressure class SDR 17
PE Die for diameter 630 / 560mm, pressure class SDR 17
PE Die for diameter 800 / 710mm, pressure class SDR 17

Assembly car for pipe head .

6) Vacuum Tank Calibration V800/3/18000.
Execution; 3 Chambers 18000 mm
Upper trough made of stainless steel, Lower frame made of steel St37
Spray pipe and nozzles made from PVC
Total length 18000 mm Consisting of three separate movable tanks.
Working pipe range 355 - 800 mm with spray adjusters.
Roller ways incl electric motor driven.
With central water discharge
With 8 fold quantity controller (1”) with pressure reducer.
2 Vacuum pumps
Support disc holder for reception of support of semi-discs and reducing insert
Add covers
Crane trolleys in tank 1 and 2 for easy inserting of pipe end.
Low voltage bridge, 2 sec for motors of vacuum tank and circulation pump.
Roller bracket for pipe guidance between vacuum tank and first cooling unit.

Double filter for fresh water supply

Pipe guide via pitched support half shells 1 set per dia

1 set of medium and end seals per diameter.

Roundness rollers for evening pipe ovalities.

Spray pipe adjustment made in stainless steel VA incl reducers for support disc holders.

1 calibration sleeve PE-Pipe 355mm pressure class SDR 17/21
1 calibration sleeve PE-Pipe 400mm pressure class SDR 17/21
1 calibration sleeve PE-Pipe 450mm pressure class SDR 17/21
1 calibration sleeve PE-Pipe 500mm pressure class SDR 17/21
1 calibration sleeve PE-Pipe 560mm pressure class SDR 17/21
1 calibration sleeve PE-Pipe 630mm pressure class SDR 17/21
1 calibration sleeve PE-Pipe 710mm pressure class SDR 17/21
1 calibration sleeve PE-Pipe 800mm pressure class SDR 17/21


7) Cooling Unit N 800/9 (2X)
Upper made of stainless steel with two doors on each side for access
Lower frame made from steel ST 37
1 Chamber 9000mm long.
Working range pipe dia,s 355 – 800 mm with spray adjustment operation on the left hand side.
With thermostat control of cooling water.
With 8 fold roller support.
With 2 clamping rings for fixing of inlet and outlet seals.

1 set (2 Pcs) inlet and outlet seals (Vulkollan) for each diameter,

Roundness rollers for evening pipe ovalities.

Spray pipe adjustment execution in stainless steel..


8) Cooling unit N 800/6 (2X)
Upper trough made in stainless steel with two doors for access
Lowr frame made form steel ST 37
1 chamber 6000 mm long.
Working pipe range diameters 355 – 800 mm with spray pipe adjustment.
Operation left hand side.
With thermostat control of cooling water.
With 5 fold roller support.
Rollers for compensation of pipe ovalities (2 Pcs) for connection between 1st and 2dn cooling unit.
Roller bracket for pipe guidance between cooling units (6pcs)

1 set (2Pcs) inlet and outlet seals (Vulkollan) for each diameter.

Roundness rollers for evening of pipe ovalities.

Spray pipe adjustment execution in stainless steel.


9) Caterpillar Haul off p800/8 Plus
Eight caterpillar haul off with 4 tilting caterpillar’s with vulcanised neutral rubber pads.
Each caterpillar has vectorial motors for hauling of rigid plastic pipes from OD 160 – 803 mm.
Upper caterpillar with tilting control.
From OD 160 – 355 mm the machine works with 4 caterpillars whereas from od 400 – 803 the machine works with 8 caterpillars.
Complete with analogue synchronisation with signal from 0 – 10 V and caterpillar reverse and air accumulator with pressure drop sensor.
Standard speed 0,02 – 2,52 m/Min,
Caterpillar contact length 1800 mm
Hauling force 40000 N with 4 caterpillars and 80000 with 8 caterpillars.

Tropicalization.

Remote control with cable and speed indication.

Low voltage bridge.

Automatic pipe support rollers one set for entry and one for exit.

Automatic tightening device for each caterpillar.

Automatic winch to help extrusion start up pulling the pipe with a steel rope.


10) Pipe Saw TRK110-800.
Inline pneumatic planetary cutter for cutting only with knife of ridged HDPE pipes from 110 mm – 812 mm max wall thickness 65 mm
Carriage max forward speed 5.5 m/min with reference to smallest diameters and wall thickness in range.
Min cutting length at max speed 1400 RPM
Cutting accuracy at max cutting speed +/- 3 mm
Does not produce chips or dust.

2 sets of pipe clamps for diameter 257 – 406 mm
2 sets of pipe clamps for diameter 407 – 508 mm
4 sets of pipe clamps for diameter 509 – 812 mm

Reducers 425 – 270 mm.
Reducers 520 – 425 mm.
Reducers 960 – 520 mm.

Automatic synchronization of saw carriage with line speed
Max carriage speed 5.5 m/min with reference to smallest dia and wall thickness.
Min cutting length at max speed 1550 RPM
Cutting accuracy at max speed +/- 3 mm..

Do you need advice?


We will guide you through the entire process of buying and selling used machinery in a changing and complex international environment. Our sales, logistics, legal, and marketing teams will accompany you throughout the process to make the operation easy and risk-free.

Ask for machine price

Extrusion line for PE/PP pipes - WEBER - NE 9.40 - Ref.300028289


First and Last Name *
Please input your name
Contact Phone *
Please input your contact number
Company *
Please input your company name
Email address *
Please input a correct email address
City *
Please input your city
Country *
Please input your Country
Comments *
Please input your comments
To continue you must accept Personal Data Processing Policy.