This site uses own and third-party cookies to gather information in order to improve our services and to analyze your browsing habits. If you continue to browse, it constitutes acceptance of the installation of the same. The user can configure it´s browser if desired, to prevent them from being installed on your hard drive, but should take into account that such action may cause difficulties browsing the website. How to configure it

Accept
машина продана

Б/У Оборудование:Экструзионно-выдувные машины до 10L - ROCHELEAU - R4 - Связаться с нами : 300032722


Поиск б/у оборудования

Похожие продукты:

Rocheleau - R4 - Used machine - MachinePoint
Rocheleau - R4 - Used machine - MachinePoint
Rocheleau - R4 - Used machine - MachinePoint
Rocheleau - R4 - Used machine - MachinePoint
Rocheleau - R4 - Used machine - MachinePoint
Rocheleau - R4 - Used machine - MachinePoint
Rocheleau - R4 - Used machine - MachinePoint
Rocheleau - R4 - Used machine - MachinePoint

Технические данные ROCHELEAU R4 б/у

Связаться с нами : 300032722

Брэнд: ROCHELEAU

Год: 1998

Другие свойства:

Screw Mechanism
• 1.5” (38 mm) dia., 24/1 (L/D) reciprocating screw
• Bi-metallic barrel
• Hydraulic motor screw drive, variable (0-175 RPM)
• 70 lbs/hr (32 kg) HDPE output
• 200 grams maximum shot size, HDPE
• 75 lb. (34 kg) hopper capacity
• 3.25” x 8” stroke injection cylinder

Clamp Mechanism
• 5 tons force
• 2.5” bore x 10” stroke hydraulic cylinder
• 6” minimum platen opening, 20” maximum platen opening
• 10” x 10” (L x W) usable platen area
• T-square arrangement for rapid mold installation

Hydraulic
• 19GPM variable volume, pressure compensated piston pump
• Manifold mounted directional valves and flow controls
• 35-gallon reservoir capacity, with level/temp safety switch
• Spin-on filter element with indicator gage Electrical
• 25 HP, 1800 RPM, 220/440 volt, 3 phase, 60 Hz motor
• 220 volt heater bands, 9.3 Kw heater load, single head
• Two-zone extruder temperature controls, fan cooling
• Individual die head temperature controls, variac nozzle controls
• 88 full load amps @ 220 volts, appx. 60 running amps
• Solid state programmable controller
• Solid state touchpad data access unit

General
• 3,100 lbs. net weight
• 3-5 tons chilled water required, molds and machine
• 3 CFM @ 100 PSI compressed air required

Other Standard Equipment
• Main line coalescent air filter
• Manifold mounted air valves
• Quick exhaust valve on blow line
• Mold safety bottle jam protection
• Screw safety timer
• RPM indicator for screw speed
• 16-station water manifold
• Hopper magnet
• Machine mounting pads
• Fully guarded with electrical interlock for operator safety


Посетите нас на
˂
˃
Пожалуйста, напишите цифры, которые вы видите: 84460 Послать сообщение »

De acuerdo con lo establecido por la Ley Orgánica 15/1999, de 13 de diciembre, de Protección de Datos de Carácter Personal (LOPD), le informamos que los datos aportados serán incorporados a un fichero del que es titular MACHINE POINT CONSULTANTS, S.L....See Complete Law

Связаться С Нами
Head Office - Europe
Parque Tecnológico de Boecillo
Calle Andrés Laguna 9-11
E - 47151 Valladolid
Spain
+34 983 549 900
Посмотреть наши другие офисы
MachinePoint по всему миру