Moulds for Preforms. HUSKY Cold Half System HyPET 120 year 2016 Neck PCO 1881 Weight 22.7 g, for 350-450 CSD Model: 32 50x130 GEN 3.5 Stroke 63 mm Max Capacity: 134t Shot Counter: Around 117,000 Set of new core change for 22.28g can be purchased to an additional...
2016 | 300043001 | HUSKY
More information
Moulds for Preforms. HUSKY Cold Half System HyPET 120 year 2017 Neck 3025 Weight 17g, for 500-600ml water bottle Model: 32 50x130 GEN 3.5 Stroke 60 mm Max Capacity: 88t Rec. Capacity 85t Complete refurbishment done by HUSKY in 2017 Perfect condition and availa...
2012 | 300042893 | HUSKY
More information
Moulds for Preforms. M PET Mold Masters Hot Runner for HUSKY HyPET 120 Year 2013 Perfect condition and available immediately! ...
2014 | 300042892 |
More information
Moulds for Preforms. Husky cold half and robot plate Weight 9.5gr Neck: 26-22.12 P3 Cycle time: 6,7 sec Take out plate included 7.066.300 shots...
2014 | 300043450 | HUSKY
More information
Injection moulding moulds. Glass 260ml (Compact) 6 cavities Weight of the product: 13 g. Capacity: 4000 pieces/h Currently working on KRAUSS MAFFEI - KM280-1400 C3 800.000 injection cycles made...
2015 | 300038154 | HOME MADE
More information
Moulds for Closures. Husky Hot runner from 2008 Rouxel watercap cold half with the slitting machine Taiwan hwa long with the thermocontroller PMS Mold Master Mold is working condition Neck 30/25 2gr 16 cavities Mold runs at 6,5 sec Dimensions of the mold: 885 x 380 x 5...
2008 | 300039326 | HUSKY
More information
Moulds for Preforms. Used Cold half and robot plate for Husky injection molding machine Weight of the preform 30.4gr Neck: 26-22.12 P1 gravity II Lenght of the preform 119,20 mm Take out plate for the robot included the hotrunner is not included Mould stored Number o...
2016 | 300043449 | HUSKY
More information
Moulds for Closures. Plastisud Mold (Made in France) Mold: 72 cavities Format: 30/25 low Weight: 1,82 gr Manufacturer: Plastisud Mould dimensions : Width 640 x Length 1 590 x Thickness 700 mm Press : Netstal Synergy 3500 Guaranteed cycle time with cooling to temperat...
2007 | 300041699 | PLASTISUD
More information
Moulds for Preforms. Used cold Half for preform Brand: Husky Weight: 12.5 gr Neck: 29/25 for still water Cavities: 96 cav. Pitch = 50 x 140 HPP 4.0 Mould number of shots: 305.185 take out plate ( with 384 pcs of tubes )+ coolpik tubes ( 96 pucks and 288 pcs of tubes):...
2014 | 300044628 | HUSKY
More information
Moulds for Closures. OMMP injection mould for fruit-oil closure 29/21, year 2012 16-cavity mould Neck: 29/21 edible oil Approx. weight: 1.7g Material: LDPE 8.1 million shots Includes: - Hot runner system Yudo. - Heating thermostat with connection cables (Multitherm 4...
2012 | 300045927 | OMMP
More information
Injection moulding moulds. Body of the shower Product size:116/67/25 Product weight:0,0558 kg. Mold steel: 1,1730 (45), 40X Mold age: 18 months Mold cavities: 2 Runner: Cold Machine clamping force: 80T / 120 T Mold size: 300/350/350 Mold weight: 360 kg Button of the sho...
2016 | 300038499 | HOME MADE
More information
Moulds for Closures. Complete Corvaglia mold Neck 30/25 Weight 1,8g Cavities: 72 Mold was working in a Husky H300 Mold has 25 milions cycles Stored inside a box with anticorrosive oil Available immediately ...
2008 | 300039302 | CORVAGLIA
More information
Injection moulding moulds. Moulds for the production of small home electric appliancesduction. Most Molds are made/designed in Italy, steel impax -Molds corresponds to Juicers models (V2001/3001/4001) must be sold together since have some parts in common like axle dented wh...
| 300043703 | HOME MADE
More information
Injection moulding moulds. Different moulds for many models of shower. With connectors, grid, drains. PRICE FOR COMPLETE PACKAGE PRICE PER MOLD ON REQUEST. POSSIBILITY TO BE SOLD SEPARATLEY ...
| 300043853 |
More information
Injection moulding moulds. - Pallet 80x120 (no. 2 moulds, one prints the shelf, the second two sets of 3 blocks + crossbars) - Pallet 110x130 (no. 2 moulds, one prints the shelf, the second the blocks and lower crossbars) - Reel holder wedges (1 mould, used for 3 pieces per mo...
| 300044246 | HOME MADE
More information
Moulds for Closures. Used cold Half for caps and closures Brand: Husky Weight: 1.75 gr Neck: 30/25 for still water Cavities: 48 cav. number of shots: 239.816 HotRunner not available ...
2016 | 300044651 | HUSKY
More information
Moulds for Closures. Used complete mould for caps and closures Brand: home made by the seller in Europe Weight: 2,5 gr Neck: 38 mm for Milk and Juices (old Tetratop packaging) Cavities: 12 cav. number of shots: 938,328 the mould can be be tested Available immediatel...
2007 | 300045226 | HOME MADE
More information
Injection moulding moulds. -2 tips pliers. Mould dimensions (mm): 330 x 345 x h275 Article dimensions (mm): 50x100 Cycle time: 13sec Machine (approx): 120ton ...
| 300046285 | HOME MADE
More information
Injection moulding moulds. Article Dim.: (mm) 50 x 23 Machine (approx): 150 ton Cycle time: 12-13...
| 300046286 | HOME MADE
More information
Injection moulding moulds. Mould for bucket 4.8lt+ lid. Bucket-lid cavities: 1; 1 Article weight: 162.5gr; 52gr Mould dimensions: Ø490xH555; Ø445xH275 Article dimensions: Ø200xH205 Machine: 300ton; 100ton Cycle time: 9sec; 8sec...
| 300046294 | HOME MADE
More information
Injection moulding moulds. Mould Dim.(mm) 450 x 680 x h328 Article Dim.: (mm) 98 x 106 (open) Machine (Approx): 120ton Cycle time: 15sec...
| 300046287 | HOME MADE
More information
Moulds for Closures. Corvaglia cold half for closures Manufactured 06/2002 Material = lPE Product = Closures 30/25H Product Mass = 2,10g Cycle Time = 4,8 sec Cavities = 48 Working on Husky H225 Available immediately ...
2002 | 300035299 | CORVAGLIA
More information
Moulds for Closures. Used mold KTW for closures Number of cavities: 16 Format: 29/21 Oil cap Number of shots: 721.147 cyclce time: 9,4 sec materila LDPE Available immediately! ...
2011 | 300041040 | KTW
More information
Injection moulding moulds. -Mould for bowl lid Weight: 88g -Mould for bowl Weight: 181g -Mould for drawer Weight: 43g -Mould for grater Weight: 55g -Mould for cutlery tray Weight: 189g -Mould for dustpan Weight: 66,5g PRICE FOR ALL MOULDS POSSIBILITY TO BE SOLD SEPARATEL...
| 300043860 | HOME MADE
More information
Injection moulding moulds. Four-cavity mold for producing tube holder for underfloor heating...
2008 | 300045144 | ATTEMA
More information
Injection moulding moulds. Single cavity mold for manufacturing the distributor for the radiant floor...
2008 | 300045142 | MATREX
More information
Injection moulding moulds. Shopping Basket, composed by 5 moulds. 1) Bottom Plate (380ton, PP) 2) Front Plate (380ton PP) 3) Lateral Plate (380ton PP) 4) Rear Plate (380ton PP) 5) Lockings (110ton PP) ...
2013 | 300045841 | HOME MADE
More information
Injection moulding moulds. Shopping cart, composed by 7 molds. 1) Tray: 450ton needed, 1 cavity, hot runner YUDO. 2) Basket: 800-900ton needed, 1 cavity, hot runner YUDO 3) Structure: 900Tn (due to mould dimensions). 1 cavity, hot runner YUDO. Weight: 2.8kg 4) Wheel protector...
2016 | 300045844 | HOME MADE
More information
Injection moulding moulds. Set of 12 moulds for the production of kitchen utensils Description (parameters are given for each product in the following order: Number of cavities, Steel type, Mould size (mm), Product weight (kg), Production cycle (sec) 1. Small container (lid)...
2022 | 300045893 | AC MOLD
More information
Injection moulding moulds. 2 molds, one for the bucket and the other for the lid. Bucket mould 6lt with incorporated handle + lid Bucket-lid cavity: 1; 1 Article weight: 236,8gr; 53,5gr Mould dimensions: Ø740xH615 Ø450Xh335 Year: 2011 Machine: 400ton; 150ton Cycle time: 15sec...
| 300046292 | HOME MADE
More information
Injection moulding moulds. Injection moulds for welding sockets (corrugated pipes) diameters 200-250 -315-355-400-468-500 mm (Outer Diameter) Manufacturer: TECUS...
| 300036121 | TECUS
More information
Injection moulding moulds. 3 backrest designs available. Dimensions and weights are as follows: 55 x 55 x h80 mm 2.100 gr e 2.800 gr Needs 900ton injection machine. Cycle time: 40''-45''...
| 300044882 | HOME MADE
More information
Injection moulding moulds. Shopping basket mould. Is composed by two molds: 1) Basket mould (Needs 750-800tn injection machine) 2) Cover mould. (600ton machine) It is posible to produce three different models by changing some inserts. Full instructions on how to change ins...
2012 | 300045840 | HOME MADE
More information
Moulds for Closures. Complete mould for caps and closures Cavities: 72 Type of closure PCO 1810 Hot runner PSG is dismantled, it was cleaned by Messburgger PSG. Cold Half KTW Number of shots: 1.169.221 it is not possible to be tested because the seller doesn't has ...
2006 | 300041039 | KTW
More information
Injection moulding moulds. Manufacturer: SES Srl The mold has been used only for samples Maximum overall dimension:2.924mm x 2.503mm x 1.899 mm Weight of movable mould part: 30.500kg Weight of fixed mould part: 48.500 kg Total weight of the mould: 79.000kg Weight of the bin: 3...
2011 | 300042909 |
More information
Injection moulding moulds. Manufactured by Adana Kalipcilik, Turkey List of moulds available in the package (27 in total) Mould 1 20/90 elbow Mould 2 25/90 elbow Mould 3 32/90 elbow Mould 4 20 Tee fitting Mould 5 25 Tee fitting Mould 6 32 Tee fitting Mould 7 20 coupling Mou...
2010 | 300044449 |
More information
Injection moulding moulds. Dimensions: D645 x H760 mm e D555 x H370 mm Weights: 590 gr and 155 g ...
2000 | 300044881 | HOME MADE
More information
Injection moulding moulds. Dimensions as follows: Bucket D 305 X H 315 mm Weight: 575g Lid D 312 X H 20 mm Weight 170g...
2000 | 300044879 | HOME MADE
More information
Injection moulding moulds. - number of inputs - 2 - material - PS - Forming elements made of hardened steel 1.2312 and 1.2738 Hardness 30-32 HRC. Other steel plates 1.1730. - cold channel system - automatic cycle operation Various models avaiable Price includes one mould mo...
| 300041549 | HOME MADE
More information