Thermoformer. 4-s linear thermoforming vertical machine Processed material - Plastic tape as a roll (PS) Finished product-Thermoformed plastic bottles Productivity - 6000 bottles of 200ml per hour - 28 cycles / minute/ line A mould cooling device and a plastic ...
2013 | 300041603 | AGAMI
More information
Thermoformer. The high speed fully automatic pressure thermoforming machine, AMP series, for the production of food packaging articles are designed to fit moulds with multiple rows with integrated cutting system (simultaneous forming and trimming technology) to gi...
2017 | 300042844 | AMUT COMI
More information
Thermoformer. Thermoforming area: 3000 x 2000 mm Depth of draw: 500 mm Material: ABS, PP,PE,PET,PMMA,PC,PS Material thickness: min 2 mm - max 12 mm Movement looking sheet: hydraulic + bolt Movement upper and lower lamps : pneumatic Movement table: hydraulic Moveme...
1996 | 300038403 | ATEM
More information
Thermoformer. Resistance: total 112 (56 up and 56 down) size mm 60x250 and 600 W/cd with a total power of 67,2 kW. Vacuum pump 4 kW with flow 165 m3/h and pression 0,66 mbar PLC Siemens with software 6GK1561-3AA01 for the comunication with PC and 6GK1713-5CB61-...
2005 | 300039528 | ATEM
More information
Thermoformer. Twin-sheet thermoforming machine complete with two automatic loaders Upper and lower oven with halogen lamps 5 fans for cooling ...
2005 | 300045271 | CANNON
More information
Thermoformer. Cups and containers up to 2mm have been produced Very low usage Drawing depth negative 150 mm Drawing depth optional 200 mm Film width PP 410...804 mm Film width PS 410...814 mm Film transport width 410...835 mm punching force max. 350 KN Lifting ...
2007 | 300041374 | GABLER
More information
Thermoformer. Automatic forming machine M98 that uses trim-in-place (punch and die) tools in tilting technology Forming Station Main drive with servo Tilting table drive with servo Electrical driven pre-punch adjustment Servo driven plug assist unit 4 columns gu...
2011 | 300045945 | GABLER
More information
Thermoformer. Pre-heating unit "2 Heat" for D600 Sheet width max. 640 mm Forming area: 600 x 320 mm Drawing depth maxi: 40 mm neg./ 15 mm pos Equipment of D600 Top and bottom ceramic heater 1,8 m long with longitudinal heater control, 0,375 m of heater with cross...
2015 | 300046039 | GABLER
More information
Thermoformer. Machine has been used for testing new product so low usage Roll unwinder Rewinder Includes: W / 2009 ABUS 320-kg capacity jib crane, w/abused electric chain hoist w/ two-way pendant control, approximately 4' outrigger ...
2010 | 300046505 | GABLER
More information
Thermoformer. Max. sheet width: 1100mm Nº & type of heaters: 27+18 Quartz Power of each heater: 200/400W Regulation of heating elements: Yes Sheet thickness : owner only produced with 3-6,5mm Photocell sagging control Pneumatic plug assist Heating, forming and cut...
1995 | 300044302 | GEISS
More information
Thermoformer. Manual Feeding Power of each heater: 2 x 70 kW Regulation of heaters: Yes Photo Cell Control no Control: pneumatic...
1995 | 300045738 | GEISS
More information
Thermoformer. Quick clamping system for tools Motorised stepless clamping frame adjustment in both axes Motorised stepless window panel adjustment in both axes Forming Area: min: 333 x 400 mm Heaters are equipped with "SPEEDlUM" type radiators. Automatic heating...
2012 | 300045739 | GEISS
More information
Thermoformer. Twin-Sheet Thermoforming machine with automatic sheet loader and only 20.000 working hours New screen and new cylinders in lifting table replaced by Geiss last year Forming area max and min (mm) 2200x1300 - 1150x750 Control of heaters: Sinumerik ...
1998 | 300046004 | GEISS
More information
Thermoformer. Maximum knife length: 5000 mm Maximum sheet width: 533 mm Maximum material roll diameter: 1000 mm Thermoplastic materials processed on the machine: PP, BOPS, OPS, GPPS, PS, HIPS, PVC, PET Maximum dry cycles (without material) per minute: 50 Main...
2016 | 300038070 | GN
More information
Thermoformer. This machine is designed to produce termoforming moulded products with a pre-punch streching of material. Moulding and cutting of finished products is performed in one unit, which ensures accuracy and repeatability of products throughout the entire p...
2005 | 300042024 | GN
More information
Thermoformer. Maximum knife length: 5000 mm Maximum sheet width: 533 mm Maximum material roll diameter: 1000 mm Thermoplastic materials processed on the machine: PP, BOPS, OPS, GPPS, PS, HIPS, PVC, PET Maximum dry cycles (without material) per minute: 50 Main...
2017 | 300038069 | GN
More information
Thermoformer. Maximum dry cycles/minute: 50...
2007 | 300044797 | GN
More information
Thermoformer. Drawing depth (negative): 120 mm Drawing depth (positive): 25 mm Sheet width: 380 mm Material roll diameter: 1000 mm Drying cycles per minute: maximum 45 2400 working hours The machine is after overhaul of the main shaft and engine Can process PP ...
2004 | 300046280 | GN
More information
Thermoformer. Used thermoformer + packaging machine Chain moving with Servo Motor Servo main engine 11 kw ( 31 Nm,3000 rpm ) Servo Plug Assist Motor 7.5 kw ( 25.5 Nm, 3000 rpm ), ( with automatic lubrication) Unwinder (AC) motor 0.75kw ( 89 Nm, 1435 rpm ) Cutting ...
2012 | 300044794 | GÜVEN TEKNIK
More information
Thermoformer. Includes a 95 mm diameter HIPS cup mould and 14 sets of interchangeable insert parts with capacities from 0.2 to 0.5 litres Maximum material width: 525 mm Clamping force: 15 000 daN Number of cycles: 40/min....
1987 | 300043886 | ILLIG
More information
Thermoformer. Forming area min. 300x100 mm Forming height above/below sheet : 100/30 mm Sheet width: max./min. 550/340 mm Max. number of cycles: 18/minute depending on materials Pneumatic system Plug assist Vertical adjustment of the lower part of the forming tabl...
1989 | 300044955 | ILLIG
More information
Thermoformer. Refurbished in 2016 Depth of Draw: positive 600 mm; negative 300 mm Preheater Feed length: 1000 mm Photo cell sagging control Pneumatic plug assist...
2007 | 300045543 | ILLIG
More information
Thermoformer. Forming - cutting - stacking Forming machine: Min-max forming area : 400x250-700x500 Min-max film width: 440-750mm Height of parts above / below the film level: 120 / 40mm Diameter of Film Reel: 1200mm Connected electric power from upper-lower heate...
1998 | 300045659 | ILLIG
More information
Thermoformer. Thermoforming line with adjustable window plates. Can do twin sheet if needed Currently the machine process semi-finished products up to 8 mm thickness. 10 mm is certainly also possible . All common thermoforming semi-finished products such as ABS, ...
2001 | 300045717 | ILLIG
More information
Thermoformer. Illig vacuum forming and deep drawing machine type UA150 ED: -Upper side Plug Assist unit with remote adjustment -6-fold cooling fan reinforced -upper heating with small radiator circuit -material sag control -Special programme for tool cooling ...
1988 | 300045835 | ILLIG
More information
Thermoformer. Line consists of the next units: Unwinder/ preheater/ Forming and punching machine RDM 70k(2g) / stacker/ trimming unit/ grinder / blower Technical Data RO Unwinder Material roll stand Material width max.::805 mm Material roll diameter max.:1200 mm ...
2012 | 300046746 | ILLIG
More information
Thermoformer. Max. sheet length: 1000mm Max. sheet width: 700mm Forming area: 960x660mm Max. negative/positive forming depth: 300mm Automatic bubbling controlled by photocell Pneumatically-driven top piston, motorized remote stroke adjustment, standard changeover ...
2001 | 300046765 | ILLIG
More information
Thermoformer. Used to produce lids for yoghurt pots Min thermoforming area 250x200 mm Max sheet width 560 mm Clamping force thermoforming and cutting station 500kN 2 stackign unit available, one traditional and one for round products...
1996 | 300042533 | KIEFEL
More information
Thermoformer. 3 stations: forming/cutting - punching - stacking Forming Area: 540x420mm Film Width: 570mm Foil thickness: min 0,2mm - max.3mm Depth of draw pos/neg: 140mm Materials: PET, PVC, PP, PS, HIPS Cycle/min min-max : 5-40 Working hours : 41983 Preheater...
1993 | 300042866 | KIEFEL
More information
Thermoformer. Max Tool dimensions: 516 x 366 mm Forming height above - below Material: 120/40 mm Maximum sheet width: 545 mm Stacker A/B Max. cycles/min: 35...
2002 | 300044572 | KIEFEL
More information
Thermoformer. Vacuum thermoforming machine from EPP reels. Everything goes in line, fully automatic and all auxiliary equipment is included: vacuum, cooling, mold change trolleys, etc. Forming area: 760x2250 mm max. Part height: 220 mm pos. max, 30 mm neg. max. U...
2000 | 300046271 | KIEFEL
More information
Thermoformer. Max cycles/min : PS 25-30/PP 8-20 Max sheet width : 800 mm...
1994 | 300043325 | MORETTI
More information
Thermoformer. manual sheet loading temperature control automatic air refrigeration ceramic lamps PLC control...
2005 | 300038793 | PARCO
More information
Thermoformer. Ceramic heaters: 80 Manual loading Approx. 25000 operating hours There are several window plates for common material formats available Plug Assist ...
2008 | 300045014 | PARCO
More information
Thermoformer. The machine has ceramic resistors and vacuum pump. Control system model: SIMATIC OP 37 The machine does not have plate loader neither automations for rolls processing. 1 cycle of production takes around 10 minutes for material width of 8 mm Moulds ar...
2002 | 300036637 | PERROS
More information
Thermoformer. Film in reel up to 2mm in automatic and plates in format up to 6mm in semi-automatic all thermoformable materials Max format: 700x500mm Min Format: 400x300mm It is equipped with a cutter It is suitable for prototyping, small and medium series Machi...
1995 | 300036274 | POZZO
More information
Thermoformer. This single station thermoforming machine is designed and built to meet the requirements of various production sectors, for small and medium production of thermoplastic materials with thicknesses ranging from 1 mm to 10 mm and maximum plate dimension...
2007 | 300045595 | QS GROUP
More information
Thermoformer. Materials PP-HIPS Preheater Min mould area 480x220 mm Clamping force 400.000N Mechanical cycles /min max 35...
2005 | 300038166 | RIGO
More information
Thermoformer. Forming Area Max - 600 x 560 mm Forming Area min - 400 x 300 mm Speed - 1500 cycle/h Automatic quickly change mould Preheater for PP Heated die with diathermic oil thermoregulator PLC Siemens...
1999 | 300039242 | RIGO
More information
Thermoformer. Sheet width: 390-830mm Max. Formed Area: 800x600mm Min. Formed Area: 360x270mm Availability Punching Area (Max): 780x580mm Positive formed part height:150mm Negative formed part height:150mm Work Efficiency≤50pcs/min Heating Power: 134kw Main Motor p...
2022 | 300046397 | SHANTOU AUTO PACKAGING MACHINERY
More information
Thermoformer. Sheet width: 390-830mm Max. Formed Area: 800x600mm Min. Formed Area: 360x270mm Availability Punching Area (Max): 780x580mm Positive formed part height:150mm Negative formed part height:150mm Work Efficiency≤50pcs/min Heating Power: 134kw Main Motor p...
2022 | 300046396 | SHANTOU AUTO PACKAGING MACHINERY
More information
Thermoformer. Punching press and thermoforming machine t2 for PP/PET eggs trays (mould not available) Punching press Max widh material 640 mm Cutting dimensions 640x340 mm Depth of draw 120 mm 20-80 cycles min Clamping force 10000 kg Thermoforming machine Mater...
1999 | 300037197 | T2
More information
Thermoformer. Thermoforming machine for egg containers Max sheet width: 880 mm Max tool size: 850x1020 mm Platen clamping force: 35,000 kg Horizontal cutting unit T2 8036/15-15 PTM...
2007 | 300044860 | T2
More information
Thermoformer. Vacuumforming machine Type of control: manual Materials: PET-G, Polycarbonat, acrilic, PVC, ABS, etc, Sheet size: 1500 x 2000 mm Maximum size to form: 1300 mm x 1800 mm (depending on used material and mould)\ Heating elements: Ceramicx Full Trough El...
2017 | 300046544 | THE CHANNELLETTER FORMER
More information
Thermoformer. Thermoforming area 1200x1300 Max moulding positions: 95mm Material: EPS dimensions of 80 ml cup: 55,6 mm high; 57 mm diameter dimensions of 200 ml cup: 92,3 mm high; 79,4 mm diameter Automatic Horizontal moulding machines for cups, food trays, contai...
1993 | 300038382 | THERMOWARE
More information
Thermoformer. Pack of 3 EPS cups machines including testing & counting machine & pre-expander VA40 (year 1999) 1/EPS cups machine THW 3510 YEAR 2002 Max number of moulds : 10 Drawing : Illustration 2-2 Weight : 1900kg Dimensions Lxlxh : 2070x1780x2200 Steam : Pr...
2002 | 300037573 | THERMOWARE
More information
Thermoformer. Pack of 4 EPS foam cup machines, molds, 2 packaging units, 2 tester units (1 tester THW 125E year 2005 & 1 tester THW 3320 year 2008), 1 pre-expander THW VA 40 year 2005 & 4 Silos Reason for selling: Change of production field. Working hrs: 50.000 to...
2008 | 300040835 | THERMOWARE
More information
Thermoformer. Max. Forming Area:1500x1000 mm Material: ABS, PST, PC, HDPE, PMMA Film depth positive and negative:600mm Material Thickness: min 1 mm - max 10 mm Movement: pneumatic Power installed: 65 Kw Power Ceramic heater: superior and inferior 650 Kw, central 4...
2000 | 300038386 | VILLA
More information
Thermoformer. Maximum sheet size mm 1560x1060 Minimum frame hole size (width x depth) mm 355x255 Ceramic Heaters Quick Mold Change System with removable table Pneumatic counter mold Availability October 2023...
2006 | 300045702 | VILLA
More information
Thermoformer. Sheet fed thermoforming machine complete with automatic loader Hours of operation: 8000 Cooling fans: 12 Quartz heating plate elements, Size 240x15mm...
2010 | 300045778 | VILLA
More information
Thermoformer. Heating system Ceramic Heaters Manual Sheet loader Vacuum pump 2,2 kw...
2001 | 300045972 | VILLA
More information
Thermoformer. FC 600 E electrically driven thermoforming machine (vacuum-pressure forming, cutting, counting and stacking) Max. external forming mold dimension: 640x450mm Max. mould size with pneumatic side clamping frames: 600x450mm Automatic unwinder Sheet tran...
2010 | 300045660 | W.M. WRAPPING MACHINERY SA
More information
Thermoformer. Forming/Cutting/Stacking Vacuum and air pressure thermoforming (Possibility to form and cut in the same station) Max. external forming mould dimensions: 750x570mm Max. mould dimensions with pneumatic side clamping frames: 750x570mm Max part height up...
2015 | 300046709 | W.M. WRAPPING MACHINERY SA
More information
Thermoformer. Working hours per 17.05.2023: 19.524 hours Machine has been used for producing cups, coffee capsules, etc. Can put 2 Rolls on unwinder so can work continuously non stop Gabler 2 model Preheater Pick Up Stacker (can be sold without Stacker check pri...
2011 | 300046116 | GABLER
More information
Thermoformer. 140 KW 250 Amps Upper heater with quartz heating elements Upper & lower infrared heating Side and rear protection Pneumatic punch 4 cooling fans Supplied with 17 size reductions + under reduction + storage rack and handling tool for reductions Ser...
1988 | 300041888 | GEISS
More information
Thermoformer. Max sheet size 1010 x 1510 mm Min sheet size 510 x 510 mm Max mold height H500 Hours worked approximately 28,000h Halogen lamps Availability March 2023...
2006 | 300044950 | GEISS
More information
Thermoformer. Max. sheet width: 595 mm Clamping force: 60 t Output: 25 cycle/min. (depending on material) Max. unwinder reel diameter: 711 mm....
2005 | 300045283 | GN
More information
Thermoformer. Clamping and Cutting Force 72 Ton Sheet Width 840mm Material Roll Diameter 1200 mm It is possible to cut in the forming station Infrared heating ...
2015 | 300045444 | GN
More information
Thermoformer. Materials : ABS, Polypropylene (PP), Polyethylene (PE), Poly carbonate (PC), Polystyrene (PS), Polymethylmethacrylate (PMMA) Impact 7000, Makrolon Polyethylene foams Expanded materials (EPS) Types of products : Industrial parts Sanitary articles (h...
1985 | 300040990 | ILLIG
More information
Thermoformer. In mold cutting station Output: 40 Cycles/Min Mold closing force: 150KN Feed length: max 300mm Photo cell: IFM sensor Pneumatic plug assist Drive: Sew Eurodrive Control Panel: Schleicher Power of each heater: 20x650W, 70x400W Regulation of heating ...
1998 | 300042471 | ILLIG
More information
Thermoformer. Forming machine Forming area: min. 300 x 100mm Part height above/below material level: 100/30mm Material width: max./min. 540/340mm Feed accuracy (marked on the skeleton bridges): +/- 0.3mm Installed power upper heating: 9.8kW Installed power lower ...
1991 | 300043856 | ILLIG
More information
Thermoformer. Control was changed in 2015 Pneumatic Drive Sheet width: 1000mm Ceramic Heaters Power of Heater: 26kW 3 Heating Zones Power Consumption: 30kWh, 40 A Working hours 1000 ...
2014 | 300044501 | ILLIG
More information
Thermoformer. Forming machine ; Forming area min. : 300 x 100 mm Material width max./min. : 540/340 mm Part height above/below working height : 100/30 mm Material roll diameter : 1200 mm Suction capacity of vacuum pump : 40 m3/h Installed electrical load of top he...
2012 | 300045384 | ILLIG
More information
Thermoformer. Only 2640 Working hours The machine has an automatic changeover function, upper punch with pneumatic drive, mould table with pneumatic drive and position storage. Electric heating, individual heating pattern is stored, energy-saving mode during work...
2008 | 300045934 | ILLIG
More information
Thermoformer. Max Film width 730mm Scope of equipment: - Unwinder - Open preheating station - Heating station - Forming and punching station - Stacking unit - Grinder Technical equipment: - Siemens S5 control - Upper and lower heating - Pneumatic upper punch ...
1998 | 300045995 | ILLIG
More information
Thermoformer. 3 stations : forming - cutting - stacking Forming machine Forming area: min. 300 x 100mm Part height above/below material level: 100/30mm Material width: max./min. 540/340mm Feed accuracy (marked on the skeleton bridges): +/- 0.3mm Installed power ...
1995 | 300046015 | ILLIG
More information
Thermoformer. Thermoforming machine with automatic sheet loader Max. Plate width: 650mm Ceramic heaters Total heating elements: 30 kw Control of the heating elements: Top heating: 3 control circuits Bottom heating: 2 control circuits Equipment: -Screen control ...
1988 | 300046166 | ILLIG
More information
Thermoformer. ROK 550 reel holder, for reels up to 1200mm diameter Max. sheet width: 550mm Forming machine: Tool width between max. conveyor chains: 524mm Tool length in feed direction: 390mm Forming height above/below sheet: 100/40mm Thermoformed part height: 10...
2012 | 300046312 | ILLIG
More information
Thermoformer. ROK 550 reel holder, for reels up to 1200mm diameter Max. sheet width: 550mm Max. reel weight: 870kg Unwind speed with servomotor: 1-40m/min Unwind speed in manual mode up to 60m/min Max. sheet feed required by machine: 800mm Length: 1630mm Width: 12...
2010 | 300046311 | ILLIG
More information
Thermoformer. Forming surface min/max 300x100 mm/ 500x350 mm Sheet width min/max 300/550 mm 22 cycles/min in dry cycle Shaped piece height above/below sheet surface 100/40 mm Cutting force 300 kN Working hours 34178 Overhauled by ILLIG technicians in 2016, inclu...
1999 | 300046354 | ILLIG
More information
Thermoformer. Working hours 87361 Preassure air forming Min forming area 380 x 270 mm Max. Sheet width 800 mm Power of each heater: 31.5kW Control of heaters: PT100 Cycles/ minute: 80 Preheating incl: No Plug-Assist: Punch drive bottom and top Electrical use (...
2003 | 300045770 | KIEFEL
More information
Thermoformer. Working hours 55462 Control updated in 2022 Preassure air forming Min forming area 380 x 270 mm Max. Sheet width 900 mm Power of each heater: 38.25 Control of heaters: PT100 Cycles/ minute: 80 Preheater: No Plug Assist: Punch drive bottom Electri...
2004 | 300045772 | KIEFEL
More information
Thermoformer. Working hours 83774h Preassure air forming New display Min Forming Area 260 x 220 mm Max. Sheet width 570 mm Power of each heater: 15kW Control of heaters: PT100 Cycles/ minute: 60 No Preheater Form closing force: 200kN Plug-Assist from bottom El...
2000 | 300045769 | KIEFEL
More information
Thermoformer. 3 stations : forming - cutting - stacking Materials : PET, PP, PS, PVC Max mold size : 550x450 Max sheet width : 590mm Depth of draw : 120mm Sheet thickness min-max : 200-1500 microns Output : 20 cycles/min Mold closing force : 2 bar Feed length : 45...
2000 | 300038095 | PARCO
More information
Thermoformer. Unwinder motor power : 0.75kW Tilting power : 1.1kW Width max center line : 1200mm Weight roll max : 1000kg Forming station : Mold max dimension : 720x430 Depth max : 120mm Width foil : 150+740 Max thickness HIPS : 1.5mm Max thickness PS : 3mm Max...
1998 | 300042953 | TFT
More information
Thermoformer. Unwinder: motor power : 0.75kW Tilting power : 1.1kW Width max center line : 1200mm Weight roll max : 1000kg Forming station : Mold max dimension : 720x430 Depth max : 120mm Width foil : 150+740 Max thickness HIPS : 1.5mm Max thickness PS : 3mm M...
1996 | 300042952 | TFT
More information
Thermoformer. 3 stations : Forming / Cutting / Stacking Max. reel diameter: 1200 mm Sheet width: 900mm Heater length: 1570mm Closing force: 50,000daN Speed (dry cycle) : 40 cycles/min...
2000 | 300045838 | W.M. WRAPPING MACHINERY SA
More information
Thermoformer. MAIN PLANT UNITS: unwinder auto-centering sheet feeding sheet feeding bedplate conveying sheet heating forming cutting stacker winder AUTOMATIC UNWINDER Max. reel diameter : 1200mm Max. sheet width : 900mm Reel holder Nr. : 1 Unwinding : Autom...
2002 | 300046381 | W.M. WRAPPING MACHINERY SA
More information
Thermoformer. MAIN PLANT UNITS: unwinder auto-centering sheet feeding sheet feeding bedplate conveying sheet heating forming cutting stacker winder AUTOMATIC UNWINDER Max. reel diameter : 1200mm Max. sheet width : 900mm Reel holder Nr. : 1 Unwinding : Autom...
2004 | 300046429 | W.M. WRAPPING MACHINERY SA
More information