Used GEISS machines for sale

Geiss is a German leading supplier of plastic vacuum forming machines and trimming machines. It started in business as a mould maker in 1946 and it was established as a machine manufacturer in 1955. Geiss supports the single station closed chamber vacuum forming machines system. Geiss has accomplished three important development in the manufacturing of their machines: firstly they implement halogen heaters that reduces heating times of thermoplastics; secondly an infinitely adjustable clamping system of a close chamber vacuum forming machine, and finally it designs all its machines with a parametric system that allows the customer to choose the optimum machine type for his purpose. Geiss machines serve mainly the automotive sector followed by the transport sector (trains, buses, trains and aircrafts). They also serve other markets like the refrigerator industry, sanitary equipment, industrial lighting. MachinePoint sells used Geiss thermoformers and CNC Routers from different models and years.
GEISS DUGEISS FZ
  • Used Beverage Machines
  • Used Blow Molding Machine
  • Used Compounding Machines
  • Used Dairy Machine
  • Used Film Converting Machines
  • Used Film Printing Machine
  • Used Film Extrusion Machines
  • Used Injection Moulding Machine
  • Used Pipe Extrusion Machine
  • Used Profile Extrusion Machine
  • Used Recycling Machine
  • Used Thermoforming & Sheet Machinery
  • Used Fruits and Vegetables Machines
  • Other Used Machines

    • GEISS Machines sold in the past:

    Twin Sheet Thermoforming machine Automatic window frames adjustment IR radiant heater installed Automatic Sheet loader 2 Window frames included: Min under mold size: 621x400mm Max under mold: 1623x883mm Min under mold size: 951x438mm Max under mold: 1955x955mm Available in September 2024
    Machine was overhauled in 2023 and is in production .The seals, some heaters and other wear parts were replaced. Particularly noteworthy is the short cycle time due to the SPEDIUM Heaters and the fast speed. Equipment: - Automatic Sheet Loader - Top heating with SPEEDIUM heating elements individually controlled via monitor - Movement motorized via crank rocker - Bottom heating with SPEEDIUM heating elements individually controlled via monitor - Movement motorized via crank arm - Pyrometer - Pneumatic upper stamping unit - Mold table stroke pneumatic and temperature controlled via cooling plate - Pneumatic clamping frame - 4 cooling fans - Automatic demolding/pre-blowing system - Slack control via light barrier with supporting air - Motorized adjustment of parallel clamping frame - Window plate motorized adjustable - Vacuum pump - Front door with pneumatic lock for easier mold change - Siemens control system - Brush between feeding and forming machine for brushing off the products - Manual side and back gauge adjustment in BSM
    Twin-Sheet Thermoforming machine with automatic sheet loader and only 20.000 working hours New screen and new cylinders in lifting table replaced by Geiss last year Forming area max and min (mm) 2200x1300 - 1150x750 Control of heaters: Sinumerik Quartz heaters 3 vacuum pumps
    Travel / Speed / Acceleration X axis : 2450mm / 120000mm/min / 7000mm/s2 Y asis : 1400mm / 100000mm/min / 7000mm/s2 Z axis : 800mm / 60000mm/min / 1200mm/s2 B axis . 285º / 14275º/min / 1200 º /s2 C axis : 520º / 21600º/min / 1200º/s2 Milling spindel / Max speed / Power Z axis : GEISS / 30.000U/min / 6kW Vacuum pump 100m3/h Fa. Busch Cooling unit Weco 02 KLE Fa. GWK Power rating : 42kW Nominal current : 64A Safety feature : 100A Basic machine : 36.8 kW -- 4054kg Vacuum pump : 3.6 kW ---- 100kg Cooling : 1.55kW ----7.92kJ/h ---110kg Operating pressure : 6 bar Max. pressure : 8bar (hoses) Air requirements approx. : ca. 5 l/cycle Machine recently repaired/maintained for around €20.000. Machine in very good running condition. The only work still needed is an additional mechanical calibration of the Z-axis. The Z-axis ball screw assembly has been replaced, the table has been removed and straighten and the whole machine has been calibrated. Also replaced the RH Y-axis encoder
    Vacuum forming machine Additional photocell for sheet level Photocell for automatic limiting of pre-blow height Digital radiation pyrometer built in the top heater to control heating time Motorises stepless window plate adjustment in both axis Preparation for sheet loader 1 frame included

    Do you need advice?

    We will guide you through the entire process of buying and selling used machinery in a changing and complex international environment. Our sales, logistics, legal, and marketing teams will accompany you throughout the process to make the operation easy and risk-free.

    Contact Us

    First and Last Name *
    Please input your name
    Contact Phone *
    Please input your contact number
    Company *
    Please input your company name
    Email address *
    Please input a correct email address
    City *
    Please input your city
    Country *
    Please input your Country
    Comments *
    Please input your comments
    To continue you must accept Personal Data Processing Policy.