Used GREINER machines for sale

Few working hours Scope of delivery 1x Calibration table: Red.Cal 11, 2 - 3P/12 GW Technical data: Clamping frame length 11185 mm Clamping frame width 380 mm Clamping frame height min. 940 mm Clamping frame height max. 1,040 mm Clamping frame rail spacing 320 mm Longitudinal adjustment 750 mm Height adjustment 100 mm Side adjustment 25 mm Vacuum pumps 3 ST Suction capacity Vacuum pump 120 mbar 60 m3/h Motor power Vacuum 400V/50Hz 1.45 kW Dimensions: Length 11,200 mm Width 1,100 mm Height 1,200 mm 1x Haul off + Saw: Red.COM 30/10-235-C/235RC Technical data Extraction height (lower edge of profile) 1040 - 1140 mm Max. profile width 235 mm Max. profile height 140 mm Total number of lugs 110 ST Extrusion speed min. 0.5 m/min Extrusion speed max. 10.0 m/min Cutting accuracy +/- 2.0 mm Max. pull-off force 30 kN Compressed air connection 1.0 m3/h Dimensions: Length 5,905 mm Width 1,100 mm Height 1,810 mm

High-speed thermoforming machine and mould system suitable for the production of high quality PP/PS cups 1/ TR4 (“Thermo-runner 4”) c/w accessories Year 1998 (refurbished) Touchscreen with menu-driven software Nominal capacity of pre-heaters : 53.2 kW Nominal capacity of upper longitudinal heaters : 25.5 kW Nominal capacity of upper cross-heaters : 6 kW Nominal capacity of lower heaters : 26.5 kW Nominal capacity, total : 145 kW Number of revolutions of main drive : 3510 rpm Nominal capacity of motor main drive : 13.2 kW Preliminary fuse protection, max. 250A Max. production speed : 45 cycles/min Punching force : 200kN Mould : Width max. : upper mould : 779mm , lower mould : 779mm Length max. : upper mould : 450mm , lower mould : 400mm Length min.. : upper mould : 380mm , lower mould : 360mm Height max.. : upper mould : 270mm , lower mould : 185mm Sheet width max. : 560mm Sheet width min. : 150mm Refurbished by Kiefel Mould&Matic Include various upgrades done between 2017 and 2021, which consists of :  PLC Computer Input card and Module (Brand : GE Fanuc)  CPU IC693CPU374 (Brand : GE Fanuc)  Plug Assist Servo Motor, Positioning Controller & Comms Module Set  Main motor new unit 2 / Semi-Automatic Pick-Up Stacker (“PUS”) c/w accessories Year 2014 Kiefel Mould&Matic Weight approx. 3200kg Dimensions : 5400 x 2300 x 2600mm Stacking rows : 1-6 Cycle speed max : 45 cycles Stack length : 500-800mm Stacks, max. : 15/min Item diameter : ø 50-150mm 3/ 1x Unit of PP Ø73.8mm Cup 18-cavities Mould c/w accessories Kiefel Mould&Matic (Germany/Austria) Include various upgrades done between 2017 and 2021, which consists of cutting plate and clamping plate, body inserts, etc

- GREINER calibration bench type CAL.MOD 3.5 m + module 3.5 m = Total 7 m n.2 vacuum pumps of Kw. 4.0 n.4 connections for water/vacuum separator siphons with vacuum and water pump 15+15 water connections with ABA ½" quick couplings 12+12 vacuum connections with ABA ½" quick couplings Electro-assisted height and longitudinal adjustment Manual lateral adjustment Profile drying fan Line control panel - Puller/Cutter combination CAT.PUL 10/10-235 Tilting pull 1.3 m long Runner width 250 mm. Max. passage 315mm Pulling force: 12000 N Cutter with disc from DN. 300mm ( Max. DN. Possible 400mm ) Puller/cutter speed synchronisation Chip extractor - 3 m GTT tilting device with pneumatic control

PVC window frame profile moulds - Producer – Greiner / Austria - Calibrator – two pcs x 230 mm - Vacuum downstream – 3 m. - Condition – excellent

Greiner downstream for PVC profile extrusion -GREINER calibration table type CAL.MOD 3.5 m + extension 3.5 m 2 vacuum pumps n.4 connections for water/vacuum separator siphons Connection hoses for water and vacuum with quick couplings Electro-assisted height and longitudinal adjustment Manual lateral adjustment Profile drying fan Line control panel - Puller/Cutter combination CAT.PUL 10/10-235 Tilting pull 1.3 m long Belt width 250 mm Cutter with 300 mm disc Puller/cutter speed synchronisation Dust exhauster - GTT Tilting table 3 m with pneumatic control