ILLIG thermoforming machines used for sale

Illig is a German brand of machinery for the production of thermoformed products with more than 60 years in the market. Its thermoforming machinery for sale is used for the production of products such as: plastic doors, yogurt cups, plastic food containers, automotive parts, toy packaging.
MachinePoint has used thermoforming machines for sale, used cutting presses and blister skinpack machines. The thermoforming machine models for sale are: SB74, RDK and RDM mainly. The Illig RDM-K is mainly used for the production of cups and tubs from many cavities. Illig UA thermoforming machines are highly efficient. The Illig RDK 90 thermoforming machines are used for the manufacture of trays and packaging of fresh products. The model RDM 70K is suitable for yoghurt containers.
ILLIG RVILLIG SBILLIG HSPILLIG RDMILLIG VHWILLIG UAILLIG HSA
  • Used Beverage Machines
  • Used Blow Molding Machine
  • Used Compounding Machines
  • Used Dairy Machine
  • Used Film Converting Machines
  • Used Film Printing Machine
  • Used Film Extrusion Machines
  • Used Injection Moulding Machine
  • Used Pipe Extrusion Machine
  • Used Profile Extrusion Machine
  • Used Recycling Machine
  • Used Thermoforming & Sheet Machinery
  • Used Fruits and Vegetables Machines
  • Other Used Machines

    • ILLIG Machines sold in the past:

    Forming area min. 300x100 mm Forming height above/below sheet : 100/30 mm Sheet width: max./min. 550/340 mm Max. number of cycles: 18/minute depending on materials Pneumatic system Plug assist Vertical adjustment of the lower part of the forming table Stacking unit with unloading
    Thermoformer : Forming area min-max : 100x300 - 350x500mm Height of forming above working level max : 100mm Height of forming below working level max : 30mm Width of material min-max : 340-540mm Connected load of upper heating : 9.8 kW Length of upper heating : 875mm Connected load of lower heating : 5.6 kW Length of lower heating : 500mm Stroke of lower frame : 45mm Diameter of material roll : 600mm Cutting : Max. cutting area : 350x 500 mm Cutting pressure : 250 kN Min./max. height of cutting line : 80/110 mm Connected load of heater for steel rule die : 4kW Complete machine (Thermoformer and cutting) Number of cycles max. : 20 Total connected load with upper heating : 13.7kW Total connected load with upper and lower heating : 19.3kW Total connected load with upper and lower heating and heating of steel rule die : 23.3 kW Total air consumption/cycle with max. stroke length : 45 NL Operating pressure min. : 6 bar Recommended actual capacity of compressor : 1,200 NL/min. Roll diameter of skeletal web max. : 600 mm Working level above floor : 1,100mm Total width incl. control cabinet : 1,930mm Total length incl. material roll stand : 6,330 mm Total height : 2,050 mm Weight of machine 3000 kg This machine has a Motoman robot installed that was used to collect the parts produced and stack them on a conveyor belt. This was important due to the size of the parts that has been produced (too small) The machine has 193.111 working hours but had a big inspection and a lot of critical parts replaced by Illig in 2022.
    Max. sheet length: 1000mm Max. sheet width: 700mm Forming area: 960x660mm Max. negative/positive forming depth: 300mm Automatic bubbling controlled by photocell Pneumatically-driven top piston, motorized remote stroke adjustment, standard changeover program, digital speed adjustment (7 levels) via valve cascade, automatic clamping included 4 reinforced fans at 22 m3/min 4-nozzle water mist cooling system BE P loading and unloading unit for working from the sheet stack Sheet magazine Loading device with quick-fit suction sheet holder Double grip control Automatic adjustment of transport width and length Sheet magazine with automatic plate centering device by motorized columns, with settings backup, changeover program, motorized sheet strippers. Upper and lower preheating on loading unit with possibility of mounting a thermoregulated holding frame for working with a sealed box with pneumatic sheet support, "Joystick" upper preheating with 5-zone control, lower preheating with 3-zone isothermal control Vacuum pump for pick-up of grained sheets Working hours : 5718 Available for sale too (not included in the price) : Horizontal band saw Hema HTR 600 year 2001
    Min-max material width: 150-495mm Min-max feed: 50-280mm Upper heating power: 9.5kW Lower heating power: 6.9 kW Installed power: 18.3 kW
    Automatic roll-fed machine for forming/punching operation Included Vacuum system for sheet entrance which remove the chances contamination Inline grinder with conveying system up to 6m vertical + 20m horizontal distance Product takeout system which has possibility to connect with packing system

    Learn more about ILLIG and its machinery


  • Foundation and Evolution: ILLIG was founded in 1946 by Adolf Illig in Heilbronn, Germany. Originally started as a mechanical repair workshop, it became a global leader in thermoforming machinery. In 1964, ILLIG founded its mold and tool shop, and in 1967, significantly expanded its production. Over the following decades, the company introduced multiple innovations, such as tilt technology in 1984 and in-mold labeling (IML-T®) in 1993. Throughout its more than 75 years of history, ILLIG has established multiple global subsidiaries and developed a strong reputation for innovation and quality in the thermoforming industry.
    • ILLIG machines enable the production of:
  • Thin-walled plastic containers for food and beverages.
  • Medical trays and devices.
  • Automotive components.
  • Blister and skin packaging.
  • Horticultural products like plant pots.
    • ILLIG incorporates various advanced technologies in its machines, such as:
  • IML-T® (In-Mold Labeling): Reduces weight and offers a wide range of graphic options.
  • TLC® (ThermoLineControl): Centralized control concept that improves productivity and facilitates line operation.
  • IC (Intelligent Control Concept): Intelligent control system that optimizes thermoforming processes.
  • Vacuum and Pressure Forming Technologies: To produce high-quality parts with recyclable and biodegradable materials.
    • In the industry, ILLIG machines are also known as thermoforming systems, vacuum and pressure forming equipment, and in-mold labeling machines.
    ILLIG machines, renowned for their quality and efficiency in the plastics and packaging industry, offer a wide range of prices depending on the type of equipment. Used ILLIG Trim Presses have an average price starting from €13,000, making them an economical option for specific cutting and forming operations.
    Used ILLIG blister and skin machines, used for secure and attractive product packaging, have an average price of €25,000. These machines offer excellent value for money, providing efficient solutions for product protection and presentation.
    On the other hand, Used ILLIG thermoformers, essential for the production of high-quality, precision packaging, have an average price of €60,000. These machines are highly valued for their ability to produce large volumes with superior quality, justifying their higher cost.

    Do you need advice?

    We will guide you through the entire process of buying and selling used machinery in a changing and complex international environment. Our sales, logistics, legal, and marketing teams will accompany you throughout the process to make the operation easy and risk-free.

    Contact Us

    First and Last Name *
    Please input your name
    Contact Phone *
    Please input your contact number
    Company *
    Please input your company name
    Email address *
    Please input a correct email address
    City *
    Please input your city
    Country *
    Please input your Country
    Comments *
    Please input your comments
    To continue you must accept Personal Data Processing Policy.