EPS Shape Moulding Machines. The machine is designed for the production of moulded polystyrene foam products. The moulding process is carried out using water steam and a vacuuming process in full automatic mode. Approximate water steam consumption: 450 kg/h (0.15 MPa) Approxima...
2018 | 300044375 | IZOTERM
More information
EPS Shape Moulding Machines. EPS forming machine with mould for the production of EPS formwork blocks In one cycle the machine produces 2 blocks open on both sides and 1 block closed on one side (see photos) Block size: 1000 mm x 250 mm x 250 mm Block wall thickness: 50 mm T...
2008 | 300044377 | IZOTERM
More information
EPS block moulding. Foam block mould is used for pressing single foam grains into blocks by applying a temperature factor (water steam). Block dimensions including allowance: 3060 mm x 1250 mm x 1050 mm (see photos) Output capacity: 80 m3/h Steam requirements: p = 0,...
2006 | 300044374 | IZOTERM
More information
EPS Shape Moulding Machines. EPS forming machine with mould for the production of U-shaped corners for door packaging With installed mould, it is possible to produce U-shaped corner with the following dimensions: 1000 mm x 60 mm x 60 mm (see photos) Corner wall thickness: 9 mm ...
2010 | 300044379 | IZOTERM
More information