Linea di estrusione di profili in PVC: PTI DS 92/28 - DS 68/28 del 2007 usata

Scheda Tecnica: PTI DS 92/28 - DS 68/28 Usato

Rif.: 300031852

Marca: PTI

Anno: 2007

Altri Dati:

1. Twin screw extruder DS 92/28 with single degassing and filter cooled by water
Motor Siemens Servomotor - 60 kW
Screw rotation 15 700Nm
Screw speed 0-28 rotation/min.
Heating zones (ceramic) on barrel 5x5 kW
Cooling zones on barrel (air cooling) 4
Output by documentation 460 kg/h
3 x volumetric dosing unit for material + additives and masterbatch
Heat sensor on extruder (Dynisco)
Dimensions: 4500 x 1600 x 2300 mm
Control by Siemens Extrusion Pro Pak

2. Second extruder double screw DS 68/28 with single degassing and filter cooled by water
Screws diam. 68 mm
L/D 28
Motor Siemens Servomotor 30 kW
Screw rotation 6200Nm
Screw speed 0-38 rotation/min.
Heating zones (ceramic) on barrel 4x2,5 kW
Cooling zones on barrel (air cooling) 4
Output by documentation 220 kg/h
2 x volumetric dosing unit for material for upper layer + masterbatch
Heat sensor on extruder (Dynisco)
Dimensions: 3500 x 1400 x 2300 mm
Control by Siemens Extrusion Pro Pak

3. Feed-block
Welding of two layers in proportion of 1:4—1:6
Heating 1 zone 2,5kW

4. Die head 15” (381mm)
3 x heating zones
Connected to feed-block
Set of tools for die regulation

5. Unit with cooling and embossing cylindres PTI KA 600
2 x Smooth, bimetallic cylindres, cromed, cooled by water diam. 305x610mm
1 x Embossing cylinder with wooden pattern, cromerd, cooled by water
1 x Rubber cylinder (rubber thickness 10 mm, hardness 70+/-5 Shore A) cooled by water
1 x pressure roll cromed, diam. 60x610mm for rubber cylinder
2 x Cromed rolls 60x610mm
Thermostatic device for 3 rolls (2 cromed smooth rolls and rubber roll)
Thermostatic device for embossing cylinder

6. Calibrating table with tank KT 3/4000.
1 x Water pump 3kW
2 x vacuum pump 3kW
1 x drying vent 1,5kW
Device to adjust table heigh from 900-1100mm
Possibility to transversal regulation of the table
Frame for calibrators and cooling tank 500x4000

7. Perforation unit with special punching device for dewatering holes
Distance and shape of holes as on photo (profile)

8. Haul off ABR 6
Max. product size height 100mm and width 350mm
Drive Siemens 2x1,1 kW
Speed 0-30m/min
Pulling height 1100-1200mm
Pulling rolls with pneumatic pressure IPulling power 8000N

9. Saw type guillotine SA 3
Cutting knife with drive Festo diam. 100mm
Max. speed of the line 30 m/min
Cutting accuracy +/-1mm/1m
Max. cutting width 350 mm

10. Stacking and packing table

11. Additional equipment
- Wrapping machine to cover hot PVC by decorative PMMA film
- Additional thermostation devise for rubber roll
- Licence for programs for line