Data Sheet of Used KYMC FX 8120
Ref. 300042724
Year: 2010
Brand: KYMC
Model: FX 8120
Status: For sale
Delivery time: Immediate
Technical Specifications
Printing Width: 1170 mm
Web Width: 1200 mm
Printing Repeat (Max): 1000 mm
Printing Repeat (Min): 360 mm
Plate-Cylinder Gear-Pitch Module: 5 mm
Drying System: Electrical
System: Geared
Other Specifications:
Materials: LDPE, LLDPE, HDPE, Polypropylene, Polystyrene, Polyester, Metallized films, Light weight paper, etc.
Min. printing width: 55% of the max. web width.
Max. machine speed: 300 m/min
Printing speed: 250m/min, the effective printing speeds will depend on several printing conditions.
Heat source: Electric elements
PRINTING SECTION
Micrometric adjustment of pressure on every axis.
Between colour drying modules made of stainless steel with dampers.
Motorized forward and backward control of printing station by push button.
Pre-register for quickly set-up of printing registration.
Water conditioning devise to maintain drum at exact temperature while running the machine or during operation stopped.
OVERHEAD STRUCTURE
All aluminium idle rollers.
Extended final drying tunnel.
2 drying blowers with heaters and dampers, one for the oven & one for the in between colour dryers.
2 exhaust blowers, one for the oven & one for the in between colour dryers.
Infeed automatic edge position control. (E&L Germany) > must be fixed, not working.
Static bar prior to print.
UNWIND SECTION
Outside diameter of reels: max. 800mm.
Indexing of arms through auxiliary AC motor and reducer with AC vector drive from YASKAWA.
Two unwinding stations, driven by two AC vector motors, controlled through dancing roller for
automatic tension regulation.
Pneumatically activated cutting group for automatic flying splice at full production speed.
Air shaft (2) with expansible rubber lather for cores having internal diameter 76mm.
REWIND SECTION
Outside diameter of reels: max. 800mm.
Indexing of arms through auxiliary AC motor and reducer.
Two rewinding stations, driven by two AC vector motors, controlled through dancing roller for the automatic tension regulation.
Reel change sequence to be activated by the operator: start of the free reel shaft; once it has reached the same speed of the machine, the operator can then activate the splice.
N°2 shafts, with expansible rubber lathes for cores having internal diameter 76mm.
PNEUMATIC dancing roller for automatic tension control on rewinder.
Static bar after print.
Sleeves :
8 x (490,520,550,580,600,620,710,740,800,850,870,910,1000)
11 x 680
9 x Carrier for 680 mm to 850 mm
9 x Carrier for 850 mm to 1000 mm
Anilox : (Line L/cm - cm3/m2)
80 - 12,0 (damaged, not in use)
100-10,0
115-9,0 (damaged, not in use)
120-8,2
120-8,4
120-10,2
140-16,2
280-3,7
315-3,0 (2x)
315-3,2
MOUNTER PROOFER MODEL: SM-1200 included:
Maximum repeat of plate cylinder: 1000mm
Minimum repeat of plate sleeve: 400mm
Maximum width of plate sleeve face: 1200mm
Electric supply: 220V/1p/50HZ
Other Details:
Guarantee: Without guarantee
Current condition: Not running. Can be shown in dry cycle
Availability: Immediate