INDUSTRIAL DYNAMICS ForceBoard Multisystem
ESKO CDI (Cyrel Digital Imagers) Spark 4260
DAVIS STANDARD
GEA FX PP450 NH3
MATSUURA H405 plus
SENFENG FLK 120
HST PT 25.2 B
GÜNTER L-1600 826G10
Ref.: 300043104
Brand: CHARPY
Year: 2011
Other Specifications:
LABORATORY EQUIPMENT (may be purchased separately)
A) Lloyd's LR150K PLUS Tensile Testing Machine 2011
B) SPECTROTEST TXC25 Mobile Spectrometer for Metal Analysis from SPECTRO 2011
C) Charpy 300J - PIC-300 impact pendulum purchased from Metrotec in 2011.
CHARACTERISTICS
A) Tensile machine:
Maximum force (tension and compression): 150 kN (33,721 lbf)
General force range using
Interchangeable load cells: 0.1 N - 150 kN (0.02 - 33,721 lbf)
Force measurement system: exceeds the requirements of BS EN ISO 7500-1: 1999 - Class 0.5 ASTM E4, DIN 1221
Force measurement accuracy: better than 0.5%.
Crosshead speed range at full load: 0.001 - 254 mm / min (0.0004 - 10 in / min)
Crosshead speed accuracy: ± 0.2% at steady state at 100 mm/min and above. Reduced at lower speed, but better than 1% at 0.5 mm / min.
Maximum working width between columns: 620 mm (24.4 in)
Crosshead vertical travel: 1050 mm (41.34 in.)
Crosshead position accuracy: <0.1 mm (<0.1 mm)
Internal extension resolution: <0.5 microns (<0.5 mm)
External extensometer connection.
(Using Lloyd Instruments interface connector): Analogue (± 10 V) or spot meter. Digital encoders (single or double differential).
Data output for computer / serial printer: RS 232
Supply voltage: 230 V a.c. ± 10% 50-60 Hz (fuse T5AH250 V)
115 V a.c. ± 10% ± 10% 50-60 Hz (fuse T10AH250V)
Power consumption: <1000 VA
Main frame dimensions
Height 2508 mm (98.74 inches)
Depth 733 mm (28.86 in.)
Width 1204 mm (47.4 inches)
Mass (without handles and load cell installed): 150 kg (330 lb)
Temperature
Operating: 40ºF to 95ºF (5 to 35ºC)
Storage: -4ºF to 130ºF (-20 to 55ºC)
Ventilation Requirements: Unrestricted air flow to side vents
Humidity: 5 to 85% RH (non-condensing)
B) Spectrometer:
Electrical connection: 100 - 240V, ±10%, 50/60Hz (acc. to DIN EN 61010-1)
Power during test process: 400 W
Power in stand-by mode: 100 W
Fuse protection - power supply line: 16 A (slow blow)
Storage conditions: -20 - 50ºC; -5 -120ºF
Temperature range: 5 - 40ºC; 40 -105ºF (according to DIN EN 61010-1)
Air humidity: max. 80% (acc. to DIN EN 61010-1)
Argon connection
Inlet pressure: 5 bar ±10%; 72 psi
Quality: ≥ 4.8 (99.998%)
Consumption - standard probe:
Constant flow: 15 l/h
Analytical flow: 120 l/h
Flushing (Flush): 120 l/h
Consumption - UV probe:
Constant flow: 15 l/h plus 10 l/h UV optical system
Analytical flow: 120 l/h
Flushing: 185 l/h
Protection class: IP 23 (DIN 40050)
Height: 640 mm (25,2")
Width: 425 mm (16.7")
Depth: 250 mm (9.8")
Weight: 29 kg (63.9 lbs)
C) Charpy Pendulum:
Capacity or Impact Energy: 300 J
Impact Velocity: 5.42 m/s (5.42 m/s)
Readout Type: Digital (PT-DUR Processor)
Scales: 300-303 J ± 151-153
Reading resolution: 0.3 J /0.2°.
Standards used: EN 10045, ASTM E23
Drive
-Lift: Motorised
-Brake: Drum, foot pedal operated
Accessories included:
-Impact blade (fitted)
-Blade and support centring tester.
Tongs for placing specimen between supports.
-Integral transparent polycarbonate protection.
Dimensions
-Base: 860 × 660 mm
-Height:
1250 mm (with hammer at rest).
2000 mm (with the hub in the upright position).
2150 mm (with guard).
Weight of the hammer: 20.4 kg approx. (200 N)
Weight (machine): 400 kg
Do you need advice?
We will guide you through the entire process of buying and selling used machinery in a changing and complex international environment. Our sales, logistics, legal, and marketing teams will accompany you throughout the process to make the operation easy and risk-free.