Used Thermoformer: ILLIG UA 225 / 4g BE of 2000

Data Sheet of Used ILLIG UA 225 / 4g BE

Ref.: 300043261

Brand: ILLIG

Year: 2000

Other Specifications:

Type : UA 225 / 4g BE with charging unit preheating - / finished heating

Max. sheet size : 2270x1270mm
Min. sheet size : 510x460mm
Min. sheet area : 460x110mm

General : - Control via Siemens OP 37
- Total connected load : approx. 286 KW
- Vacuum pump Leybold SV 300
- Current operating hours = 43157

Basic machine ( UA ) Equipment :

∙ Tempering connection upper / lower frame
∙ Upper heating 8 position switch
∙ Lower heating joystick
∙ Light barrier control pre-blow automatic
∙ (OST): - remote adjustment
∙ Vacuum forming device on the upper punch
∙ Loose part control at the moulding table without elec. Query
∙ Loose part control at the OST without elec. Query
∙ 8 - fold cooling fan amplified 176 m³/ min
∙ 8-fold spray nozzle device
∙ Automatic central lubrication on the moulding machine
moulding machine
∙ Clamping frame holder for the use of ED - lower frame with installation from above

Insertion unit ( BE ) Equipment :

∙ Automatically adjusting centring bars for plate magazine
∙ Top heater 8 position switch
∙ Bottom heater joystick
∙ Automatic central lubrication at the
Feeding
∙ Vacuum pump for suction plate

Upper heating 90.00 kW
Bottom heating 54.00 kW
Vacuum pump 300 m3/h 7.50 kW
8 cooling fans, type D-05 4.24 kW
Lower frame lock 0,25 kW
Top ram stop adjustment 0,25 kW
Top heater charging station 90.00 kW
Bottom heater loading station 54,00 kW
Plate magazine adjustment 2 x 0,12 kW 0,24 kW
Vacuum pump suction plates 0,25 kW
Transport lift motor 1.10 kW
Transport drive motor 2.40 kW
Plate lifter motor 0.88 kW
Transport width adjustment motor 0.75 kW
Machine control 1.0 kW
Temperature control unit socket 13.00 kW
Total connected load 319.86 kW

Frames included: (lower and upper frame).
Quantity approx. 50 pcs.(sizes from 660 L x 660 W up to 2220 L x 1220mm W)

Possibility of installing a lower frame from above, Quantity approx. 52 pcs.
(sizes from 865 L x 465 W up to 2150 L x 1220mm W)

Also base plates ( for the tool holder table ) in different sizes could be included if required. (can be negotiated)

Compressed air supply: Nominal pressure 6.0 bar
min.4,5 bar
max.10,0 bar
Total air consumption / cycle at 6 bar 2643 ltr.