Used Thermoformer: ILLIG RV74B of 2005

Data Sheet of Used ILLIG RV74B

Ref.: 300043345

Brand: ILLIG

Year: 2005

Other Specifications:

2 stations : Forming - Cutting

1/ Automatic forming unit :
Forming area min-max: 400x250 - 704x514mm
Tool width between film transport spars min-max: 420-724mm
Tool length in feed direction min-max: 274-538mm
Effective film width = outer dimension of clamping frame + 25mm
Film width min-max: 454-760mm
Gap dimension per side - max: 12mm
Film thickness (depending on material type) min-max: 0.18 - 2mm
Feed length min-max: 250-540mm
Formed part height above film level - max: 120mm
Formed part height below film level - max: 40mm
Total height of formed part - max: 120mm
Table travel upwards - max: 160mm
Table travel downwards - max: 195mm
Blow box stroke - max: 60mm
Upper heater length: 2000mm
Lower heater length: 1875mm
Vacuum pump flow rate - max: 100 m3/h
Mold clamping force - max: 80 kN
Forming pressure - max: 2 bar
Heat output - max: 40.000 kJ/h
Cooling water connection to the machine: 1 inch
Pneumatic connection to the machine: 1 inch
Compressed air tank: 12 liters
Operating pressure: 6-10 bar
Maximum speed: 30 rpm
Film level above floor: 1250mm
Total length with roll holder: 5470mm
Total length with control cabinet: 2615mm
Height: 2620mm

Individual electrical connection values:
Upper heater: 28.8kW
Lower heater: 27 kW
Vacuum pump: 3 kW
Table drives: 14.8 kW
Film transport drive: 3.9 kW
General electrical connection: 78 kW

2/ Cutting machine:
Max. cutting force: 500 kN
Cutting dimension in the direction of feed - max: 500mm
Cutting dimension across the feed direction - max: 700mm
Cutting height above film level - max: 120mm
Cutting height below film level - max: 40mm
Top table tool mounting height min-max: 80-140mm
Mounting height of the lower table tool - min: 60mm
Total length with manual removal: 5600mm
Width: 2615mm
Height: 2250mm

Individual electrical connection value:
Table drive: 7.4 kW
Heating of the cutting net: 7.2 kW
Max. heating plate temperature: 200 degrees

3/ Rewinder (integrated in the frame) :
Max film reel diameter: 600mm
Air consumption per rewinder cycle: 5 NL

Cooling system included with the machine