Used Twin-screw extruder for other materials: COLLIN ZK 35P-56L/D of 2008

Data Sheet of Used COLLIN ZK 35P-56L/D

Ref.: 300043360

Brand: COLLIN

Year: 2008

Other Specifications:

Large laboratory line for compounds with extruder Collin ZK 35P - 56L/D.

System in top condition and very inclusive design (with different gravimetrics and dosages for solids and liquids and two granulating systems (strand and UWG).
The main parts of the line are made of corrosion-resistant and wear-resistant materials.

Consists of:

Melt pump and filtration device.
Hopper for base polymer: 25 L
Hopper for crushed rubber: 25 L
Hopper for mineral filler: 50 L
Hopper for additives: 10 L
Gravimetric dosing unit for base polymer
Gravimetric dosing unit for crushed rubber
Gravimetric dosing unit for mineral fillers
Gravimetric dosing unit for additives
Twin screw side feeder
Tank for melting PE wax: 50 L
Tank for feeding the dosing pump with molten PE wax: 25 L
2 x containers for vaseline oil: 10 L
Dosing pump for molten PE wax
2 x vaseline oil dosing pumps
2 x atmospheric degassing device
Vacuum degassing device
Automatic filter changing device

Strang head with eccentric geometry, with 4 holes
Water tank on moving frame: 3000 mm
Water evacuation unit
Heat exchanger to be installed in the water bath
Water thermostat: 20-85 Ñ
Strang granulator, CSG 174 type
Speed: 12-60 m/min
Pellet size: diameter 3mm x 3mm
Number of strands: 4

Complete set of equipment for underwater granulation
Productivity: 30-70 kg/h
Pellet size: 2.4 gr/100 pellets
Labline water system
TVE700ED dryer
Siemens S7-300 control system

Spare parts included

Operating hours: approximately7500.