ABG DIGICON SERIES 2
ROTOSTAR Rotostar 400
KARLVILLE K1
DURST R 330- LS
TCE PM 1300
BIEFFEBI Omnia 336 180D
BIEFFEBI Omnia 336-180C
CENTRAFLEX Type III
Ref.: 300043786
Brand: NEW FOIL
Year: 2007
Other Specifications:
Two station machine, one hot-stamping/embossing, one die-cutting/embossing, unwind, rewind, waste rewind and electronic web re-register unit.
Print area: 230 x 230mm
Die-cut area: 230 x 230mm
Web width maximum: 250mm
Web width minimum: 25mm
Unwind capacity: 500mm Ø
Rewind capacity: 400mm Ø
Stamping foil: 120mm Ø (160mm as an option)
Stamping foil, max width: 250mm
Core sizes: 70 or 76mm Ø
Speed – minimum: 2000 impressions per hour
Speed – maximum: 18000 impressions per hour
Main motor: Servo with dwell control
Web indexing minimum: 0.1mm
Web indexing maximum:1000.00mm
Web indexing increments: 0.1mm (with skip cycle)
Web indexing motor: Servo, with adjustable/variable timing
Foil indexing: Two independent draw units
Foiling indexing minimum: 0.1mm (foil saver standard)
Foil indexing maximum: 250mm (with skip cycle)
Foil indexing motors: Servo 2off with variable timing
Unwind tension: Vacuum drum with laser controlled loop
Unwind motor: Variable speed with inverter controlled drive
Rewind: A.C. three phase reversible motor with pneumatically operated dancing arm
Waste rewind: A.C. three phase reversible motor with two adjustable tension rollers
Dimensions: 300cm long x 130cm wide x 170cm high (200cm with laminator)
Control System Hardware
P.L.C. Logic Controller
4 Axis CIP/Ethernet Control System
4 Kinetix Servo Drives (Maindrive, Foil Draw x 2, Web Draw)
HMI panel 6” Colour Touch-screen
Direct Remote Access Unit
Allows direct remote access via the internet to the Newfoil machine. The unit connects to your company’s network using a readily available Ethernet network cable. Firewall friendly and fully secure SSL - based VPN tunnel.
Language: English
Guarding: Totally enclosed “clear-view” guarding with interlocked doors front and rear
C.E. Mark: Each machine carries the CE mark and is individually certified
Power supply: 3 phase A.C. 380V – 415V 50Hz / 60Hz + Neutral
Consumption: Typically 3kW per hour
Warm-up time: 14°C to 150°C, 5 minutes
Compressed air supply: 4 Bar (60 PSI) consumption minimal
Noise level: 60 dB to 80 dB typical
Do you need advice?
We will guide you through the entire process of buying and selling used machinery in a changing and complex international environment. Our sales, logistics, legal, and marketing teams will accompany you throughout the process to make the operation easy and risk-free.