Gebrauchte ROCHELEAU R4 Jahr 2007 zum Verkauf

Screw Mechanism • 1.5” (38 mm) dia., 24/1 (L/D) reciprocating screw • Bi-metallic barrel • Hydraulic motor screw drive, variable (0-175 RPM) • 70 lbs/hr (32 kg) HDPE output • 200 grams maximum shot size, HDPE • 75 lb. (34 kg) hopper capacity • 3.25” x 8” stroke injection cylinder Clamp Mechanism • 5 tons force • 2.5” bore x 10” stroke hydraulic cylinder • 6” minimum platen opening, 20” maximum platen opening • 10” x 10” (L x W) usable platen area • T-square arrangement for rapid mold installation Hydraulic • 19GPM variable volume, pressure compensated piston pump • Manifold mounted directional valves and flow controls • 35-gallon reservoir capacity, with level/temp safety switch • Spin-on filter element with indicator gage Electrical • 25 HP, 1800 RPM, 220/440 volt, 3 phase, 60 Hz motor • 220 volt heater bands, 9.3 Kw heater load, single head • Two-zone extruder temperature controls, fan cooling • Individual die head temperature controls, variac nozzle controls • 88 full load amps @ 220 volts, appx. 60 running amps • Solid state programmable controller • Solid state touchpad data access unit General • 3,100 lbs. net weight • 3-5 tons chilled water required, molds and machine • 3 CFM @ 100 PSI compressed air required Other Standard Equipment • Main line coalescent air filter • Manifold mounted air valves • Quick exhaust valve on blow line • Mold safety bottle jam protection • Screw safety timer • RPM indicator for screw speed • 16-station water manifold • Hopper magnet • Machine mounting pads • Fully guarded with electrical interlock for operator safety