Printing Width: 800 mm
Web Width: 820 mm
Printing Repeat (Max): 600 mm
Printing Repeat (Min): 250 mm
Plate-Cylinder Gear-Pitch Module: 5 mm
Plate-Thickness, Sticky Back Included: 1.64 mm
Machine with quick change of anilox and sleeves into the press
Àppropriate for short and medium runs: preparation speed is 10 m / min and maximum print speed is 150 m / min.
A wide range of used materials (PP, PE, PVC, PET,BOPP, OPS films, etc., other papers and cardboard from 12 to 200 microns), it is possible to use stretching materials (stretch films from 12 microns) due to tunnel drying of a half-open type.
Hybrid (modified) 8th section for printing with both solvent based inks and water-based heat-activated adhesive.
Is geared but with quick change.
Min. Material tension: 2 Kg.
Max. Material tension: 15 Kg.
Solvent base inks
Anilox cylinder Diameter: 100 mm.
Simple unwinder and rewinder, max diam reel : 1000 mm.
Air shafts diameter: 76 mm.
Dryer Heater Power: 28 KW x 2 Electrical Heaters
Video System (visualization only)
Corona treatment Cason
Web guide before and after printing unit
Guarantee: Without guarantee
Current condition: In Production