EREMA 1512 TVE PLUS
EREMA INTAREMA® 1309 TVEplus
EREMA RM 70 TVE
PLASMAC Omega 105HCV
NGR 65 VDH
C.M.G S 40-70-TS
GAMAN PLAST MAS 600/50/P630
TAIAN HK35
Ref.: 300041822
Brand: MACCHI
Year: 2011
Other Specifications:
RECOTRIM - IN LINE SYSTEM FOR SIDE TRIM RECOVERY
This patented system consists of a specially executed extruder, screw Ø 80 mm with a short compressing screw and a longer plastification screw feeding the die head and rotary blade, air cooled pelletizer.
Production capacity: 10/50 kg/h. Actual production capacity can be greater or lower, in function of the regenerated materials, and limited by the granule cooling
Processable Materials, Monolayer or Coextruded:
HDPE/MDPE
LDPE
LLDPE
METALLOCENE
Trims characteristics:
· Width: max. 50/150 mm.
· Thickness: 10/200 my for LDPE - 10/80 my for HDPE
· Max. Trims arrival speed: 120/130 m/min.
·The above general parameters may be different, their processing is anyway limited by the output capacity of the system.
· Extruder Heating by Ceramic heating band.
· Extrusion cooling: by air.
· Granules cooling: by cooled air with spiral circuit vortex.
·Granules maximum transport distance: 15 meters.
· Electrical panel with Siemens PLC touch screen monitor for the control and synchronization of the extrusion and pelletizing functions.
· Cooling water: only required to feed the heat exchanger.
· Compressed air: not required.
·The system is mechanically executed up by two elements on wheels.