Clamping Force: 200 ton
Shot Weight (Max): 149 g
Distance Between Tie-Bars (H): 505 mm
Distance Between Tie-Bars (V): 505 mm
Platen Size (H): 720 mm
Platen Size (V): 720 mm
Screw Diameter: 35 mm
Mould Thickness (Max): 550 mm
Mould Thickness (Min): 180 mm
Daylight Between Platens (Max): 1015 mm
Opening Stroke (Max): 465 mm
Ejector Force: 4.99660944359185 ton
Ejector Stroke: 150 mm
Screw L/D Ratio: 24
Screw Speed: 300 rpm
Injection Pressure: 1730 bar
Injection Rate: 349 cm³/s
Nozzle Force (Max): 5.60843917137861 ton
Nozzle Stroke (Max): 375 mm
Heating Zones: 5
Oil Tank Capacity: 840 l
Fully closed material cylinder.
Two emergency stop buttons on the operator's side and at the rear of the molding machine.
High Speed Proportional Mould Opening/Closing Valve.
Valve on the plate to determine mold thickness.
Enlarged oil cooler.
Non-contact motion sensor on magnetic cushion.
Main voltage device one set.
Plasticity rate 22 g/s (PS).
Screw with improved blending.
Injection unit with servo-motor for precise control of nozzle injection weight R35.
Ejectors triggering during mold opening (2nd servo motor).
4 air valves - 2 on a fixed plate and 2 on a movable plate.
2 outlets for pneumatic valve control (4DO in KEBA).
1 output for the colour dispenser.
Ejector protection connector - for communication with the mold.
Additional 2x230 V and 2x380 power connectors at the front of the molding machine (operator side) and 3x230 V and 3x380 at the rear of the molding machine.
Decrease in the height of the outlet window to 350 mm at the back of the molding machine.
Guarantee: Without guarantee
Current condition: In Production