Thermoformer GN, You can contact our team and analyze your needs so we can offer you the best possible solution depending on your budget.
Ref.: 300042024
Year: 2005
Brand: GN
Delivery time: Immediate
This machine is designed to produce termoforming moulded products with a pre-punch streching of material. Moulding and cutting of finished products is performed in one unit, which ensures accuracy and repeatability of products throughout the entire production process. After molding and felling, the molding unit rotates and pushes the finished products onto a receiving stacker.
Forming depth (negative / positive): 120 mm - 25 mm
Material width maximum: 350 mm
Maximum roll diameter: 1000 mm
Roll maximum weight: 250 kg
Dry cycles max. : 35 1/min
Maximum air consumption: 1.25 m3/min
Operating air pressure: 7 kg/cm2
Water consumption: 780 l/hour
Heat quantity to be dissipated: 0.75 KW
Average power consumption: 7 KWh
Air consumption: 1.25 m3/min
Plug-Assist
The machine is supplied with a 98.5 mm diameter mould for the production of polystyrene caps for D=95 mm PS glasses. The form is 3-place with V - shaped arrangement of cells. Also included in the set is a stacking tool for finished products.
7000 working hours.
The machine has been working for only one year.
Guarantee: Without guarantee
Current condition: Not running. Can be shown in dry cycle
Availability: Immediate
Voltage: 440 V Triphase
Frequency: 50 Hz
, Frequency: 60 Hz
Voltage: 45 Kw
W.M. WRAPPING MACHINERY SA FC 780 E IM/2 SPEEDMASTER PLUS
Thermoformer