Machine Vendue

Soudeuse Sacs stand-up (Doypack): NISHIBE SBM 600 ST 4L DS de 2012 d'occasion


Recherche de machines d'occasion

Produits similaires:

Soudeuse Sacs stand-up (Doypack) - NISHIBE - SBM 600 ST 4L DS

Fiche technique: NISHIBE SBM 600 ST 4L DS d'occasion

Ref.: 300043139

Marque: NISHIBE

Année: 2012

D'autres caractéristiques:

For standup pouches, sealed edge pouches and 5 joint pouches

4 lines (= 4L) double step (= DS) pouch production line for :
Sealed edge pouches out of different laminates for the
sterile sector.
Sealed edge and standup pouches.
5 joint pouches.
3 edge pouches (e.g. 100 g pet food, 95 mm wide).
So far main production was standup pouches for pet food.
Maximum productivity with smaller formats and high quantity.
Similar design like TOTANI, as well from Japanese manufacturer.
Max. performance 4 pouches per step (= 4 lines, 4L) and double step
(= DS), thus max. production upto 8 pouches per step (= per stroke) !

FUNCTIONS AND MACHINE COMPONENTS
Pouch production:
From main unwinder the web is always splitted in 2 parts.
Both halfs are separately guided until the meet again before the main longitudinal sealing station.
Double advance possible.
One upto four 1-up production possible.
Production of upto 8 pouches per step possible (so far this way produced for pet food pouches).

Main unwinder:
Horizontal.
Reel width 400 to 1 220 mm.
Reel diameter 800 mm.
Shaft with 6 inch core stopper.

Vacuum table for gluing

Bottom:
3 unwinders for bottom material. Reel diameter 800 mm, width 400 mm.
Per step it’s possible to produce 1, 2, 3 or 4 or 4, 6 or 8 standup pouches.

Side fold: From above 3 unwinders comes the material for the side fold for the production of 5 seal pouches. These
pouches can be produced in 1 or 2 steps.
Photo cell control
Web edge control: the lateral web run tolerance is +/- 1 mm.
Inline corner punch device: radius 5 mm.
Cooling station: for longitudinal and cross seals.
Notch punch: 8 notch punches, each with 1 notch tool 2 x 4 mm.
Seal joints: upto cutting length 500 mm both sides of the pouch will be sealed with one step.
2 blade cutting tools:Each with 3 blades.
Edge trim winders

Welding tools:
Widths 16 mm and 12 mm.
Top and bottom heated.
With heat pipes.
Temperature control is integrated in microprocessor control.

Counter: quantity counter is integrated in microprocessor control.

Stacker:
Brand HAMA.
Staples the bundles at high output.
Enables at many orders the packing of the pouches into boxes just by 1 person, instead of 2 persons without stacker.

Produceable material widths and reel diameters
Unwinder /Sealed edge pouches (mm) / Standup pouches (mm) / Bottom (mm) / Side fold (mm)
Reel Ø 800 / 800 / 800 /800
Core Ø 76 / 152 ; 76 / 152 ; 76 / 152 ; 76 / 152
Reel width min. 400 / 400 / 50 /50
Reel width max. 1 220 / 1 220 / outside 200,inside 240 / outside 200 , inside 240

Produceable 5 joint pouches (4 edge joints)
Longitudinal production, one 1-up or two 1-up‘s.
Description / One 1-up (mm) / Two 1-up‘s (mm)
Pouch width min. 200 / 100
Pouch width max. 600 / 290
Side fold width min. 40 /40
Side fold width max. 160 / 160

Cooling and sealing station
Description/ Quantity/ Length (mm)
Sealing station longitudinal / 3 / 820
Sealing station across / 8 /620
Cooling station longitudinal / 3 /820
Cooling station across / 2 / 620

Performance
Max. approx. 100 steps per Minute, depending on format and material.
Max. approx. 800 pouches per Minute, depending on format and material.
Max. 8 pouches per step, depending on format and material.

Dimensions Length: approx. 14,8 m Width: approx. 2,7 m (at unwinder) Height: approx. 1,9 m