Used Coextrusion lines: KOLSITE KET-33460 of 2012

Data Sheet of Used KOLSITE KET-33460

Ref.: 300043323

Brand: KOLSITE

Year: 2012

Other Specifications:

2100 mm layflat 3-layer IBC Blown Film Line. Kolsite. 25-200 micron, 1:2:1.
2 x 60 mm 30:1 Extruder, 55 kW AC drive. 4-zone 12.8 kW ceramic heaters & blowers.
1 x 75 mm 30:1 Extruder, 90 kW AC drive. 5-zone ceramic heaters & blowers.
Each extruder has a barrier screw,vacuum Hopper Loader, Melt pressure Transducer, Screen changer.
500mm Die Diameter with 2.2 mm lip Die. 40 kW heaters in 8-zones.
Air ring with orifices. 25 HP air blower driven by AC drive, differential Pressure Gauge & Heat exchanger.
IBC with 5-orifice and 3 x non-contact Ultrasonic Diameter Sensors, 1x auto thermal compensatory sensor, proportional diaphragm butterfly Valve.
2x air blowers for inlet & exhaust and heat exchangers, each with 20 HP AC drive.
800~1400 mm diameter motorized Bubble Cage with Teflon beads.
Motorized Collapsing Board with Teflon Bushes.
Take-off unit of 2200 mm water cooled Nip unit, 2 HP AC drive.
360 degrees Oscillating Haul-off with Turn bars with locking & air floating arrangement, 5 HP high pressure Air Blower.
Pneumo-hydraulic Center & Side-Trim slitting unit.
Web aligner
1000 mm diameter fully auto 2-stations auto splicing & roll change-over Surface Winder, each with 2 HP vector controlled AC drive, expanding shafts x 4 . Air shafts, Roll unloading.
Auto Web Tension control & Taper tension control with load cells.
Control Panel with 29 zones PID Temp. controllers and AC drives.
PLC control for Osc. Take-up & auto Winder.
2 sets Synchronized Master Drives viz., Plant master for all extruder drives + take-up Nip + Winder Nip + Winder Drum.
Line-speed Master for Take-up Nip, Winder Nip & Winder Drum.
Max 120 m/min.