Maszyny sprzedawane

Używana Linie do wylewania folii wielowarstwowej: SML CCS/120, 90, 75/3200/MDO3200/400 2014


Wyszukiwarka używanych maszyn

Podobne maszyny:

Linie do wylewania folii wielowarstwowej - SML - CCS/120, 90, 75/3200/MDO3200/400

Dane techniczne maszyny używanej SML CCS/120, 90, 75/3200/MDO3200/400

Ref.: 300043534

Marka: SML

Rok: 2014

Inne specyfikacje:

COEXTRUSION CASTFILM LINE 5 LAYERS FOR BREATHABLE FILM / MELT EMBOSSED FILM - CCS/120,90,75/3200/MDO3200/400

Film thickness range:
- breathable film 15 - 40 g/m²
- PE melt embossed film 12 - 30 g/m²

Output for breathable film: 17 g/m² x film width 2500 mm x 300 m/min= 765 kg/h
Output for Melt embossed film: 15 g/m² x film width 2500 mm x 300 m/min= 675 kg/h


1 DRY AIR UNIT for PE/PP + Calciumcarbonate granules

MATERIAL FEEDING AND DOSING by DOTECO

Extruder "A":
- 1 material feeding / main componant
- 5 material feeding / additional component
- 1 gravimetric batch dosing system for 6 components mounted directly on the extruder
SML single screw extruder Base frame / SML-ES-120/33
Drive: 205 kW / IP 55
Transmission
Resin feeding
Barrel: 33 L/D
Hydraulic screen changer SML-MF-hyd/120

Extruder "B":
- 1 material feeding / main componant
- 3 material feeding / additional component
- 1 gravimetric batch dosing system for 4 components mounted directly on the extruder
SML single screw extruder Base frame / SML-ES-90/33
Drive: 136 kW / IP 55
Transmission
Resin feeding
Barrel: 33 L/D
Screw
Hydraulic screen changer SML-MF-hyd/90

Extruder "C":
- 1 material feeding / main componant
- 3 material feeding / additional component
- 1 gravimetric batch dosing system for 4 components mounted directly on the extruder
SML single screw extruder Base frame / SML-ES-75/33
Drive: 90 kW / IP 55
Transmission
Resin feeding
Barrel: 33 L/D
Screw
Hydraulic screen changer SML-MF-hyd/75

FEEDBLOCK & FLAT DIE by CLOEREN
A 5- layer feedblock VG - H design variable geometry
A 5- layer Selectro Plug - H b
5 Set (2pcs.) of streamline manifold inserts
Automatic flat die with die lip width: 3250 mm
Die splitting system
Frame tool unit with max. capacity of 3000 kg

COOLING AND TAKE OFF UNIT
Chill roll unit SML-CS/400/3200embossing for melt embossed films
Cooling rollers:
- embossed casting roller (surface chromium plated)
:
Ø 800 mm
- cooling roller C2 hard chromium plated surface: Ø 400 mm
- rubber pressing roller with 2-layer silicone surface, pressure adjustable: Ø 700 mm
- 2 water cooled steel support rollers with pneumatic pressing unit: Ø 250 mm
- 4 cooling circuits with injector and motor valve
Nip Roll
Guiding Rollers
Decharging Bar
Positioning and downstream drives
Edge cooling device for melt embossed film

THICKNESS MEASURING UNIT for automatic die

consisting of beta source kr85 and sensor, operating panel, screen, software and base frame with guide rollers

MONOAXIAL STRETCHING UNIT
Primary edge trim - Cutting in front of MDO unit: 3200 mm
Stretching Unit 3200 with frame and adjusting elements, connection support and web guide
- max. mechanical speed: 400 m/min
- max. stretching ration mechanical: 1 : 10
Preheating Unit I
Stretching Unit I
*Annealing Unit
Sretching Unit II (same specs)
Stabilizing & Cooling Unit

THICKNESS MEASURING UNIT second frame for MDO consisting of beta source Kr85 ad sensor, software and base frame with guide rollers

EDGE TRIM AND REMOVAL
1 Edge trim - Injector system for stretching line for endless edge trims processing in recycling line
- max. horizontal: 25 m
- max vertical: 4 m
2 Antistatic pipe, lenght: 1000 mm
active lenght: 500 mm
Power supply unit for antistatic pipes
Air separator
Recycling plant for inline recycling of edge trims:
- output for breathable film: min. 120 / max. 240 kg/h
- output for melt embossed film: min. 100 / max. 190 kg/h
- single screw venting extruder: Ø 70 mm

WINDING UNIT SERIES / 2000
1 Cast film Winder W2000/Aerofilm/2700/6",3"/400:
- max. width: 2600 mm
- width of rollers in cutter stand: 2900 mm
- width of contact roller: 2700 mm
- max. mechanical winding diam: 1000 mm
- max mechanical line speed 6" winding shafts: 400 m/min

Cast Film Winder Series 2000 AERO FILM suitable for 3" and 6", consisting of:
- Cutter Stand, Main frame, Cross cutting, Web transfer to new shaft, Winding Shafts, Shaft handling system, touch-screen, PLC and Software

Oscilation unit for Winder 2000
Speed upgrade 3" winding shaft for winder 2000 AERO FILM available up to winder W2000/Aerofilm/2700/3", 6"/400

AUTOMATIC CONTROL SYSTEM by SMILE SML-C-S-2
Corona Treatment system by AFS four doubled side treatment: 2700 mm
Integration of film inspection system
2 additional guide rollers with frame