Použitý Stroj HUDSON-SHARP 5106/620LH 2017 na prodej

Stroj na výrobu pytlů na sáčky na dětské plenky HUDSON-SHARP


Záznamový List Použitý Stroj HUDSON-SHARP 5106/620LH

Ref. : 300043732

Rok: 2017

Značka: HUDSON-SHARP

postavení: Na prodej

Dodací lhůta: Bezprostřední



Technické Specifikace :

svařovací Šířka: 1015 mm

Taška Délka (max): 1015 mm

Taška Délka (Min): 240 mm

Bag Width (Max): 620 mm

Taška Šířka (Min): 150 mm

Tloušťka filmu (Max): 0.12 mm

Tloušťka filmu (Min): 0.018 mm

Gusseting Hloubka: 150 mm

Cyklů za minutu: 350 U/min

Rychlost filmu: 120 m/min

Řídit:Servo

odvíječ Type:Single

Mother Reel Width: 1770 mm

Mother Reel Diameter (Max): 1000 mm

Edge Guide:Yes

Folding Unit:V-Folder

Handle Punching Unit:Yes

Ostatní Specifikace:

MODEL 5106 W SERVO DRIVEN WICKET BAG MAKING MACHINE
MAX. DRAW LENGTH 620MM, LEFT HAND CONFIGURATION

A/ Machine Capabilities
Draw length (bag width) : 150 - 620mm
Seal width (bag height) : 240 – 1015mm* (without attachments) // 240 – 915mm* (with servo attachments)
* Maximum bag length can only be achieved by adding a third wicket arm and drape bar and can be limited by the width of the unwind.

Actual speeds depend on material quality, gauge and seal ability, bag dimensions and style, operator experience, etc…
Seal strength will reduce at treatment levels of 38dynes/cm and above.

Mechanical cycle speed:350 cpm

Bag styles:
·Simple diaper bag without handle
·Paramount style diaper bags with longitudinal seal inside the gusset, sealed handle on the top
·Paramount style diaper bags with longitudinal seal outside the gusset, sealed handle on the top
·Diaper bags with a folded strip foreseen of slits
·Diaper bags with a single strip

Material:
Basic bag film : 18-120µ

B/ Surface Driven Single Roll “Shaftless” Reel Lift Unwind Stand 1.770mm
max. roll width : 1.770mm
min. roll width : 400mm
max. reel dia. : 1.000mm
max. weight : 1.000kg
max. speed : 120m/min

C/ Folding Triangle 2.000mm

D/ Tip Gusset Former
min. gusset depth : 20mm
max. gusset depth: 150mm
5 Dimensions included (20mm, 60mm, 100mm, 120mm and 150mm)

E/ Continuous ball & die punch
Throat depth: Max 60mm

F/ Trimmer
Min. trim width: 10mm
Max. trim width: 25mm

G/ Auto Correction System (Patented)
Automatic positioning of all attachments (photo eye, wicket punch, pre-sealer, dual static loader, etc…) to accommodate print repeat variations

G.2. Seal Bar Cleaner

H/ Attachments
H.1. Two level Static Loader
H.2. Moveable Mid-feed anti-bounce rolls
H.3. Servo Driven Wicket Punch 600mm
H.4. Servo Driven Pre Sealer 200mm
H.5. Conversion Kit For Pre Sealer into a “Chevron” Sealer

I/ Automatic "ONE STEP" Wicket Stacker With 1 Stacking And 8 Unloading Positions 620mm

J/ EQUIPMENT TO PRODUCE “PARAMOUNT” STYLE BAGS SEALED INSIDE OR OUTSIDE
J.1. Add-on Film Unwind And Inserter For “Paramount” Handle Film (350mm)
1. For rolls of max. 350mm wide, max. Ø700mm
2. Electric shaft driven and braked
3. Turret unwind with an expandable shaft for Ø76 (±2)mm ID cores, max. deflated dia. of the shafts 74mm
4. End of reel and film break detection
5. Edge guiding with one ultrasonic sensor
6. Slitter to split the handle film into 2 handle films
7. Lane movers to position the 2 handle films with manual position adjustment
8. Static loader to fix the handle films to the main film

J.2. Contact Longitudinal Sealer 2.000mm
1. Two seal units
2. Seal unit consists of 2 top-bottom sealing blocks and 1 top-bottom cooling block (water cooled, to be supplied by customer); 1500 Watt per seal head
3. Independent temperature control
4. Cross adjustment of the seal heads by spindle
5. Teflon band driven by main film
6. Automatic lift-off of the seal head at machine stop
7. Heat failure alarm
8. Max. film width : 2.000mm
9. Min. film gauge : 30µ
10. Seal width : +- 2mm

J.3. Additional Tension Control Unit 2.000mm

J.4.Overstep Platform 2.000mm

J.5. Vertical Gusset former And Unfolder For “Paramount” Handle Film Sealed on the Outside of the Gusset
min. gusset depth : 40mm
max. gusset depth: 100mm

J.6. Unfolder For “Paramount” Handle Film Sealed on the Inside of the Gusset

J.7. Contact Longitudinal Sealer 1.000mm
1. One seal units
2. Seal unit consists of 2 top-bottom sealing blocks and 1 top-bottom cooling block (water cooled, to be supplied by customer); 1500 Watt per seal head
3. Independent temperature control
4. Cross adjustment of the seal heads by spindle
5. Teflon band driven by main film
6. Automatic lift-off of the seal head at machine stop
7. Heat failure alarm
8. Max. film width : 1.000mm
9. Min. film gauge : 30µ
10. Seal width : +- 2mm

J.8. Servo Driven Handle Cut Out Clean Cut (in longitudinal direction)

J.9. Servo Driven Shoulder Cut Out
1. Min. cut-out 140mm
2. Max. cut-out : 400mm
3. Radius : 45mm
4. Servo driven, max. cycle speed 125CPM
5. Flying knife

J.10. “Double” Easy Dispensing Perforation
1. Pneumatic driven
2. Equipped with two perforation pattern, length 250mm:
-2 knives straight 1mm cut / 2mm land
-2 knives straight 2mm cut / 5mm land
3. Max. width 100mm
4. Double knife design
5. Film clamping during cutting
6. Position adjustable on the fly
7. Max. mechanical cycle speed: 240CPM
8. Automatic positioning in cross direction

K/ EQUIPMENT TO PRODUCE FOLDED AND FLAT STRAP HANDLE BAGS

K.1. Add-on Film Unwind For Inserted Tape (100mm)
1. For rolls of max. 100mm wide, max. Ø700mm
2. Electric shaft driven and braked
3. Turret unwind with an expandable shaft for Ø76 (±2)mm ID cores, max. deflated dia. of the shafts 74mm
4. End of reel and film break detection

K.2. Tape Preparation And Insert System For Folded and Flat Strap Handle

Ostatní Detaily:

Zaručit:

Provozuschopnosti:

Dostupnost: Bezprostřední

Voltage: 380 V Triphase
Frequency: 50 Hz

Podobné stroje:

*Name:
*Telephone:
*Název společnosti:
*Email Adress:
*Města:
*Země:
*Comments:

Kontaktujte Nás

Head Office - Europe
Parque Tecnológico de Boecillo
Calle Andrés Laguna 9-11
E - 47151 Valladolid
Spain
+34 983 549 900
info@machinepoint.com
Podívejte se na naše další Kanceláře »

Kontaktujte Nás