Used Label flexo printing machines: GALLUS KMS 510 of 2005

Data Sheet of Used GALLUS KMS 510

Ref.: 300043832

Brand: GALLUS

Year: 2005

Other Specifications:

Gallus KM 510 S & FSM 510 9-color press with forced air/heat dryers in each station and 8 uv dryers.

Gallus KM 510 S
Substrates:
Paperboard Up to ca. 450 g/m2 (gsm) with max. 0.6 mm (0.024”) thickness

Machine Data:
Web width, max. 516 mm (20 5/16”)
Web width, min. 254 mm (10”)
Roll diameter, max. 1’520 mm (60”)
Printing & processing width, max. 510 mm (20”)

Printing:
Repeat length flexo and screen printing, max. 660.4 mm (26”)
Repeat length flexo and screen printing, min. 304.8 mm (12”)
Repeat length increment, flexo/screen printing 1/8” (3.175 mm)

Hot Foil Stamping:
Repeat length hot foil stamping, max. 660.4 mm (26”)
Repeat length hot foil stamping, min. 374.65 mm (14 3/4”)
Repeat length increment, hot foil stamping 1/4” (6.35 mm)

Rotary Processing:
Repeat length rotary processing, max. 609.6 mm (24”)
Repeat length rotary processing, min. 381 mm (15”)
Repeat length increment rotary processing 1/8” (3.175 mm)

Register Accuracy:
• print to print (98%)+/- 0.1 mm (0.004”)
• print to cut (rotary), (98%)+/- 0.15 mm (0.006”)

Electrical Requirements:
440 Volts / 3 Phase / 50-60 Hz / 500 Amps

Flat-bed Processing :
Repeat length, max.660.40 mm (26”)
Repeat length, min.304.8 mm (12”)
Repeat length increment continuous
Cutting load, max. approx. 80 t
Register Accuracy Print to Cut:
• 90% +/- 0.15 mm (0.006”)
• 97% +/- 0.25 mm (0.01”)
Machine Output:
at max repeat 200 strokes/min. (approx. 130 m/min)
at min repeat 300 strokes/min. (approx. 90 m/min)
Electrical Requirements:
440 Volts / 3 Phase / 50-60 Hz