Použitý Stroj ALPINE MDO 20 1999 na prodej

Monoaxiální orientovaná linka MDO ALPINE


Záznamový List Použitý Stroj ALPINE MDO 20

Ref. : 300043864

Rok: 1999

Značka: ALPINE

postavení: Na prodej

Dodací lhůta: Bezprostřední



Technické Specifikace :

Film Šířka (Max): 2000 mm

Parent Roll Průměr: 1000 mm

Final Roll Diameter: 1000 mm

Ostatní Specifikace:

General data and machine configuration
• Machine direction Left to right (from operator side)
• Machine speed 0 – 190 m/min
• Process speed 4.3 – 190 m/min
• Web width 1200 – 2000 mm in / 1000 – 1800 out
• Web position in the machine Centre
• Mechanical noise level, with all parts in operation. 90 dB (A) max. at 190 m/min
Web handling
• Web tension range film Minimum 20 N Maximum 200 N
• Web tension variations film Montalvo ± 20 N
• Max lateral movement of webs During constant speed ± 5 mm During speed variations ± 10 mm
• Emergency stop Approx.2 sec
• Quick stop (web-break) Approx.2 sec only when breaking into mono orienter
• Quick stop Approx.5 sec
• Risk of material break during quick stop
• Normal ramp 0-5 m/min/s
• No material break during normal stop
• Threading speed 4.3 m/min
• Web distance to floor > 300 mm

Unwind system
Unwind system is including the lift arms, the pressure cylinder and the dancer roller. Lift arms
• Roll Diameter 1000 mm
• Web Width 2000 mm
• Roll Weight Max 1500 Kg
• Brakes Lenze Servo Motor
• Chucks Pneumatic Expansion
• Mono-directional winding Pressure cylinder
• Type EPDM 65 Shore A
• Roll Diameter 140 mm
• Roll Width 2200 mm Dancer roller
• Roll Diameter 120 mm
• Roll Width 2200 mm
• Tension controlled by geared potentiometer from Siko 0-10 V and an pneumatic jack
Orientation system
The orientation system is stretching the film from 36 m to 15 m. It consists on 2 pairs of nip rolls and 16 heating / cooling cylinders. Nip roll 1
• Manufactured by Hosokawa Alpine
• AC motor driven 11kW from Control Techniques
• Nip roller Cover rubber Rubber length 2100 mm Diameter 300 mm
• Chrome coated roller Cover chrome Rubber length 2100 mm Diameter 300 mm
• Contact pressure made by pneumatic jacks MDO TECHNICAL SPECIFICATION

Nip roll 2
• Manufactured by Hosokawa Alpine
• AC motor driven 18.5kW from Control Techniques
• Nip roller Cover rubber Rubber length 2100 mm Diameter 300 mm
• Chrome coated roller Cover chrome Rubber length 2100 mm Diameter 300 mm
• Contact pressure made by pneumatic jacks
Heating / Cooling cylinders
• Manufactured by STS Breitstreckwalzen GmbH
• Idle roller
• Roll Diameter 78 mm
• Roll Width 2100 mm – 2340 mm total
• Hard chrome coated Ra = 1.6 m, Thickness 20 – 30 m.
• Up to 140°C
• Special coating Manufactured by Inometa GmbH Type Protek 8608 Cover Anti stick polymer Rubber length 2100 mm Roughness 20 to 40 m Rz Thickness 100 to 150 m
• Opening and closing made by pneumatic jacks
• Rotary union manufactured by Filton
• Designed for water Heating / Cooling units
• Manufactured by GWK
• 8 pieces
• Heating power 9 kW and 18 kW MDO TECHNICAL SPECIFICATION
• Direct cooling
• Temperature scale min. 10 °C max. 140 °C for heating units at 9 kW 150 °C for heating units at 18 kW Heat transfer unit
• Manufactured by SWEP
• Plates heat transfer 30 kW
Guiding rollers Mink cylinder
• Manufactured by Mink
• Type Brushed • Roll Diameter 105 mm
• Roll Width 2200 mm X-crossed cylinder
• Manufactured by Inometa
• Type X-crossed
• Roll Diameter 120 mm
• Roll Width 2200 mm Aluminium cylinder
• Type Aluminium
• Roll Diameter 120 mm
• Roll Width 2200 mm

Rewnding System
Winding system is including the lift arms, the pressure cylinder and the dancer roller. Lift arms
• Manufactured by Maier
• Roll Diameter 1000 mm
• Web Width 2000 mm MDO
• Roll Weight Max 1500 Kg
• Chucks Pneumatic Expansion
• Roll loading and unloading Fully Manual
• Core unloading Fully Manual
• Mono-directional winding Pressure cylinder
• Type EPDM 65 Shore A
• Roll Diameter 140 mm
• Roll Width 2200 mm Dancer roller
• Roll Diameter 120 mm
• Roll Width 2200 mm
• Tension controlled by geared potentiometer from Siko 0-10 V and and pneumatic jack

Ostatní Detaily:

Zaručit:

Provozuschopnosti:

Dostupnost: Bezprostřední

Podobné stroje:

*Name:
*Telephone:
*Název společnosti:
*Email Adress:
*Města:
*Země:
*Comments:

Kontaktujte Nás

Head Office - Europe
Parque Tecnológico de Boecillo
Calle Andrés Laguna 9-11
E - 47151 Valladolid
Spain
+34 983 549 900
info@machinepoint.com
Podívejte se na naše další Kanceláře »

Kontaktujte Nás