Used Digital printing machines: UTECO SAPPHIRE EVO 041 Mod. 60 of 2018

Data Sheet of Used UTECO SAPPHIRE EVO 041 Mod. 60

Ref.: 300043867

Brand: UTECO

Year: 2018

Other Specifications:

MATERIAL AND PRINTING WIDTH
Material width:min.: 325 mm max: 650 mm
Printing width:max 620 mm.

MACHINE SPEED
Mechanical speed: 300 m/min max
Printing speed:
min.:20 min (depending on the type of inking system, type of inks, type of solvents and model of the machine).
max.:
depends on all the following printing conditions:
-type of material;
-inks, lacquers and solvents;
-required print quality;

Web direction:from left to right (from operator's side) with outfeed nip roll group on the right side of the printing section.

MATERIALS TO BE PRINTED
Materials to be printed:Plastic films and paper within tension range specs.

TYPE OF INKS
Type of inks used :Water based inks on the ink jet section.
Exclusively ink, fluids or supplies supplied by Kodak or manufactured to Kodak's specifications with Kodak's prior written approval on the KODAK System section (the section will NOT be explosion- proof).


PNEUMATIC EXPANSIBLE SHAFT, I.D. 76 mm (3")
MOTORIZED CORONA TREATER (BEFORE THE PRIMER UNIT) Ferrarini & Benelli
EDGE GUIDE TYPE OPG – BST BRAND

KODAK PROSPER 24.5’’ LINE HEADS
Kodak Prosper 24.5” Writing System, containing 4 line heads each with 620 mm print width, each containing 6 Prosper Jetting Modules (JM) mechanically positioned, and stitched electronically. The standard Writing System will print process color (CMYK) wet on wet on substrates primed (inline or offline) with Kodak FOA primer.
The standard resolution is 600x900 dpi producing consistent round dots resulting in visual PQ similar to offset with 200 lpi.

IMAGING SYSTEM
Technology:Kodak Stream Inkjet Technology
Ink type:Kodak’s aqueous pigmented process color inks
Jetting Modules:4.16”, 48 Jetting Modules within a standard perfecting press Imaging width:Up to 24.45 (62.1 cm)
Variable repeat:Up to 54” (137.2 cm)
Consumables
Jetting modules:Kodak Prosper Press Jetting Modules
Inks:Kodak Prosper Press Pigment Cyan, Magenta, Yellow and Black Inks Other fluids:Kodak Prosper Press Storage Solution and Replenisher Fluid Ink supply:208-liter drums (55 gal.)

Each Line Head is supplied by one Fluid Station that resides in the rear of the press.

The Writing System includes a camera system (Kodak IQS) to enable electronic stitching at set up and maintaining stiching quality during operation. This system is not a 100% inspection system. The only function of IQS system

KODAK FLUID STATION CONDITIONING
An air-cooled water thermoregulating unit controls the central impression drum temperature as well as cools the outfeed chill rolls and the hydraulic power unit (if included in this supply).
It is a closed-loop system with recirculating pump and heat exchanger, for a proper cooling capacity Electrical heating unit for water pre-heating.
Cooling unit included.

OUTFEED UNIT
OUT-FEED CHILL DRUM
CHROME COATED DRUM

TYPE OF DRYING SYSTEM Hot air gas burner.
THERMOREGULATION FOR GAS BURNER

VISUALIZATION
100% inspection system type VLAB100_4K N.1
100% inspection control of the converting industry for paper, aluminum, and flexible materials (PE, BOPP, OPP, LDPE).
VLAB100_4K comes as a versatile and easy to use, allows control of 100% of production for any type of printing.

1 (ONE) FLEXO STACK UNIT TYPE “ONYX XS” (FOR WATER BASED INKS VARNISH APPLICATION)

EDGE GUIDE KAMBEROLLER
Edge guide Kamberoller, electromechanical type, with single ultrasonic sensor, manually adjustable, to guide the edge of the web (supplier at Uteco's choice).
NOTE: The sensor is installed on the operator's side. Any modification to be communicated to Uteco within 30 days from the order confirmation.

ELECTRIC SHAFT

POSITIONING OF THE PRINT STACK UNIT
ELECTRONICALLY CONTROLLED, MOTORIZED DECK-IN (RACK-IN)

LONGITUDINAL REGISTER
The longitudinal register is motorized. Register movement commands are located on a remote control panel. The register adjustment is effected by means of the motor of the printing cylinder.
Correction range: 360°

SIDE REGISTER
The side register is motorized operating directly on the union supporting the air mandrel. Max. correction range: ± 10 mm.
Side register movement commands are located on the same remote control panel (pendant) as the longitudinal register.

INKING AND WASHING MODULE FOR WATER-BASED INKS - FREQUENCY CONTROLLED
Each color station is equipped with its own washing module

INDEPENDENT REWINDER BR-1 1000 (SINGLE SHAFT)

Independent structure of cast-iron frames, 50 mm. thickness. Maximum diameter of the reel: 1000 mm (40").
PNEUMATIC EXPANSIBLE SHAFT, I.D. 76 mm (3")