Machine Sold

Used Rotogravure printing machines: WINDMÖLLER & HÖLSCHER Heliostar of 2006


Search used machines

Similar Products:

Rotogravure printing machines - WINDMÖLLER & HÖLSCHER - Heliostar

Data Sheet of Used WINDMÖLLER & HÖLSCHER Heliostar

Ref.: 300044380

Brand: WINDMÖLLER & HÖLSCHER

Year: 2006

Other Specifications:

Gravure cylinder width: 1280 mm
Roll diam. 800 mm
Roll weight max. 785 kg
Web tension range for Unwind, Draws and Rewind : 25-420 N (45-420 for Rewind with slitter)

SUBSTRATES:
OPA: 12 to 70 micron
BOPP: 10 to 30 micron
PET: 10 to 30 micron
Paper: 30-120 g/m2
Laminates: max 150 micron
LDPE (suitable for gravure printing): 10 to 120 micron

INKS: NC, PVB, PVC, 1- and 2- components

STANDARD SOLVENTS:
Alcohols up to 100%
Ester up to 100%
Gylcol ether up to 70%
Ketones up to 35%


DRYING SYSTEM:
10-Noozle dryer:
- supply air flow rate: 4760 m3/h
- dryer length: 1800 mm
- Nozzle exit air velocity: 46 m/s
- Exhaust air flow rate with solvent based inks: 4320 m3/h
- Nozzle min. exit air temperature: 30ºC / Max. 120ºC
- Heating capacity with solvent based inks: 120 kW

2x 10-Noozle dryer:
supply air flow rate: 9520 m3/h
- dryer length: 2 x 1800 mm
- Nozzle exit air velocity: 46 m/s
- Exhaust air flow rate with solvent based inks: 5040 m3/h
- Nozzle min. exit air temperature: 30ºC / Max. 120ºC
- Heating capacity with solvent based inks: 143 kW

Gas Pressure: 50-100 mbar

BASIC EQUIPMENT:

Non Stop flying splice turret unwind
2 air shafts for shafted winder for 76 mm core ID
Infeed draw
Corona treater
Web Guide prior to printing
2 gravure print stations for double hood dryer
6 gravure print stations for single hood dryer
8 impression roller system for use with sleeves
8 infeed roller adjustments for aligning the web
8 chill rolls
8 doctor blade units
8 print station direct drives
8 catwalk segments
8 inking systems
hot air dryers
hot air generator with solvent level control for direct heating of the drying air using natural gas as the heating source
central exhaust fan
solvent level analysers
8 antistatic bars - 2 discharge electrodes per print station
Viscosity controller
Solvent supply
Longitudinal and side register control
Pre-register adjustments
outfeed draw
cooling water piping
web inspection camera
electrical equipment, incorporated in the ELTAINER
Procontrol operator terminal
Module "job processing"
Pair of antistatic bars, on the rewind
Web guide prior to rewind
Slitter assembly, prior to the rewind
Non-stop flying splice turret rewind
2 air shafts for shafted winder for 76 mm core ID
8 spare slide-in carts for Heliostar GH
8 spare doctor blade holders
turning bar
ESA system
100% defect detection system