Used Bottom weld flat bag making machine: ARVOR Easy 850 of 2020

Data Sheet of Used ARVOR Easy 850

Ref.: 300044412

Brand: ARVOR

Year: 2020

Other Specifications:

Automatic welding machine designed for the production of bottom welded bags in LDPE, HDPE and LLDPE.
The machine can work with LDPE and 100% recycled LDPE.

Min-max thickness : 2x12 microns - 2x200 microns
Min-max speed per cycle : 10-110/min
Max production speed : 75m/min
Power consumption : 4 Kw
Compressed air capacity : 35 m3/h
Pressure : 6 bars

Characteristics:
Aluminum side structure.
Servomotor controlling the film advance of the Ø 80 mm front rollers.
Ø 80 mm rubber front rollers equipped with helical gears.
Touch screen to program or control the following operations:
Bag length adjustment.
Bag staggering function to prevent bags from sticking, suitable in particular for printed bags. The staggering value is programmable on the display up to a maximum measurement of 12 mm.
Repeat welding (to weld 2 times the same bag) with possibility to delay the film in order to obtain a stronger weld and to have two welds on the bottom of the bag, movement from 0 to 5 mm.
Adjustable system of automatic variation of the delay of the welding time during the working cycle in order to obtain a longer welding time.
Preheating function of the heating elements before the first bag is produced.
Full control of electronic cams location through PLC with touch screen access and password.
Photocell configuration: adjustment of the printed film positions by means of the photocell.
Missed or out-of-position prints alarm that can be activated in case a predetermined and repeated number of prints is not performed correctly.
Possibility to adjust the accumulation table for the evacuation of bag stacks with or without cycle interruption.
Machine speed control through an AC motor with soft start that allows a correct start of the transmission.
Partial and hourly totalizer counter of bags and production hours.
50 user programs.
Variable control of the sealing bars.
Rear feeding calender consisting of a rubber roller, pressure rollers, 1.5 KW AC motor and inverter. Accumulator compensator with counterweight.
Device for eliminating static electricity from the welding bars.
Two welding bars.
Electric panel with programmable PLC.
Cutting system consisting of a continuously operating blade that provides a uniform cut in most thicknesses and types of film.
Pneumatic system with reservoir to constantly supply air to facilitate the exit of the bags on air cushion.
Emergency buttons for immediate machine stop by brake to ensure operator safety.
Automatic machine stop device with open welding bars when the normal stop buttons are pressed.
Anti-jam device for the protection of the welding head and cutting system.
Safety protections.
Automatic disconnection in case of end of reel.

Equipped with:
CPE - photocell for printed film with simple installation and programming on touch screen.
TE 1.3 - Accumulation table, length 1,30 mt, with timers to control the table movement rate (rate with or without interruption).
Reel holder consisting of 2 bars of 25 mm diameter, 4 cones, braking system with 2 belts and 4 weights.

Reason for sale : The company will be dedicated to Research and Development, the machine will not be needed
Working hours : 3244