Used Bottom weld bags on the roll: COEMTER TER WIND 84120/450 ROLL of 2007

Data Sheet of Used COEMTER TER WIND 84120/450 ROLL

Ref.: 300044770

Brand: COEMTER

Year: 2007

Other Specifications:

The T-Wind is a machine for continuous production of bags on rolls, bottom or triple welded.

The machine is composed of the following modules:
PRE-CUTTING SYSTEM by rotating knife with double adjustment system, with machine stopped and with machine running.

Continuous WELDING BODY with constant heat sealing system at low temperature.
Two floating main welders with lateral expansion and electrode welding with continuous tensioning system.
System of interchangeable soft silicone pads, driven by chain with pneumatic tensioner and guided peripherally on the drum to avoid stretching of the chains, which are also guided along their entire length.
Adjustable film input and output tension on the drum.
Tension-free loop, at the drum exit, for weld cooling with height control.
Manual mechanical register (to register pre-cutting with welding).
Drive by AC motor and frequency inverter.

Motorized DOUBLE TRIANGLE FOLDER, with AC motor, frequency inverter and compensator for rewinder speed control.

WELDING BODY
Maximum speed 120 m/min
Maximum number of bags per minute 170
Bag length (drum development)
With two welders From 500 to 865 mm (10 by 10 mm)
With one welder From 1000 to 1730mm (10 by 10mm)
Web width : Up to 1200mm.
Type of material to be welded LD-PE. LLD-PE. HD-PE.
Maximum thickness to be welded 260 microns (total)

REWINDING MACHINE WITH LABELLING UNIT
Max. number of rolls/min. 20
Max. roll width 420 mm.