Machine Sold

Used Extrusion lines for coating: FONG KEE IRON WORKS LAFM-100-1400 of 2010


Search used machines

Similar Products:

Extrusion lines for coating - FONG KEE IRON WORKS - LAFM-100-1400

Data Sheet of Used FONG KEE IRON WORKS LAFM-100-1400

Ref.: 300044793

Brand: FONG KEE IRON WORKS

Year: 2010

Other Specifications:

1. Line Specifications
Resin to be use - PP, LDPE, EVA, and EAA, INOMER
Substrate - OPP, Paper, Alum Foil, and CPP
Lamination thickness - 0.012 — 0.060 mm (PP), 0.015— 0.060 mm (PE)
Machine line speed - 180 M/MIN.

2. Extruder
Type - LA10E3832
Main gear box - ZGB200E-B0-8,Zambello, RPU2/200E-B0
Screw diameter - 100 mm
Screw material - SCM440
Screw L/D ratio - 32
Barrel material - SACM1
Barrel heating method - Ceramic heater
Heating capacity - Barrel - 1 - 13.5 kw / Barrel -2 - 13.5 kw / Barrel - 3 - 13.5 kw / Barrel - 4 - 13.5 kw / Barrel - 5 - 13.5 kw
Barrel heating zone - 5 zones, temperature controlled by automatic temperature controller.
Barrel cooling - 5 zones, with motor of 1/2 HP centrifugal Blower
Screw driving motor - 100 HP A.C. motor
Stand moving motor - 2 HP x 4P brake motor
Hopper block - Water cooling type
Auto-loader - MALF-202 x 1 set
Hopper Dryer - THD-400E x 1 set
Extruder output - 250 - 280 kg/hr (PP,MAX.) , 280 - 320 kg/hr (PE,MAX.)
Melt pressure gage - 1290 (DYNISCO) x 1 set ,TPT463E-10M (DYNISCO) x 1 set
Melt temperature gage- RI-501-E (SHINKO) x 1 set

3. Cross head
Heating method - Stainless band heater
Heating capacity - Adapter 1 8.7 kw / Adapter 2 7.4 kw
Heater zone - 2 zone, temperature controlled by Automatic temperature controller

4. T-Die
Type - LA10D0216
Materiel - P-20 special steel
Die width - 1600 mm
Heater capacity - Die 1 2.3 kw / Die 2 2.3 kw / Die 3 2.3 kw / Die 4 2.3 kw / Die 5 2.3 kw / Die 6 2.3 kw / Die 7 2.3 kw / Die tip 3.4 kw x 2
Heating zone - 7 zone, temperature controlled by automatic temperature controller

5. Unwinder unit
Type - Automatic operation type ; 2 drums turret type with pre-run,auto splicing and cutting system
Substrate diameter - 800 mm (Max.)
Substrate width - 1200 mm (Max.)
Unwinding core - 76 mm I.D / 90 mm O.D. ;150 mm I.D / 180 mm O.D.
Turret motor - 2 HP x 4P brake motor with worm reducer
Tension control - Automatic tension control by load cell & powder brake ZKB-10x2 x 2 sets
Edge control - By automatic edge position controller (EPC)
Splicing device - Auto splicing by pneumatic operated pinch roller
Pre-run motor - 2 HP AC inverter motor x 1 set
Air shaft - 3” air shaft x 2 sets , 6” air shaft x 2 sets

6. Anchor coated unit
TYPE- LA90A0714 ,Holo type
Couture roller - 210 mm x 1400 mm
Rubber roller - 150 mm x 1400 mm
Driving motor - 5 HP AC inverter motor
Air blower (IN) - 5 HP x 1 set
Air blower (OUT) - 7.5 HP x 1 set
Heater capacity - 48 KW x 2 sets
Tension control - Automatic tension control by dancer roller feed back to drive motor

7. Lamination unit
TYPE - LA10M0514 , Three roller system type
Chill roller - 600 mm x 1400 mm, hard chrome plating, Constructed strutted with a double shell arrangement and spiral buffed
Pressure roller - 260 mm x 1400 mm, with surface silicon , rubber covered and water cooling system
Pressure roller - 250 mm x 1400 mm, with water cooling system
Roller pressure system - by pneumatic cylinders
Edge trimming -By score cutter
Trim removal - By 7.5 HP turbo blower x 1 set
Driving motor - 10 HP AC inverter motor
Line speed - 180 M/min. (MAX.)
Air compressor - 7.5 HP x 1 set — By custom
Chiller - 25 Tons x 1 set — By custom

8. Sandwich unwinder unit
Type - LA90S0814 2 spindles turret type
Substrate diameter - 500 mm (Max.)
Substrate width - 1200 mm (Max.)
Unwinding core - 76 mm I.D. 89 mm O.D.
Turret motor - 1 HP x 4P brake motor with worm reducer
Tension control - Manual tension control by powder brake ZKB-5x2 x 2 sets
Edge control- Manual operation
Splicing device - Manual operation
Air shaft- 3" air shaft x 2 sets

9. Winder unit
Type - LA90W0814 Automatic operation type 2 drums turret design.
Winding diameter - 800 mm (Max.)
Winding width - 1200 mm (Max.)
Winding core - 152 mm I.D. 180 - 190 mm O.D.
Turret motor- 2 HP x 4P brake motor with worm reducer
Aux. take off roller - 225 mm x 1400 mm