Used Single screw repelletizing line: EREMA INTAREMA 1714 TVE PLUS of 2015

Data Sheet of Used EREMA INTAREMA 1714 TVE PLUS

Ref.: 300045063

Brand: EREMA

Year: 2015

Other Specifications:

Processed Material:
HDPE: 900-1200kg/h
Origin of material: Prod. waste offline (producer)
Shape of material: shredded, Regrind, Pieces
Contamination: Foreign Plastics, Clean, Silicone
Moisture max: 8%
Use of melt/granulates: Virgin material offline

Polymer: PP 1200-1400kg/h
Material: Big bags, Filaments
Origin of material: Prod. waste offline (producer)
Shape of material: shredded, Edge Trim, Pieces

Belt Conveyor FB_10000_1200-SH
Double Layer All Metal Detector
Powder Doing Unit DBP_300_VOL: Volumetric, Up to 300kg/h (with max moisture of 2% CaC03)
Volumetric Masterbatch Doser DMB_120_VOL
3-120kg/h

Intarema Process Combination
The patented extruder system INTAREMA® TVEplus® sets new standards in the recycling of materials that are difficult to process such as heavily printed films and/or very moist materials. This is possible through ultrafine filtration, thorough melt homogenization and high-performance degassing in a single step
The patented large EREMA cutter/compactor is the decisive component in determining the performance of the EREMA systems and ensures optimum material preparation for the extruder.
The EREMA cutter/compactor-extruder combination has become the world's leading plastics recycling system.

Patented TVEplus@design-melt filtration takes place upstream of extruder degassing: melting with minimum shearing impact, enhanced filter performance, greater homogenization efficiency, efficient triple degassing

Including shock sensor, cutter compactor energy management, melt pressure indicator, melt temperature indicator and air/water heat exchanger for control cabinet
Liquid cooled bimetal extruder cylinder
Cutter/compactor 1700mm diameter, stainless steel
Extruder Screw: 140 diameter single screw 3S - technology
Cutter compactor motor: 315 kW
Extruder motor: 315 kW frequency controlled

Erema Air Flush Technology AFL_1300_1700
Max moisture: 8%

Trox Exhaust Unit TX_ZINC
Increase removal of vapor and volatiles from wet input materials in combination with Erema Air Flush and SAS technology
in zinc-coated execution

Automatic Input Slider INS_AUTOM_140-160

Powered Exhaust System SAS_2500
Moisture and dust reduction system

Water System for Vacuum Pump BWB_500_S

Erema Backflush Filter SW_8_170_RTF
Number of filter screens:8
Screeen diameter : 170
Active screen surface: 1814cm2

Set Die Face Pelletising Sytem SET_HGU_244D_2010_W7_1000_M15
Consisting of Hot Die Face Pelletizer HG_244D
Pellet Dewatering Screen GS_201_1000
Water Pump Station WPS_700
Pellet Drying Centrifuge GZ_1000_M15
New Direct drive unit integrated conveyor blower developed by Erema
Pellet Transport System PTS_I (1 Bend insulated, 1 Cyclone 122 I insulated, 1 Frame for cyclone)
Pellet Transport System PTS_8_I_FG up to 8m (FG transport blower, cyclone 133 I insulated, 1 Frame cyclone)

Powered Throughput Meter PDW_1500 (determination of throughput by means of weighting hooper)

Bag Fill Unit PBB_DINGLE_ST_PS700 (1 buffer silo 700l)