Used IST PN-S 2500 PLUS of 2018 for sale
Anilox, cylinders and plates washer IST, We will be by your side all along the process of buying your machinery, from the initial assessment, accompanying you in the visits, legal and technical consultancy, and defined contracts that will protect you.
Data Sheet of Used IST PN-S 2500 PLUS
Ref.: 300045172
Year: 2018
Brand: IST
Delivery time: Immediate
Ask for machine price Want to sell your machine?
Technical Specifications:
Other Specifications:
ATEX PNEUMATIC WASHING TANK
The machine cleans inkwells and all its solvent ink tools.
Internal measurements :
2400mm long x 650mm wide x 500mm high.
Service tank capacity : 200liters
Washing solvent level min : 120 Liters
Washing pump : 1"1/2
Air consumption Liters/min at 6 bar pressure : 2400
Washing pump capacity : 160l/min
Discharge pump : ½".
Operating pressure : 6 bar
Rinsing time : 10 seconds
Ambient working temperature : +5/+40
The PNEUMATIC WASHING TANK has been designed and manufactured for the washing, using solvent, of components/accessories that are part of machines/equipment that during their use get dirty with inks, paints, adhesives, resins, etc.
The washing is carried out by means of solvent jets on the components/accessories.
After opening the tank lid and positioning the components/accessories on the washing grid, the lid is closed and the washing cycle starts.
A pneumatic pump draws the solvent from a containment tank through filters and delivers it in a series of pipes with a pressure of approx. 3-4 bar.
These pipes carry the solvent to the washing nozzles positioned near the components/accessories to be washed.
The washing is carried out by means of:
The mechanical action of the liquid against the part (pressure created by the nozzles);
The action of dissolving the dirt generated by the solvent.
The dirty washing liquid returns to the containment tank through a discharge pipe.
At the end of the washing cycle, the rinsing cycle can be performed (rinsing option) where the pneumatic pump sucks the clean solvent from an external tank to perform the rinsing of the parts removing possible residues from the previous washing.
At the end of the washing and/or rinsing cycle, the suction of the gases generated during the washing-rinse can be carried out (suction option).
At the end of this phase, the operator can open the washing tank lid and remove the cleaned parts.
The time necessary to execute the washing cycle is determined by the quantity of components/accessories to be washed, how dirty they may be and the time during which they have been dirty.
Other Details:
Guarantee: Without guarantee
Current condition: In Production
Availability: Immediate
More information
