Used WINDMÖLLER & HÖLSCHER TRIUMPH 5A of 1992 for sale

Block bottom SOS bag making machine designed to manufacture 1 layer paper bags with flat handles Reel fed Servo system for the cutting length Min-max bag width: 105 – 320 mm Min-max carrier bags width: 180 – 320 mm Min-max cut off length: 240 – 650 mm Min cut off length for carrier bags: 270 mm Max cut off length for carrier bags including handle: 650 mm Min-max bottom width: 55-180 mm Min-max bottom width for carrier bags: 70 – 180 mm Roll width: 1070 mm Jumbo Roll Unwind: for rolls up to a diameter of 1.300 mm with motorized lateral adjustment Automatic precise and continuous web tension control over the entire diameter of the paper roll Servo motor – driven brake for the paper unwind with suspended dancer roller Hydraulic reel lift in 1 pneumatic unwind shaft, diameter 76 mm System for internally glued handles, for the in-line production of paper carrier bags with flat handles: Slitting unit to obtain broad bottom flaps Adhesive application nozzles for folded handle strips Nordson hotmelt application unit for the handles 2 unwind units for the paper handle strips, capable of pivoting to allow a spare roll to be loaded: roll diameter max 1.000 mm core diameter 70 or 76 mm 2 unwind units for the reinforcing patch material with edge guide control, FIFE, accommodated in a separate frame: roll diameter max 1.000 mm, core diameter 70 or 76 mm Assembly to perforate the web in the handle areas Gripper cylinders for application of the handle strips Draw unit for the outer web for adjustment of the web tension SERVO driven to synchronize the machine speed with the speed of the paper web. All cut-off length (incl. handle) of the bag machine can be processed. With 360 ° adjustment of the unit

Coextrusion line for the production of stretchfilm Typical output for stretch tube - 350kg/h (max. 450kg/h for non-stretch tube) 60/90/60mm diameter screws Die gap (mm): 1,2 and 2,0 and 2,8 Die diameter: 280mm Thickness Range (µm]: 40-150 Air ring with IBC Gusset (Max): 150 - 450mm Kundig thickness control system Gravimetric dosing unit: Nr of components: 6 (1+5)in the outer layer and 4(1+3) in the middle layer AFS Corona treatment (outside) Winder core diameter shafts 76,152mm Winding roll diameter (mm): max. 1200 Manzoni Stack printing unit with 6 (3+3) printing stations, 2005 year Max. printing width 1400 Additional equipment to be negotiated: Micro perforation  Electronic retrofit KIT from WH in value of 100K euros was purchased and can be acquire for lower price with the machine (e.g. to update electronics to latest version of Siemens)

Material used:PET / PET met. / OPP / OPP met. / PE-MDO / cellophane Material thicknesses used from 12microns Max. mechanical speed 400m/min Average production speed 250m/min Average production output 15,000m/h Turret unwinder and rewinders Max. core width 1,270mm Max. outer roll diameter unwinder 800mm Max. outer roll diameter rewinder 1,000mm Max. roll weight unwinder 1,000kg Inner core diameter unwinder 152 or 76mm Corona pre-treatment AFS BST Web guide units after unwinder and before rewinder Viscosity control 100 % camera FUTEC Control Unit The machine is offered with various anilox rollers, adapters, cooling unit but without printing sleeves. Anilox rollers length 1,346 mm diameter 159.15 mm Anilox dimensions: 80 / 100 / 120 / 160 / 260 / 340 / 360 / 420 / GTTS

Blown film extrusion plant for 3-layer FFS film Extruders 60/70/60.30 D PIOVAN MDW gravimetric dosing units with 6 stations each dosing unit divided 3 raw materials (large) and 3 additives (smaller) Type B 160 / 250 - 3 - P2 head with 180 mm die plate, 1.8 mm gap Modular cooler for inner and outer bubble air Calibrating device for working width from 200 to 800 mm double plate Automatic thickness control system Rotating haul off FILMATIC K automatic single reel winder Reel diameter: max. mm 1500 Modular automation optifil - plus -capacitive thickness measurement - width measurement and adjustment - gravimetric flow rate adjustment Film thickness (LDPE, LLDPE) mm 0.020-0.250 (HDPE) mm 0.008-0.100 Tower, printing press and embosser not included

Extruders 90/120/90 mm 30D Die head 450/630-3 with internal heating and thickness regulation system OPTIFIL P3 . Die plate 630 mm, die gap 1,25/2,25 mm Air Ring multicool Calibration basket Nostic Aircage Multinip rotating haul off, speed up to 200 mt/min 3 gravimetric dosing units 1+5 elements Heat exchangers Web guide Thickness and width control system Double automatic rewider Filmatic, diam max reel 1200 mm for shafts 3¨& 6¨. Available 6x152 mm Film width 1485-2600 mm Materials LDPE, LLDPEμm 20 – 250 HDPEμm 8 – 100 Tower not included Availability July/August 2025