Used LEMO RO 1100.2 3 of 2004 for sale

The machine can process HD-PE, LD-PE, LLD-PE, PP. The film thickness can vary between 2x 20 and 60 µm (LD-PE). The machine can produce bags with a width of 70 to 400 mm and a length of 155 to 560 mm incl. flap (40-60 mm), as well as a bottom gusset of 27-60 mm. Unwinder 1350 with automatic web edge control and pneum. Unwinding shaft (core inner diameter 6") Unwinding width: 1350 mm Film roll Ø max: 1200 mm Roll pick-up above floor min: 200 mm Pneumatic longitudinal cutting unit with rotating knife which can also be used for longitudinal perforation. Folding triangle 1350 for the production of a half tube Folding device for the production of a bottom gussets Trimming unit with pneumatic adjustment of the cutting blade Punching tool for punching holes on the FD (folding triangle) for punching ventilation holes in the running film web. 2-hole punching device for the production of suspension holes Seam welding device Welding machine (main machine) with a cycle range length of 2.6 m Pin stacker Number of pick-up stations: 5 The machine has been regularly maintained and modernised. The machine has a total operating time of approx. 100,000 hours. The machine is fully functional and can be inspected and tested by appointment. The system is sold including all accessories and operating instructions

High performance making line for the production of T-shirt bags Possible bag widths 170-410 mm Mechanical speed without material 285 cpm Sealable film HDPE 10-25 my Bio -Unwinder FAU 1600/1200, film width max 1680 mm, reel diam max 1200 mm With ultrasonic sensing head for edge guide system. - Accumulator unit FSS 1600 - Glowband slit sealing unit LTS-GL 1600 for separating and sealing tubular film into individual webs - Side gusseting unit SFE 1600 - Web aligning unit FU-A 1600 - Print register control FV 1350.3 - Main machine INTERmat HT - Double shrink seam sealing unit DKS-HT 1350 - Stacking and blocking station HTV/GSB 1350 - Collecting section AS-HT /GM 1350.3 - Scap conveyor belt AT Voltage:400 V Triphase Frequency: 50 Hz Installed Power: 10 Kw

Type of production : Double-Strength-Handle Carrier Bag with Inside Patch as Handle Reinforcement (hot melt) Unwind width : 1600 mm Max reel diameter : 1000 mm The machine has print repeat control & folding triangle. The machine is in very good condition and ready for production. It is equipped with glue hot melt system for the patch handle, not welded.

Glue patch handle bag Materials: LDPE/ HDPE Max/Min bag width: 650/280mm Max/Min film thickness: 30/90mm Side gusseting unit with depth of 90mm Unwinder with 1200mm rolls Web guide Patch: Type Kaiser, 90mm width, Glued Pneumatic Cutting Unit Wicket final position of bags Trim blower included Power req: 25 kVA/63A

Carrying bag width ranges: 220 - 600 mm Carrying bag height ranges: 300 - 740 mm Material types and material thicknesses: Bag film HD-PE 2 x 20 - 30 microns LD-PE 2 x 34 - 70 microns LLD-PE 2 x 30 - 70 microns Slip film: LD-PE 70 - 90 pm Glue consumption: < 3 g/m2 Unwinder FA-UA 1600/1200 Unwinding width: max. 1600 mm Film unwinding: max. 1200 mm take-up height above floor: 200 mm Equipped with: - Circumferential drive with frequency-controlled three-phase motor 1 AWP 1600 steel, unwinding shaft pneumatic clamping for steel and cardboard tubes clamping range-0: 74 - 76 mm max. reel weight to be loaded: 2150 kg manual winding shaft adjustment to control the web edge hydraulic/motorised reel lifting TA 1600/6 m Dancer unit for web tension and speed control FD 1600 Folding triangle for the production of a half tube Infeed width of the flat film web: max. 1600 mm BF 1600.1 Bottom fold insertion device, for one-sided insertion of a bottom fold bottom fold depth: 30 - 80 mm equipped with - Arrangement on folding triangle - Pick-up frame with spring-loaded folding wheel and spreading device - Charging of the bottom fold DKT 850 Hotmelt Reinforcing sheet application station for the production of handle-hole carrier bags with inner gusset sheet reinforcement Reinforcing sheet Preferential and perforating device VS 850 Servo for pre-welding the bottom fold GS 850 Servo Handle hole punching device, for punching a handle hole STW 850 Cut-off seam welding device, for producing a side seam with welding wedge and welding roller ST-DKT 850 / 600 , Pen stacking product tray for collecting and stacking carrier bags with grip hole Entire unit can be moved up and down pneumatically Servo-drive for wing arms synchronous to the indexing machine, adjustable during production 3 vacuum hubs with 8 wing arms each