Used COLINES HANDrollEX 1000-A Type CFC/100 of 2007 for sale

5 layers coextrusion cast film line for the production of stretch film for hand, machine and jumbo rolls 3x Doteco Android mudular gravimetric dosing batch system for 2 components for extruder A-C-D 1X Doteco Android mudular gravimetric dosing batch system for 3 components for extruder B Structure film ACBCD Extruders: 2x 55/34 mm, 1x80/30 mm, and 1x120/30 mm 5 layers fixed geometry feedblock and automatic flat die (2050 mm) Colines Dual chamber vacuum box Electrostatic edge pinning Diam of chill roll 1400 mm Suction device for trimmed edge with Bigmouth with milling and transport complete with re-feeding system placed in the extruder 120 mm (extruder C) Automatic rewinder ALLSPEEDY III, 3 shafts (2'' and 3'') turret winding unit Thickness control system Electronic System X ray Total gross capacity 1000 kg/h

5 layers stretch extrusion line with 4 extruders IR heating system for the melt pipes Diameter extruders 1x120 mm 1x 80 mm 2x 55 mm Doteco Adroid Grado gravimetric system 2 components Automatic thickness control system High speed pack for achieving a max production speed of 1000 mt/min with a 12 my film at winder Winder ALLSPEEDY IV. Winding formats 2'' and 3 '' Manual, Automatic and jumbo/till 420mm Chiller Thickness range 6-40 my Output max 12my 644 kg/h 17my 913 kg/h 23my 1000 kg/h

9-LAYER COEXTRUSION CAST-FILM ALLrollEX® 3000 mm LINE FOR THE PRODUCTION OF STRETCH-FILM, NET WIDTH 3000 mm IN HAND, MACHINE AND JUMBO REELS Type of structure in coextrusion: ABCEDECFG Reel width formats : 6 x 500 mm Thickness min.-max of film : 8µm ÷ 35µm Thickness tolerance (***): +/- 4% from 8µm to 20µm // +/- 3% from 21µm to 35µm GENERAL CHARACTERISTICS OF CORES Max. tolerance of the cores inner diameter : 0 / + 0.3 mm 2” cardboard cores resistance (hand reels) : N/100mm > 1300 3” cardboard cores resistance (machine reels) : N/100mm > 2400 3” cardboard cores resistance (jumbo reels) : N/100mm > 3200 Max moisture of cardboard cores (UNI 10328-4, 105°C oven) : 8% Diameter of finished reels with 2” air-shafts : 80÷150 mm Diameter of finished reels with 3” air-shafts : up to 420 mm Diameter of air shafts : 2” - 3” Diameter of cast roller : 1400 mm Diameter of cooling roller : 300 mm Max mechanical speed of the line : 800 m/min Capacity of extruder diam.120 mm with LLDPE : approx.700 Kg/h Capacity of each extruder diam.80 mm with LLDPE : approx.400 Kg/h Capacity of extruder diam. 65 mm with LLDPE : approx.200 Kg/h Total gross capacity : approx.2600 Kg/h Reel change cycle of the ALLSPEEDY® IV winders : down to 25 s 7 Gravimetric dosing systems with 4 components for extruders A-B-C-D-E-F-G 2 Single screw extruders PERFORM-EX® diam.120 mm L/D ratio 30 (C-E) with SIEMENS a.c. motors 1 Single screw extruder PERFORM-EX® diam. 80 mm L/D ratio 34 (D) with SIEMENS a.c. motor 4 Single screw extruders PERFORM-EX® diam.65 mm L/D ratio 34 (A-B-F-G) with SIEMENS a.c. motors 7 Pressure and temperature transducers 7 Screen-changers for extruders 1 Framework for supporting the extruders 7 Melt pipes for extruders 1 CLOEREN 9-layer fixed geometry feed-block and automatic flat die REFLEX™ type with ABCEDECFG structure 1 Dual chamber vacuum box 1 Electrostatic edge pinning device 1 Chill-roll unit with a roller diam. 1400 mm and a detachment cooled roller diam. 300 mm 2 Suction devices for trimmed edges BIGMOUTH®, complete with re-feeding system in the extruders diam. 120 mm (C-E) 1 Side-slip device 1 Intermediate haul-off unit 2 Automatic winders ALLSPEEDY® IV (5 patents) - 3-shaft turret winding units, 1500 mm each 1 Electric control system with teleservice and HMI (Human Machine Interface) 1 Accessories and electric, pneumatic, oil hydraulic connections 1 NDC- USA IR ray thickness gauge control system 3 Industrial supervision “fan less” PC’s 1 Palletizing unit for automatic and jumbo reels

4 Gravimetric dosing systems with no. 4 components for extruders A - B - C - D 1 Single screw extruder PERFORM-EX® 120/30 mm (C) with SIEMENS a.c. motor 1 Single screw extruder PERFORM-EX® 80/34 mm (B) with SIEMENS a.c. motor 2 Single screw extruders PERFORM-EX® 55/34 mm (A-D) with SIEMENS a.c. motors 4 Pressure and temperature transducers 4 Screen-changers for extruders 1 Framework for supporting the extruders 4 Melt pipes for extruders 1 CLOEREN/USA fixed geometry 5-layer feed-block and automatic flat die REFLEX™ type 1 Couple of fixed width internal deckles (100 mm per side) 1 Vacuum box 1 Electrostatic edge pinning device 1 Chill-roll unit with a roller diam.1400 mm 1 Recycling device for trimmed edges BIGMOUTH®, complete with re-feeding system in theextruder diam. 120 mm (C) 1 Side-slip device 1 Automatic winder ALLSPEEDY® IV (covered by 5 patents) - 3-shaft turret winding unit 1 Electric control system with teleservice and HMI (Human Machine Interface) 1 Accessories and electric, pneumatic, oil hydraulic interconnections 1 NDC-USA IR ray thickness gauge control system 1 Thermoregulation unit 2 Industrial supervision PCs 1 Palletizing unit for manual, automatic and jumbo reels 1 Pre-arrangement for future installation of edge folding device

Materials: LLDPE ,mLLDPE Output Capacity: 500 kg / hour Film Thickness (Min):11 to 25 mic Film Width (Max): 1500 mm Film Thickness (Max): 30 mic 3 Gravimetric dosing system batch with 2 components for extruders B-C-D. 1 Gravimetric dosing system batch with 3 components fer extruder A. 1 Supervision system for gravimetric dosing systems 1 Integrate feeding system for the gravimetric dosing systems Processing 1 Single screw extruder PERFORM-EX diam. 120 mm L'D ratio 30 (C) with infrared heating and ae motor. 1 Single screw extruder PERFORM-EX diam. 80 mm L/D ratio 30 (B) with infrared heating and ac. motor. 2 Single screw extruders PERFORM-EX diam. 55 mm 1/1 ratio 34 (A-D) with infrared heating and ac. motors. 4 Pressure and temperature transducers. 1 Lever screen-changer with pawl for extruders 120 mm. 2 Lever screen-changer for extruders diam, 55 mm 1 Lever screen-changer for extruder diam. 80 mm. 1 Framework for supporting the extruders. 4 Conveyor units for extruders complete with heaters. Forming 1 Fixed geometry feed-block 5 layers for A-B-C-B-D structure. 1 Flat extrusion die 2050 mm wide prearranged for the automatic adjustment. 1 Vacuum box complete with piping and fan. 1 Electrostatic edge pinning device. Cooling 1 Chill-roll unit with a cylinder diam. 1400 mm, complete with a.c. motor drives, rotating joints and rubber-coated cleaning cylinder. Winding 1 Side-slip device 1 Haul-off unit with automatic longitudinal trim cutting, band slitting and conveying group to separate the webs. 1 Automatic 3-shaft turret winder ALLSPEEDY8 III 3 expanding shafts, 3" to produce stretch film machine and jumbo reels. 3 expanding shafts 60 mm diameter. 3 expanding shafts, 2" to produce stretch film hand reels. 1 General electric control equipment in air-conditioned container. 1 Control system with Teleservice. 1 Centralized control desk of the line with supervisors and HMI (Human Machine Interface). Thickness control Suction device for trimmed edges BIGMOUTH", with milling and transport of the milled material, complete with re-feeding system placed in the extruder diam. 120 mm.