Used ATW MS40 photovoltaic module production of 2021 for sale

EQUIPMENT DESCRIPTION 1. Stringers ATW (Wuxi Autowell) MS40A; year 2020; 2 units One of the ATW MS40a works only on one of the two sides (our technicians started to use it as a spare part resource for other stringers) 2. Stringer ATW MS40T; year 2021 Fully automatic machine, which can be used with different types of silicon solar cells, monocrystalline or polycrystalline, and solder them into a string 2.1.Cell Cell type: 156~230mm silicon cell Cell thickness: 170um to 200um Number of cell busbar: 3BB-12BB (tooling replacement is required for cells with different busbar number). Suitable for 156~230mm half-cut cells 2.2. Ribbon Traditional flat ribbon Type: leaded or lead-free Width: 0.8 to 3.0mm Thickness: 0.18 to 0.32mm Ribbon reel: inner diameter: 16mm or 20mm, outer diameter ≤ 180mm, width ≤160mm MBB ribbon Type: tin lead alloy, hot-dipped Diameter: φ0.29 to φ 0.45mm, tolerance ≤±0.01 Yield strength: 70~80MPa Tensile strength: ≥150MPa Elongation: ≥25% Ribbon reel: inner diameter: 16mm or 20mm, outer diameter ≤ 160mm, width ≤180mm 2.3 Cell string Max. length: 2450mm Cell spacing: adjustable within 1.8mm to 6mm, precision: ±0.2mm; String straightness deviation: ±0.5mm 3. Solar Cell Laser Cutting Machine ATW HC40A; year 2020 Automatic machine used to cut and split full-sized mono-Si or poly-Si solar cells into half-cut cells Capacity: ≥3400pcs/H (full size cell) Uptime ratio: ≥98% Cell size: 156×156~185×185mm Cutting accuracy: ≤±0.1mm Cut depth: 40%-60% of cell thickness Cutting uniformity: ≤±5% Width of laser cut: ≤35μm Width of heat affected zone: ≤100μm 4. Solar cell lay up machine DB-M8-A; year 2020 Automatic layup is the individual equipment of the component automatic production line, it can connect with the auto stringer and the automatic production line, finishing the lay on the glass EVA of string Dimension: L 5260 mm x W 2890 mm x H 2500 mm