Used FISCHER & KRECKE 16S of 2000 for sale

Technical Specifications:

• Printing Width: 1350 mm
• Web Width: 1400 mm
• Printing Repeat (Max): 800 mm
• Printing Repeat (Min): 320 mm
• Drying System: Gas
• System: Sleeved

Other Specifications:

Central Impression Flexographic Printing Press for Printing Solvent Based Inks on Flexible Packaging With Eight Print Stations, a Dry Bond Laminating Station with Rotogravure Print Unit Capable of Adhesive Application and Registered Printing and a Rotogravure Print Unit Capable Of Registered Printing Or Cold Seal Application.

Integrated device for both the plate cylinders and the anilox roll for the quick and easy change of sleeves or cylinders from the operator’s side

Gravure Print Repeat, Maximum 32" (813 mm)
Gravure Print Repeat, Minimum at Maximum Line Speed 20" (508 mm)
Gravure Print Repeat, Minimum at a Reduced Line Speed 15" (381 mm)


Automatic primary turret unwinder Model 11 AW
Primary Unwind Roll Diameter, Maximum 40" (1000 mm)
Primary Unwind Splicing Automatic Splicing Sequence, “Flying Splice”
Primary Unwind Tension, Total, Minimum 5 lbs. (20 Newtons)
Primary Unwind Tension, Total, Maximum 125 lbs. (550 Newtons)

Automatic Secondary turret unwinder Model 11 AW
Secondary Unwind Roll Diameter, Maximum 40" (1000 mm)
Secondary Unwind Core Diameter 3" to 10”
Secondary Unwind Splicing Automatic Splicing Sequence, “Flying Splice”
Secondary Unwind Tension, Total, Minimum 5 lbs. (20 Newtons)
Secondary Unwind Tension, Total, Maximum 56 lbs. (250 Newtons)


Automatic turret rewinder Model 12 AW Automatic
Rewind Roll Diameter, Maximum 40" (1000mm)
Rewind Splicing Automatic Splicing Sequence, “Flying Splice”
Rewind Tension, Total, Minimum 5 lbs. (20 Newtons)
Rewind Tension, Total, Maximum at core O.D 125 lbs. (550 Newtons)
tapering at maximum reel diameter to 74 lbs. (330 Newtons)

Press Mechanical Gear in Speed, Maximum 1500 ft/min. (460 m/min.)
Laminator/Cohesive Mechanical Gear in Speed, Maximum 1500 ft/min. (460 m/min.)

SUBSTRATES, SUBJECT TO TENSION RANGE
Polyethylene, Maximum 6 mil (152.4 Microns)
Polyethylene, Minimum 0.8 mil (20.3 Microns)
Oriented Polypropylene, Maximum 6 mil (152.4 Microns)
Oriented Polypropylene, Minimum 0.48 mil (12.2 Microns)
Polyester, Maximum 2.5 mil (63.5 Microns)
Polyester, Minimum 0.35 mil (8.9 Microns)
Nylon, Maximum 2.5 mil (63.5 Microns)
Nylon, Minimum 0.35 mil (8.9 Microns
Paper, Maximum 50 lb/3000 ft2 Ream (81 gms/m2)

The Press line is designed for Solvent Based Ink’s and/ or Lacquers. Waterbased inks can be run on the equipment as well without modification. However, the Autoclean Wash Up System including the chamber doctor blades are designed to run solvent inks only. Additionally, the press line is designed to be able to be converted, with additional equipment, from the current format for the exclusive use of Ultra Violet cured inks at a future date.

The line is designed for Solvent Based Adhesives. Waterbased adhesives can be run on the laminator as well without modification.
The line is designed for Water Based Cohesive

Fischer & Krecke Autoclean Flexographic Ink Distribution System
Bloss Viscosity Control System Viscolor 2200 for an Eight Color Press
Enercon ASO41PV-300”H” Universal Roll Treating Station
Eltromat Web Video 2001 Viewing Device
Eltromat Meshcon System FD,
Web Video System (Eltromat) For Web Viewing Front And Back Side of the Web with Cold Seal Application


30 Anilox and 30 sleeves available

Other Details:

Guarantee: Without guarantee

Current condition: Not running. Can be shown with material

Availability: Immediate

Voltage: 480 V Triphase
Frequency: 60 Hz

MachinePoint's services:

---

Loading and lashing

Packaging

Dismantling

Core Cutting machines

Refurbishing & Overhauling services

Used Machinery Appraisals

Transport of industrial machinery