Used CERUTTI CR_108 MB of 1995 for sale

Machine Cerutti 28R, 8 colours, completely renovated in 2007 : all electronics, tension control IN and OUT on unwinder, rewinder, infeed, central motor, web guide (Gama) and corona treatment. Unwinder double Ø800 Rewinder double Ø600 Material passage 960mm, printing width 920-940mm Printing repeat 350-900mm All stations are double (1500+1500mm) (length of drying area) Antistatic system GFK viscosity AVT inspection system Register control system Bobst Registron S4100 8 gas burners 14 electrical pumps Filters for the inks

9 trolleys Automatic winder and rewinder Webguide BST Web cleanner Not included Dryers set up First six sections – single dryer, Sections 7 and 8 – double dryers. Turning bars installed after section #6, can be used after 6th or 7th section) Corona treater AFS ESA manufacturer type ENULEC ESA1000 L\C. (Available new unused Enulech charging system) CO2 system No existing system, only nozles installed Viscosity control Fastnacht - (Available new unused Fastnacht VC system) No LEL system Pre register system Manual Register system Eltromat Camera system AVT, 100% inspection AVT Drive systems ALLEN Bradley Motion & Printing units Chiller Industrial Frigo. GR 14V 607Z -C (45A 380V). Open loop. Cooling water cylinder On each section. Ink pump type 3 phase motor direct controls Total printing cylinders 433 List of included cylinders 1170 mm width (print step in mm): 500x1 630x10 520x8 630x40 540x7 633x6 550x3 640x8 560x8 650x41 562x8 660x13 570x36 680x21 580x35 690x10 582x15 725x7 600x26 780x5 620x8 812x16 625x63 List of included cylinders 1370 mm width (print step in mm): 500x7 647x6 650x16 690x8 746x1

Materials: Paper 50-100 g / m2 BOPP 18-40 microns PET 12-20 mm OPA 12-20 microns PP 12-50 microns Minimum web width - 700 mm The maximum web width - 1220 mm Maximum roll diameter: 1000 mm The maximum roll weight: 1400 kg. The range of web tension: 4 - 40 daN Full rotation of the cylinder with a maximum diameter of the roll. Rewinder 2 +2 expandable cone bushing with an inner diameter of 76 to 152 mm. Winder two expandable cone bushing with an inner diameter of 152 mm. Gluing of the web during the movement in two directions Printing sections of type ES 960 A drying chamber model B0 Max. drying length (m): 2.7 Max. the air temperature at the nozzles (° C): 130 Number of nozzles for supplying air: 18 Max. velocity of air coming from the nozzles (m / s): 35 Max. air volume (m3 / h): 7700 In sections 9 and 10 of the drying chamber model M0 Max. the length of the dryer (m): 5.7 Max. the temperature of the nozzles (° C): 140 Number of nozzles for supplying air: 24 Max. velocity of air coming from the nozzles (m / s): 45 Max. air volume (m3 / h): 10,000 The circuit is designed according to the requirements of ventilation LEL 1 bay leaf before reversing sections 9 and 10 Web inspection (two-sided with the camcorder firm AVT) The equipment is equipped with a corona treatment. Web Guide eltromat 20 trollyes for cylinders Steam drying system

Drying system is heated air (supplied by thermaloil – high temperature fluid - heat exchangers). Gas burner and chiller not included since use for new machine that will be installed to replace this one Printing repeat length (cylinder circumference) is from 450mm up to 920mm. Max web width: 1320mm Min web width: 660mm Sleeve size: 450-920mm Max roll diameter unwinder:1000mm Max roll diameter rewinder:1000mm Speed: 350m/min Winder Axes diameter: 70,76mm (cones for 150mm diameter) Max roll weight:1000kg Corona Softal AVT Printvision Jupiter Video Viscosimeter Bloss Eltromat register Air preassure: 6 bar Electrical req: 3x380V, 50HZ Poqer req: 612kW web direction: right to left Materials: Laminates 30-150g/m2 OPA 12-40 microns BOPP 12-40 microns OPP 12-50 microns PET 12-40 microns PE 35-80 microns Paper 40-200 g/m2 2 sets of trolleys, 16 trolleys no cylinders incl. Delivery: Q4 2018

Printing direction from operator side: from left to right; Used ink system: solvent-based; Viscosity system: BST Eltromat; Automatic ink cleaning system: not available; Cold seal application availability: yes; Eltex: from unit 1 to unit 8; Web direction change: in printing unit 1, 9 and 10; Corona treater: 1 pc of Softal; Drying type: Thermo oil. Camera type 1: BST Eltromat 1 pc of 100% for full web width; Camera type 2: Inspection; Camera type 3: black and white, used for Cold seal application. Max. printing width: 1300mm; Max. raw material width: 1320mm; Min. raw material width: 600mm; Printing circumference: 450mm – 920mm; Unwinder max. reel diameter: 1000mm; Unwinder core inner diameter: 70mm, 76mm, 152mm; Rewinder max. reel diameter: 1000mm; Rewinder core inner diamater: 70mm, 76mm, 152mm; Automatic reel change: yes; Antistatic unit on rewinder: 2pcs of Meech; Flagging system: yes.