Used WINDMÖLLER & HÖLSCHER Dynastar of 2016 for sale

3-layer extrusion line for shrink and lamination film. 60/90/60/60 LD 30 extruders. Doteco Grade dosing units 6 components for the main extruder, 4 for the 60 mm extruder. Head with IBC 250/400, installed die 350 mm Thickness control system Kundig Rotating haul off with gusseting (550 mm). Corona treatment on one side Double rewinder Filmatic O, 1800 mm Thickness 20-250 my Power consumption during operation 400 kVa Plasmac Alpha 45 trim recycling unit, year 2020 Chiller and heat exchanger Tower 22.000 working hours

Pick up start September Electronic Line Shaft system (ELS) Materials: OPP, OPA, BOPP, 0.010-0.030 mm PETP 0.030-0.060 mm, 0.060-0.100 mm Paper, composite 25-50 gi/m2 Film 50-120 g/m2 Shaft inner diameter unwinder/rewinder: 76 / 152 mm Shaft outer diameter unwinder/rewinder : 85mm Mechanical speed: 365m/min AVT Prinvision Argus Camara System Register control B&R 2005 Power requirement: 360 kVA Hundreds of cylinders can be purchased with machine, ask for prices per unit

Info of 1 x AD 2366 NC bottomer : Bag width : 280-550mm Bottom width : 70-160mm Open bottom width : 180-400mm At this location there are 2 x AD 2366 NC and 3 x AD 2368 for sale S-Press and Automation after Bottomer available at separate price. All the machines are set as open mouth machines only. Special equipment installed on the machine you see on the pictures to produce Mailer bags, will be removed before sale.

Reel diameter at rewinder and unwinder 600mm Core diameter 76mm Maximum speed 200m/min Solvent ink system BST super Handy Scan digital 4000 web preview Electric ink pumps 10 pcs. 10 pcs.chambered doctor blades Printing plate mounting device Printing sleeves 176 pcs. Gear wheels 184 pcs. Aniloxes 35 pcs. Sleeves Nr raport quantity gears 1 250 8 8 2 260 8 8 3 270 8 8 4 280 8 8 5 290 8 8 6 300 8 8 7 305 8 8 8 310 8 8 9 320 8 8 10 330 8 8 11 340 8 8 12 350 8 8 13 355 8 8 14 370 8 8 15 380 8 8 16 400 8 8 17 405 8 8 18 410 0 8 19 420 8 8 20 440 8 8 21 455 8 8 22 480 8 8 23 500 8 8 Anilox quantity 140 6.0g 9 140 new 8.0g 2 200 4.0g 1 250 4.0g 8 250 new 4.6g 4 120 8.0g 1 80 14.0g 1 320 3.8g 3 240 6.0g 2 440 2.0g 3 100 10.0g 1

9-layer coextrusion line VAREX II for the production of barrier film & stretch hoods with Filmatic S II double winder, in combination with ISP module Installed melting capacity approx. 2050 kg/h Min working width. 1.560 mm Line speed max. 120 m/min Thickness 20-250microns Extruder combination 70.30D / 60.30D / 60.30D / 60.30D / 60.30D / 60.30D / 60.30D / 60.30D / 70.30D Screw type(s) HPS 9 MODULE(S) G3 - GRAVIMETRIC DOSING AND THROUGHPUT CONTROL Continuous gravimetric dosing of one main component per extruder Can be expanded to a total of 5 secondary and additive components per extruder PROCONTROL TS operating station ANCILLARY OR ADDITIVE COMPONENT(S) FOR SUCTION CONVEYING SYSTEM(S) FOR MODULE G3 Extension of the MODULE G3 with secondary or additive components Separate weighing hopper for each individual component Metering via wide-range metering screws 1 dosing screw per secondary or additive component Configuration for extruder A 2 Secondary component(s) 3 additive component(s) Configuration for extruder B, C, D, E , F , G, H 1 secondary component(s) 1 additive component(s) Configuration for extruder I 2 Secondary component(s) 3 Additive component(s) 2 SUCTION CONVEYOR SYSTEM(S) FOR MODULE G3 for extruder 70.30D, conveying section: M for fully automatic, effective pellet feeding of the main component SUCTION CONVEYOR SYSTEM(S) FOR MODULE G3 for extruder 60.30D, conveying distance: M 10 AUXILIARY OR ADDITIVE COMPONENT(S) FOR SUCTION CONVEYING SYSTEM(S) FOR MODULE G3 for extruder: 70.30D, conveying section: M for supplying pellets to the secondary or additive component(s) 14 ANCILLARY OR ADDITIVE COMPONENT(S) FOR SUCTION CONVEYING SYSTEM(S) FOR MODULE G3 for extruder: 60.30D, conveying section: M for supplying pellets to the secondary or additive component(s) 2x Extruders 70.30D 2 BASIC EQUIPMENT(S) for extruder 70.30D with bimetal grooved bush max. drive power: 82 kW max. speed: 180 1/min 2 HPS SCREW CONVEYOR(S) 7x Extruders 60.30D 7 BASIC EQUIPMENT(S) for extruder 60.30D with bimetal grooved bush max. drive power: 60 kW max. speed: 200 1/min 7 HPS SCREW CONVEYOR(S) Blow die head type 400/550-9 Die plate set of 550 mm diameter Internal and external Die Lip heating Die gap 1.25 / 2.25 mm Cooling ring ARCTIS DL 2100 M Cooling ring insert: Dual-Lip (2 air outlet levels), Blow-up ratio: 1.8 - 3.5 Optifil P2K Profile Control VARIOCAGE Calibration Basket with CFRP rollers Working width: 870 - 2600 mm 6 levels with 12 rollers each Extraction the monomer cooling air above the frost zone. Also Monomer separator for monomer suction MODULE K-NDC Non-contact rotative radiometric Profile Measurement Unit MODULE B - Width measurement control via width measuring bar Rotating MULTINIP Film Take-Off Unit ADDITIONAL BEAD STRIP FLATTENING unit for gusseted film with Two flattening frames SIDE FOLDING DEVICE in extended version Max. width up to 6400 mm before installation of the sealing surfaces Triangular side folding tools VAREX II Flatness package for achieving the best flatness using NOSTIC film take-off unit to minimize scratches Working width: 2600 mm Take-off speed: max. 120 m/min WATER BATH with film drying between film take-off and winder advance to reduce curl for asymmetrical barrier films (with PA in the outer layer) Working width: max. 2600 mm Web speed: max. 80 m/min Filmatic Double Winder "S" Max Roll diameter:1200mm Max Roll weight: 2500kg Winder cores: 76/152mm Total connected load approx. 1030 kVA with a simultaneity factor of 0.60