Used TECNOMATIC LC-50 for sale

Complete PE extrusion line consisting in: 1) Single screw extruder TECNOMATIC LC 75.30 Year 1999 (completely overhauled 2015 & 2016) New screw in 2002, INOEX gravimetric 2) Granulate conveying device LABOTEK CON EVATOR SF 2/2 Year 1995 (completely overhauled 2015 & 2016) Range 400kg/h 3) Spiral mandrel distributor pipe head CINCINNATI PO 110 Year 2003 (completely overhauled 2015 & 2016) Range: Ø 20-125mm, 500kg/h max. Tools: Ø 90 x 5,1mm; Ø 83 x 4,7mm; Ø 75 x 4,3mm Incl. calibration sleeves, end seals and calibration half shells 4) Vacuum bath GFK 125/6 Year 1991 (completely overhauled 2015 & 2016) Range: Ø 20-125mm 1-chamber system, length 6000mm 5) Spray bath BATTENFELD K1-110-6,0 Year 1998 (completely overhauled 2015 & 2016) Range: Ø 20-110mm Length 6000mm 6) 2 Haul-off GFK R 160-1200 Year 1193 (completely overhauled 2015 & 2016) Pipe range: Ø 50-160mm Speed: 5m/min Contact length: 1200mm Synchronized with INOEX AUREX MK 125 7) Saw VON HEIN TV 110H Year 1993 (completely overhauled 2015 & 2016) Linear encoder Range: Ø 40-110mm 8) Winder EW 3200 Year 2014 Incl. ultrasonic control, tube end pressing device, electrical length measuring device, safety light barrier, castors, knee lever reel, manual battery strapping tool with strap dispenser, time relay 9) Water temperature control unit COREMA PC/AC 90 EE2 Year 2001 (completely overhauled 2015 & 2016) Range: 7-15ºC Incl. 5 water storage tanks á 1000l 10) Ultrasonic measuring unit AUREX MK 125 Year 2014 11) Marking unit INKJET Year 2014 Range: Ø 10-140mm

The extruder was refurbished at 2010 and a new PLC with screen was installed

3-layer with regulation outer and inner layer up to aprox.25% from total thickness of pipe. Inner layer cooling by water. All dimensions of produced pipes in accordance with EN 12 201,DIN 8074-75, ISO for PE pipes. (PE pressure pipes). Tooling 315-355mm SDR11 SDR17 Tooling 400-450-500mm SDR11 SDR17

3-layer with regulation outer and inner layer up to aprox.25% from total thickness of pipe. Inner layer cooling by water. All dimensions of produced pipes in accordance with EN 12 201,DIN 8074-75, ISO for PE pipes. (PE pressure pipes). tooling 90-110mm SDR11 SDR17 tooling 125-140mm SDR11 SDR17 tooling 160-180mm SDR11 SDR17 tooling 200-225mm SDR11 SDR17 tooling 250-280mm SDR11 SDR17

Die Head for PVC Pipes Model : LC50V Toolingl : PVC pressure pipe 400*19.1 mm