SML CC/90, 60, 60, 60/2100/650 of 2022 used

Other Specifications:

SML - COEXTRUSION CASTFILM LINE STRETCH WRAP FILM CC/90,60,60,60/2100/650

Film thickness range 8 - 35 ìm
Final film width part bobbins 3 x 500 mm
Coex Structure / No. of layers 5 layers
Layer distribution B / A / D / A / C
Percentage 10 / 35 / 10 / 35 / 10 %
Raw materials: LLDPE 2,8 - 5,0 g/10min 190°C/2,16kg
VLDPE 2,8 - 5,0 g/10min 190°C/2,16kg

Extruder "A" 90/33 L/D Output max. LLDPE 800 * kg/h
Extruder "B" 60/28 L/D Output max. LLDPE 200 kg/h
Extruder "C" 60/28 L/D Output max. LLDPE 200 kg/h
Extruder "D" 60/28 L/D Output max. LLDPE 200 kg/h

Flat die lip width 2.050 mm
Roll width 2.100 mm
Chill roll C1 Ø 1.600 mm
Mechanical speed max. 650 m/min

MATERIAL FEEDING AND DOSING "A"
1 Material feeding / main component SML/MC/1000
1 Material feeding / additional component SML/AC/1000
1 Gravimetric batch dosing system SML/GB/2/750 mounted directly on the extruder, 2 components

MATERIAL FEEDING AND DOSING "B,C,D"
3 Material feeding / main component SML/MC/300
6 Material feeding / additional component SML/AC/300
3 Gravimetric batch dosing system SML/GB/3/300 mounted directly on the extruder, 3 components

Extruder "A"
SML Single-Screw Extruder SML-ES-90/33
Tool unit - manually operated screen changer SML-MF-man/90

Extruder "B,C,D"
3 SML Single-Screw Extruder SML-ES-60/28
3 Tool unit - manually operated screen changer SML-MF-man/60

1 5-layer feedblock FG
1 Automatic flat die - H 2.050 mm Cloeren REFLEX die for automatic die control
1 Die splitting system for separation of the flat die bodies for cleaning
1 Vacuum box 2.050 mm
1 Triple-Chamber Vacuum box SML-TC/2050mm
1 Casting section 1200 SML-CS/2100/650
1 Upgrade Casting section 1200 / 1600 - Upgrade Cooling roll diameter - cooling roll C1 with matt surface Ø 1.600 mm
1 Electrostatic edge pinning device
1 Thickness measuring unit for automatic dies stretch wrap film X-Ray-sensor
1 Recovery system for refeeding of Stretch-Wrap-film with vertical scraptruder for SML Single screw extruder 90 mm
1 Antistatic pipe
1 Power supply unit for antistatic pipes

1 Cast Film - Turret Winder Series W4000 For STRETCH WRAP FILMS for 2" hand rolls and 3" hand-, machine- and jumbo rolls
max. end film width 3 x 500 mm
nr. of turrets 1 pcs.
nr. of winding shafts 4 pcs.
winding shaft diameter Ø 3 "
mechanical. winding diameter for 3" part bobbins max. 400 mm
min. winding diameter min. 82 mm
winding tension 15 - 100 N/m
contact pressure 50 - 500 N
cycle time with 3" core magazine 20 - 25 sec
High speed Cast Film - Turret Winder for stretch wrap film, suitable for 3" air-shafts winding in contact mode

1 Modification package W4000-4S W4000-4S/3 up for 2" core operation / W4000-4S
max. mechanical. bobbin diameters 2": max. 180 mm
winding shafts 2 "
1 Automatic core- and roll handling system W4000 4S1T for each turret
1 Oscillating frame SML-OF/2100
1 SML Automatic control system SML-CS-2/SMILE/4 extruder
1 bitWise Core SML.bW-Core
1 E-Container 20'

Similar Products:

SML EcoCompact CC/90,90,60,60/2700/650

Stretch film extrusion line

2019

Ref: 300049957

SML

More information

SML Minicast CC/90, 60, 60, 60/2100/650

Stretch film extrusion line

2017

Ref: 300050174

SML

More information

COLINES HANDrollEX

Stretch film extrusion line

2012

Ref: 300049592

COLINES

More information

PRIMPLAST Coex

Stretch film extrusion line

2002

Ref: 300046056

PRIMPLAST

More information

TECNO COATING 2000/NG-3E

Stretch film extrusion line

2005

Ref: 300046988

TECNO COATING

More information

ALPHA MARATHON Air Bubble Extrusion Line

Air bubble film extrusion line

2012

Ref: 300047105

ALPHA MARATHON

More information

YEN SHENG YSW-100T

Air bubble film extrusion line

2017

Ref: 300047087

YEN SHENG

More information

FENG YUAN FY-Q2000M

Air bubble film extrusion line

2007

Ref: 300049960

FENG YUAN

More information

Machines sold in the past:

SML CPP year 1998

Materials: CPP Film Width (Max): 2150 mm Number Of Extruders: 3 Screw Dia-A : 65 Screw Dia-B : 150 Screw Dia-C : 65 Other specs: 3 Coex Castfilm for CPP, Mono layer/Multi-layer Gravimetric Dosing System included Die – Cloeren Make -USA Deckle – Yes. Internal Type Corana Treatment – Sherman – 22KW – Italy Make Thickness range: - CPP 15 - 35 µm Max. Mechanical speed 350 m/min Pneumatic working pressure 5-8 bar Air consumption approx. 60 - 300 Nm3/h Control System SML - Siemens S7-300-2017 Temperature control system: - Water cooled material inlet - Heated feeding zone Output: - CPP for max. 500 kg/h to 650 kg/h DC motor with elastic coupling and reduction gear with capacity of A extruder 290 kw Bimetal extruder cylinder with 8 heating / cooling zones Melt pressure feeler at cylinder end 3 Layer Feed block FG/SP H Automatic CLOEREN make flat die H2450 Dual Vacuum box width 2480 mm (assembled at the flat die) Edge Pinning Device with 2 charging electrodes, 2 air jets, a pressure regulator, a high voltage transformer and 2 adjusting support for electrodes and air jets Cooling Roller C1 - width 2500 mm - diameter 800 mm - roller surface electrically dulled Cooling Roller C2: - width 2500 mm - diameter 550 mm - roller surface hard chromium plated, polished Pressing / cleaning roll width: 2500 mm DC servomotors for Roller C1 and C2 Longitudinal and Heights adjustment motors Roller temperature control with 2 cooling circuits, pumps and a connection to external water circuit Thickness Measuring JASCH Auto Scanner Krypton 85 - Radioactive Edge Trim Device 1: - Both Side Trimming System - 2 blade holder for 2 blades - 2 suction pockets WINDER winding mechanical speed: 35 - 350 m/min winding width 2050 mm width of contact roller 2500 mm Film thickness 15 - 100 µm Lay on pressure contact roller 30 - 300 N Winding Tension 10 - 200 N/m Bobbin diameter at 6" shaft: max. 800 mm Bobbin diameter at 6" shaft: max. 920 mm Main frame with web tension measuring roller, 2 fix point rollers, dancer roller, contact roller and 2 winding stations Cross cutting unit Oscillation unit Shaft handling system with portal robot Automatic roll handling system with bobbin carriage and turret unit for winding shaft Electrostatic discharging bar with transformer

SML 6C/150, 75/2000/70 year 2011

PET sheet Extrusion line Crystallization unit Piovan Dryer Dosing unit PIOVAN, Gravimetric Dosing Unit Screws 150 and 75 mm Die VERBRUGGEN, 2000mm Rewind type Winder Series 4000 Max. rewind reel diameter 1200 MM Thickness measurement Domino Electronic Systems S.P.A In line edge trim collection with Tria Recycling unit Slitting machine Ashe

SML CC/75, 90HSE, 90HSE, 75, 45/3800/650 year 2010

5 layers stretch extrusion line with 4 extruders A:75/33D , B:90/33D, C: 90/33D, D:75/33D mm Die Nordson, 3600 mm AOM XVII-100/ 40// ENC// MF8 , Min – Max material thickness 9 – 45 my Max. Output 1500 kg/hour (23 micron) Rewind 3” shaftless winder stations Max. rewind reel diameter 450 mm Dosing units Doteco Grado Thickness measurement Inline Edge trim and Recycle system Starlinger Including Noel 1 rewinder year 2011 Noel 2 rewinder year 2012 2x Class Engineering rewinders year 2014

SML ECO-COMPACT CC90, 90, 60, 60 /2700/650 year 2013

Stretch extrusion line with 4 extruders 2x 90/33 mm and 2x60/28 mm Automatic die Cloeren 2700 mm Min – Max material thickness 10 my - 35 my Max. Output 15 – 20 my Net output 1100 kg / hour from 20 my Net output 1200 kg / hour Rewinder Winder Series 4000 Max. rewind reel diameter 440 MM Number & sizes airshafts winder 2 shafts 76 MM (dia) Hydraulic screen changer DOTECO, Gravimetric Dosing Unit 3 components per extruder Thickness measurement Electronic Systems Edge guide Recycling machine in line STARLINGER recoStar Basic 85

SML EasyCast CC/90, 60, 60/2100/650 year 2015

Coextrusion Cast film line - EasyCast for Stretch Wrap film For hand / machine / jumbo rolls 3 extruders – 5 Layers: ABBBC Film Thickness range: 8 to 45 micron Final film width: 3x500 mm Raw materials: LLDPE & VLDPE Extruder A & C (LLDPE) Size : 60mm x 28 L/D Output max : 190 kg/h Extruder B (LLDPE) Size : 90mm x 33 L/D Output max : 800 kg/h Flat Die lip width: 2000 mm Roller width: 2100 mm Chill Roll diam. 1200 mm Mechanical max. speed: 650 m/min Winder Type L 4000 – 4 winding stations Winder mechanical speed : max 650m/min For 2” hand roll + 3” machine/ jumbo rolls Installed electrical power for one line approx. 702 kW Necessary Cooling capacity approx. 422 kW Output calculation: Stretch Wrap Film - 2" cores - hand rolls: 9 micron, 537 m/min Total extruder output: 534 kg/h Stretch Wrap Film - 3" cores - hand rolls: 12 micron, 560 m/min Total extruder output: 742 kg/h Stretch Wrap Film - 3" cores - machine rolls: 15 micron, 600 m/min Total extruder output: 994 kg/h Stretch Wrap Film - 3" cores - machine rolls: 17 micron, 600 m/min Total extruder output: 1126 kg/h Stretch Wrap Film - 3" cores - machine rolls: 23 micron, 465 m/min Total extruder output: 1181 kg/h

Used SML CC/90, 60, 60, 60/2100/650 of 2022 for sale

Data Sheet of Used SML CC/90, 60, 60, 60/2100/650

Technical Specifications:

Other Specifications:

Other Details:

MachinePoint's services:

Similar Products:

Machines sold in the past:

Meet US At