Used Sheet coextrusion lines: UNION Table 1000 of 2005

Heating zones:20 Melt pressure indicator No take off Filter changer with diameter of 100mm PLC : Siemens

Silo with Stirrer pre-mixing and conveying any plastic materials Big Silo (13000-litre capacity) The outer body of the silo weighs approximately 1800 kg. Stirrer inside the silo Screw conveyor (big) -Size: 160 x 5200mm Screw conveyor (small) -Size: 250 x 2290 mm Overall framing of a silo and its bin Material collection bin connected to the main small screw conveyor Approximate Capacity: 650 litres Pressure-conveying bins (03 no.) An electric panel with electronic assessors for driving AC motor (driver of the stirrer, 15 KW)

Die Head width: mm 1050 Die gap: mm 0.1 to 2 Degassing Electronic System thickness control system

New line for XPET production Output capacity: up to 300 kg/h Film density: 75-100 kg/m3 Film thicknes: 1.5 -2.5 mm Film width: 550 mm (2 sheets) or 1100 mm х 1 (1 sheet) Rolls diameter: max. 1000 mm Height of screw centerline: 1050 mm Feeding and gravimetric dosing unit no. 1 Dosing device type DV 250 (KF6), output 50-1000 kg/h of flakes no. 1 Dosing device type DV 150 (KF6), output 30-800 kg/h of granule no. 1 Dosing device type DV 50 (KF 0.5), output 3-70 kg/h of granule no.2 refill hoppers of 100 L, discharge valve dia. 300mm no.2 refill hoppers of 5 L, discharge valve dia. 100 mm no. 1 dosing devices support frame for 1 component and cabinet mod. TA6DA no. 1 hopper for material collecting from dosing devices to extruder Twin screw extruder ZP 71/40 D Continuous screen changer Single screw extruder 130/32 D Dynamic mixer Extrusion die Die diameter: 160 mm Blowing agent dosing device Cooling ring Cooling calibrator Two "S" take-off units Diameter of rolls: 400 mm Width of rolls: 1300 mm Two twin winders Number of winding stations; 2 Number of shafts;2 Diameter of shafts; 300 mm Width of shafts: 1100 mm Width of film: max. 1100mm Diameter of coils: max.1000 mm Winding speed: max. 50m/min

Extruder 120/30D with double degassing Motor : ABB TRETRAVEC 250 L 1, Kw 230 Screen changer EREMA SW 4/170 TRF, diam. 170 mm Melt pump: UPG 280 Flat die head Simplas 1350 mm widht Vertical calender width 1400 mm Upper cylinder diam. 450 mm Central cylinder diam. 600 mm Lower cylinder diam. 500 mm drive of each roller by independent ABB geared motors cooling: independent water inlet and outlet Cantilever rewinder for reels max. diam. 1000 mm 2 Shafts of 1000 mm 2 Shats of 630 mm No. max. reels 2 In-line slitting Spare parts: 1 lower calender cylinder New srew Inverter ABB Dosing system not included