Used HUBER & GRIMME HG 2500 T of 1996 for sale

The absolute travel distances are approx. 1550 x 2600 x 850 mm Rapid traverse of the system in X/Y - up to 60 m/min, in Z-30 m/min, in A-axis 9000°/min, C-axis 18000°/min. Rotary axes with preloaded bearings, maintenance-free - Max. Rotation range 540°, - Max. Max. swivel range of the milling unit 365°- Total table surface : approx. 1100 x 2000mm 5006 Jäger spindle HF Z 80 with tool changing system / 13-fold with servo motor Milling spindle 2.8kW/40,000 rpm, ceramic bearings WK 19 Automatic door units CNC software module for NUM

40.000 working hours in very good condition. Completely overhauled replacement milling spindle and an ESTA extraction system included. Is possible production of 2 identical or 2 different parts Total travel 3100x2500x1100mm X/Y/Z Extension of the Z-axis by 200mm = 800 WM Y-axis extension: 2x1400mm per table Max 3D machining dimension per table approx. 2500x1400x800mm Max 3D processing dimension coupled approx. 2500x1400x800mm Max. Max. turning range 540º /max. swivelling range milling unit 285º NUM control 1050 with WIN10 IBAG milling spindle 6kW up to 40000rpm Tool magazine travelling in Y 12-fold plate Slipping clutch in X+Y Remote maintenance diagnosis Network card Compressed air connections on the table Soundproof cabin

Cube Dimensions: 1000x1000x600mm Servo The Siemens control card is defective and must be purchased online and programmed by HG.

Still in full use and fully functional. Spindle new from 2022. Operating hours: As of October 2023 approx. 55,000 . Machine has been in series operation for 7 years in one shift and 12 years in two shifts Last audit: According to manufacturer's specifications, everything fully functional. Machine documentation complete. Complete repair documentation available Traverse Paths: X 1,000, Y 1,400, Z 700 Cube dimension: X 1,000, Y 800, Z 400 Spindle: Jäger, 2.5 kW, 40,000 rpm, WK19, in use since November 2022. Tool changer for 12 tools Rotary table, aluminium C-axis: 850mm. +/- 1,080 degrees Swivelling head A-axis: +/- 185 degrees NUM control unit with mobile control panel. Interface for data transmission Vacuum pump Busch Spare parts: Frequency inverter from 2018 (from SN325) Frequency inverter defective (known fault) Spindle cable new unused 3/2 way valve new unused

3D machined cube dimension X/Y/Z 2450/1100/600mm i.e. machine range approx. 3000/1700/850mm. IBAG milling spindle 6kW with 4500-40000rpm Tool magazine plate 12-fold NUM control 1050 with Windows XP Renishaw measuring system OMP40 Tool breakage and length control TS27R Safety system Brankamp Teach-in box NUM Without protective devices, this would have to be fitted by HG during assembly in order to obtain CE conformity Good condition, few operating hours