Coupeuse au format: ABG DIGICON SERIES 3 BETA de 2015 d'occasion

Fiche technique: ABG DIGICON SERIES 3 BETA d'occasion

Ref.: 300049088

Marque: ABG

Année: 2015

D'autres caractéristiques:

DIGICON SERIES 3 - Machine to be configured in right to left format.
Basic Equipment Comprising Of:
Cantilevered Ø800mm unwind module.
Pneumatically braked unwind module complete with programmable end of roll slow or stop, automatic tension control, Ø76mm air expanding unwind mandrel and localised HMI controls.
Electronic web guide with ultrasonic edge guide sensor and adjustable splice table, interlocked web clamps and tape dispenser.
Space suitable for mounting web cleaner, corona & static elimination.
Servo driven full rotary quick change flexographic printing station.
Servo driven full rotary quick change flexographic printing station suitable for flood coating only, complete with light weight ink cartridge, Teflon coated high-capacity ink pan for easy wash up, rubber pick up roller, ceramic anilox roller (screen to customer’s choice), reverse angle doctor blade and one 11” rubber covered coating roller (coating width of 325mm as standard).
GEW E2C low energy air cooled UV curing station 140w/cm (10”-25½” repeats available, tape and plate specifications also required).
Servo driven semi rotary die cutting station.
Servo driven semi rotary die cutting station complete with magnetic cylinder suitable for semi-rotary die cutting only.
Complete with automatic die pressure on/off, re-register servo drive, electronic longitudinal register control and manual lateral register control.
Servo driven shuttle assembly for semi rotary web motion.
Servo driven full rotary infeed nip assembly with pneumatically pressurised nip roller.
Machine to be supplied with 25 ½” cylinders as standard unless otherwise specified as “Special Note”.
Servo driven waste matrix stripping.
Servo driven waste matrix stripping assembly, with lay on roller, independently motor driven for precise tension control, maximum roll of Ø800mm.
Foot pedal for easy setup of the waste matrix stripping.
Servo controlled rewind module.
Single spindle (upper position) product rewinder complete with Ø76mm air expanding rewind mandrel suitable for winding labels in/out

1 Vetaphone corona treater model CP01 with integrated controls and ventilator for conductive and non-conductive substrates. (other sizes and powers available on request)

1 Upcharge from full rotary flood flexo only print station to re-register rotary flexo print station.
Adds a Servo driven full rotary infeed nip assembly with pneumatically pressurised nip roller to the flexo module.
Re-register sensor and 1 plate cylinder to customer’s specification (10”-25½” repeats available, tape and plate specifications also required)

1 Upcharge from full rotary re-register flexographic printing station to semi rotary flexographic print station.
complete with servo driven semi rotary shuttle.

1 Low inertia chill roller for operating in full rotary web motion only, chiller required.

1 Servo drive to chill roller.

1 1.8kW chiller for single lamp system.

1 Electronic dispro SOFTWARE upgrade subject to speed, die pattern and materials. Drive roller is included as standard

1 Kocher & Beck Gapmaster with lubrication system for semi rotary and full rotary re-register die cutting, fixed - not moveable.

1 Overlamination suitable for cold foiling/super varnishing and for handling laminate with or without carriers and complete with moveable quick release nip roller assembly.
Capable of operating in full rotary mode for cold foiling but with speed limitation.

1 Scissor slitting module complete with lift out knife shafts & 5 sets of knives.

1 Razor blade slitting with 5 holders.

1 Back scorer with 2 knives (manual setting).

1 Lower position rewind with 76mm air shaft; suitable for 800mm dia. rolls; capable of winding labels in and out; including taper tension control as standard.

1 Upper web advance complete with 5 separators, multiple stop positions and pneumatic web clamp to aid accurate lane placement on roll changes.

Included :
Cylinder: 204T
- Plate: 1,14 mm
- Tape: 0,508 mm
Anilox: 200LPI