Used WINDMÖLLER & HÖLSCHER Novoflex of 1999 for sale

Production speed: max.150m/min Winding mode: Surface / gap winding Film thickness: LDPE, LLDPE: 0.010 — 0.250mm HDPE: 0.008 — 0.100mm Roll diameter: max. 800mm Winding shafts: 6", pneumatic tensioning Core inner diameter: 76 / 152mm Core outer diameter: min. 85 / max. 195mm Web tension — draw feed: 30 — 500N Web tension — slitter: 30 — 350N Web tension prior to the winder position: 30 — 350N Contact pressure of lay—on roller at film roll: 40 — 650N Operating modes: fully automatic splicing on reaching set meter-age or on reaching set minimum roll diameter Expander roller: adjustable banana spreader roller Longitudinal slitting: between 2 rollers using blades Cross cutting during splicing: draw blade, pneumatically operated

Single-layer woven fabric valve sacks Production speed: 40 sacks/min Mechanical speed:50 sacks/min waste: 3-5% Material Main web: Circular woven fabric, coated 60/20 g/m2 Tolerances +5/-5 mm Unwinds: Roll diameter Max. 1500mm, Core inner diameter 200mm Valve material: Woven fabric, wated 60/20 g/m2 Cover patch material: woven fabric, wated: 60/20 g/m2 Unwinds: Roll diameter max. 1000mm, Core inner diameter: 200mm Size range Sakcs: Sacks width 40-50 cm sacks length 50/75 cm Bottom width 9-14 cm open bottom width 19-29 cm min, measure between triangular packets 18cm limiting sack width/bottom width (e.g.min. sack width and max.bottom width not feasible) Main core 41.5-66cm Cut-off length 40-90cm Valve: Cut-off length 11-20cm Web width 19-29cm Bottom patch: Cut-off lengths 26-45cm Web width 8-13.5cm Energy requirements Connected load 55kVA, 110A Average energy consumption 35kVA, 60A Cooling water (20ºC, 4 bar) approx. 1m3/h Compressed air (6-7 bar) 5-10 Nm3/h

Material type: LDPE; LLDPE ; HDPE Foil type: sleeve, half sleeve, foil, bottom-top gusset Bag type: punch, sealing loop handle; longitudinally sealing – hot air (top folded – upper swich) Unwinder: width max.1.400 mm Sealing type: shoper – teflon sealing Width of the sealing bar: 800 mm Speed of Machine: min. 60 pcs/min – max. 150 pcs/min Thickness:- min. -25 my-max. -100 my Bag height:- min. – 250 mm-max. - 750 mm Bottom gusset: - min. 27 mm – max. 100 mm Keeping the foil trough the machine: double-sided FIFE (on the machine) Core diameter: Ø 76 mm Roll diameter: max. 1.300 mm Printed foil: photocell Sealing bar for bottom gusset bag: YES

Film structure: A/B/C/D/E E/D/C/B/A C/A/A/A/E Materials: Cast PP thickness min/max 20- 250 µm Barrier film Mechanical speed max. 200 m/min Extruders: Filmex 120.30 A/ PT/PP Gravimetric dosing unit 3 comp Filmex 50.25 B/ HDPE Gravimetric dosing unit 1 comp Filmex 90.30 C/ PE/PP/PA Gravimetric dosing unit 3 comp Filmex 50.25 D/ HDPE Gravimetric dosing unit 1 comp Filmex 70.30 E/ PE/PP/PA Gravimetric dosing unit 3 comp Pro Control System Coextrusion Feedblock 5 - layer with 4 Selector-Plugs for producing: Flat die head 2000 mm 2 Chill Rolls D= 500mm Corona treatment Rewind Filmex automatic roll changes Max. rewind reel diameter 2100 mm

Coextrusion line for stretch hood Extruders Varex 60-105-60 mm Dosing units 6 components for extruder Automatic calibration basket Thickness control unit Kundig Gusseting devices Fixed haul off 1600 mm Corona treatment Cason Single rewinder Filmatic S 1600 mm Tower not included