Used Haul off for profiles: TECHNOPLAST TRZ-240/SA300 of 2003

Set of 20 head and calibrators for PVC window profiles 3 system with accessories. (PA 2000, PA 2000 slim, PA 4000) PA2000: 12 Tools PA 2000 slim : 4 tools PA 400: 4 tools Produced by Technoplast in 2003.

1.Twin-screw extruder TDE Konos - 72P (Equipped with an additional dosing units) --- 2 pcs 2. Calibration table Profi-Tec-KT 8000-1 (table length 8.8m) ---- 2pcs 3. Puller/ Saw Profi-TecRZ 15 / SA-1 ---- 2 pcs 4. Reception table K1300-1 ----- 2 pieces 5.Co-extruder TCE30-18--1 pcs 6. Chiller (Turkey) SS 350 Year 2013

This set of 2 lines allows to produce window profile KBE analogue The line consists of: 1. Twin-screw extruder TDE Konos 72P (equipped with an additional dosing) 2 pcs 2. Calibration table Profi-Tec-KT 8000-1 (table length 8,8m) 2pcs 3. Haul-off / Saw combination Profi-TecRZ 15 / SA-February 2 pc 4. Reception table K1300-1 2 pcs 5. Co-extruder TCE30-18 1 piece 6. Chiller(Turkey) 350 SS year 2013 7. Tool kit (frame, sash, impost, door sash, glazing bead (dual pane windows 24 mm) bead (dual pane windows 32 mm), 8. Laboratory equipment (Corner press, scales, freezer, straight edge, punch.)

Calibration table PROFITEC KT 115-DUAL-1 Number of vacuum pumps 8 Sterling SIHI Leme 155 OZ (capacity 141 cubic meters / hour) Total length of 11830 mm Overall width 1510 mm Overall height 1065 mm * Haul off and saw combination PROFITEC-RZ30 / SA-DUAL-1 Pulling and cutting PVC profiles after calibration. Management of each stream independently. Extrusion speed, variable m / min 0-10 Max. traction at 5 m / min 30 kN Motor output kW 4 tracks x 2,2 Contact length 2220 mm Max. profile height with standard height pads (pulling unit) 150 mm Max. section width (pulling device) 300 mm Engine power saws 2 x 3.0 kW Power suction device 2 x 1,1 kW Diameter of the blade 2 x 450 mm Max. profile height (saw) 120 mm Max. section width (saw) 350 mm Total power consumption of 14.3 kW * Device for applying the protective film F0200-1 DUAL For double-stream extrusion. Designed for applying self-adhesive protective film on the upper and lower side of the profile. Device is mounted between the suction device and a saw in the designated place. Max. film width: 100 mm Max. the diameter of the film ø: 270 mm The diameter of the nozzle film roll ø: 76 mm * Reception table PROFI-TEC-KI300-1 DUAL Length 5830 mm Width 1430 mm Height 1330 mm Max. section width 2 x 300 mm Height adjustment range of 100 mm

* Calibration table PROFITEC KT8000 Number of vacuum pumps 7 pieces Total length of 8880 mm Overall width 1010 mm Overall height 1065 mm Weight 1990 kg * Haul off and saw combination PROFITEC-RZ30 / SA-1 Pulling and cutting PVC profiles after calibration. Extrusion speed, variable m / min 0-10 Max. traction at 5 m / min 30 kN Motor output kW 2 tracks x 2,2 Contact length 2300 mm Max. profile height with standard height pads (pulling unit) 150 mm Max. section width (pulling device) 300 mm Engine power saws 3.0 kW Power suction device 1,1 kW Diameter of the blade 450 mm Max. profile height (saw) 120 mm Max. section width (saw) 350 mm Total power consumption of 9.5 kW Total length of 6630 mm Overall width 1000 mm Overall height 1650 mm Weight 2080 kg