XINDA SJW 45 of 2015

2015 | Ref.: 300049758

Co-kneader extruder XINDA, The team at MachinePoint will accompany you through the whole process of buying the machine.

Data Sheet of Used XINDA SJW 45

Ref.: 300049758

Year: 2015

Brand: XINDA

Status:
For sale

Delivery time: Immediate

Ask for machine price Want to sell your machine?
XINDA - SJW 45 - Used machine
XINDA - SJW 45 - Used machine
XINDA - SJW 45 - Used machine
XINDA - SJW 45 - Used machine
XINDA - SJW 45 - Used machine
XINDA - SJW 45 - Used machine
XINDA - SJW 45 - Used machine
XINDA - SJW 45 - Used machine

Technical Specifications:

  • Number Of Screws: 1
  • Screw Diameters: 45
  • Throughput: 60 kg/h
  • Screw L/D Ratio: 20
  • Segmented Screw: Yes
  • Screw Speed: 400 rpm
  • Venting: Yes
  • Side Feeder: Yes

Other Specifications:

SJW-45 20L/D Kneading and Extruding System (type BUSS Co-Kneader)
Output: 20-60 kg/h (may be various due to different formulations)
The barrel is divided into 4 segments; heated and cooled separately; with circular water-cooling system inside barrels
Main motor: 22KW AC with SIEMENS inverter
Vertical forcing feeder: 1 set, on 1st barrel section; 0.75 KW. Volume: 15 lt
Equipped with the material level –sensing alarm system and inverter control;the feeder is equipped with feeding hole and vent hole
Side feeder: 1 set, located on 2nd or 3rd barrel section; each side feeder is with twin screw feeder & with cooling system of the barrels
Barrel: 4 segments, with circular cooling system inside; the first segment has a feeding port, the third has a vent (it can be plugged), the fourth has a degassing port
Water recycling and cooling system: including a water tank
Vacuum system: water recycling type, -0.1Mpa, 0.55 KW
Melt pump: 1 set
Air cooling die face cutting system – 1 set: including round die, cutting chamber, one stage blower + pipe + silo; vibrator

Less than 500 working hours

Other Details:

Guarantee: Without guarantee

Current condition: Not running. Can be shown with material

Availability: Immediate

MachinePoint's services:

Loading and lashing

Packaging

Dismantling

Refurbishing & Overhauling services

Used Machinery Appraisals

Transport of industrial machinery

Similar Products:

Co-kneader extruder BUSS COMPEO BCC 88-25 MT-0

BUSS COMPEO BCC 88-25 MT-0

Co-kneader extruder

2022
Ref: 300048847
BUSS
More information
Compounding extrusion lines XINDA SHJ-65

XINDA SHJ-65

Compounding extrusion lines

2023
Ref: 300049898
XINDA
More information
High speed mixers MOLTENI TM600

MOLTENI TM600

High speed mixers

2000
Ref: 300045714
MOLTENI
More information
High speed mixers PLASMEC TRA 700/1V/NJ

PLASMEC TRA 700/1V/NJ

High speed mixers

2011
Ref: 300048671
PLASMEC
More information
Silos FÖRDERANLAGEN-MASCHINENBAU KANERT GMBH Silo

FÖRDERANLAGEN-MASCHINENBAU KANERT GMBH Silo

Silos

2019
Ref: 300048617
FÖRDERANLAGEN-MASCHINENBAU KANERT GMBH
More information
Silo discharge devices MAIN TECH Lince Serie SSAC

MAIN TECH Lince Serie SSAC

Silo discharge devices

2021
Ref: 300049282
MAIN TECH
More information
Automatic bagging machine CONCETTI IGF

CONCETTI IGF

Automatic bagging machine

2012
Ref: 300049862
CONCETTI
More information
Twin-screw extruder for PE/PP compounds MARIS TM 58 MW LD 48

MARIS TM 58 MW LD 48

Twin-screw extruder for PE/PP compounds

2017
Ref: 300048454
MARIS
More information

Machines sold in the past:

XINDA PSHJ 35 High Speed High Torque CO rotate Twin screw extruder line Capacity 30 -100 kg/h: capacity may be different according to different formulations Consist of: 1) Volumetric main feeder T-28 Invertor: Emerson (USA) Capacity: 30-150 kg/h 2) Shaft Material 40CrNiMo HRC 30 32 Max.speed: 600 rpm 3) Screw and liner Material: 12CrMoV 4) Barrel Clamshell ; 6 sections The temperature and cooling of each section can be individually controlled 5) Heating system Heating Power: 14,6 kW Temperature control: Omron (Japon) 6) Thermocouples There are 7 sets K-type thermocouples on all barrel sections and the die 7) Cooling system Close circuit liquid (pure water or oil) circulation system Water pump: 0,55 kW 8) Vacuum degassing 9) Water bath for Strand cooling Die Holes: 3 pcs, 3mm holes on the die, Die Material: 40Cr Die heater: ~0.4KW 10) Screen It can be clean or replace by unscrewing 4 bolts, no need to open the die 11) Water through Length: 2000 mm Width: 400 mm Height: 300 mm 12) Air knife cools the strands 13) Palletizer Pallet size: 3x3 mm Power: 2,2 kW Invertor: NIDEC 14) Vibration Dimensions: 1340x540 mm Screen Quantity: doble layer screen PLC Simenes S7 1200 Warranty period: 12 months Available December 2023
Co-rotating twin screw extrusion line Working capacity: up to 500 kg/h (depending on material and working condition) Extruder Xinda SHJ- 75; co-rotating; year 2019 Screw: 75 mm; L/D 44 PLC Siemens Simatic S7 1200 Simenes touch screen UW-95 underwater pelletezing system Flange/adapter Divert valve DV40 Underwater pelletizer PA 95 Water cycling system WS 120 Spin dryer PD 10 PLC Siemens Simatic S7 200 Turbo mixer BST; model SRL Z-300/600 Max capacity: 300L; net capacity 225 L Mill Karadag plasmak; model KRD 40; year 2021 Cooling unit
Processed materials: PE, PP, PA, ABS 1x Hopper 2 x Gravimetric Dosing (Side dosing and gravimetric dosing units with control system included) output capacity: 40-100 kg/h screen changer: NO die head cutting system: NO Granulator: NO Conveying System: NO CE certified und machine manuals included 2 pairs of screws, one mounted. Can be tested without gravimetric dosing as this is still in use. Gravimetric dosing can be tested separately as it is not mounted on the machine.
Twin Screw Extruder Diameter 45 L/D 31 Modular Screws Spaghetti die head Cooling Tank Pelletizer Sieve
co-kneader 45 mm with spaghetti die head, melt pump and screen changer, and brabender gravimetric system. MISSING; degassing pump and screw oil pump

Meet US At

Djazagro26
Chinaplas26
Interpack26
Plastpol26
Contact Us

Ask for machine price

Co-kneader extruder - XINDA - SJW 45 - Ref.300049758

First and Last Name *
Please input your name
Contact Phone *
Please input your contact number
Company *
Please input your company name
Email address *
Please input a correct email address
City *
Please input your city
Country *
Please input your Country
Comments *
Please input your comments
To continue you must accept Personal Data Processing Policy.