Used Extrusion lines for strapping tapes

Technostrap Extruder Line - PET strap COMPLETE EXTRUDER GROUP Diameter 130 mm, for PET; L/D report= 32; 7 thermoregulation area 520 kg/h CONTROL UNIT Control and synchronisation pulpit for the extrusion line SCREEN CHANGER Continuous-flow hydraulic filter unit KREYENBORG with self-cleaning system for 200 kg/h of HDPE, 350 kg/h of PP, 550 kg/h of PET for three control zones. DIE HEAD For 4-8 exits; for PP and PET; for 4 individual dosing pumps; 5 thermoregulation zones; for useful cylinder width: 450 mm including 1 die for 2 straps WATER COOLING TANK UNIT Width: 400 mm; lenght: 2000 mm; depth: 1200 mm; a PET thermoregulation zone; water-cooled roller in the upper drive 1st GODET Slow ironing godet. Heated ceramic cylinders. Diameter 318 mm, witdh: 400 mm; 2 pressure rollers; for PET. AIR IRONING OVEN Air ironing oven with 3 passages of material; width: 400 mm, lenght: 4000 mm; 2 pressure rollers; for PET. 2nd & 3rd GODET Fast ironing godet. Heated ceramic cylinders. Diameter 318 mm, witdh: 400 mm; 2 pressure rollers; for PET. HEATING CONTROL UNIT Diathermic oil type 2050 for cylinders GOFFLER Lenght:400 mm; ø 275 STABILISTION OVEN Air stabilisation oven. Lenght: 400 mm; 5 strap passages 2nd COOLING UNIT Complete cooling system with modular water chiller; cooling capacity: 150,000 frig/h (nominal) 1st TOWING GODET 3 ceramic rollers, diameter: 318 mm, width: 400 mm; 1 pressure roller; for PP and PET 2nd TOWING GODET 3 ceramic rollers, diameter: 318 mm, width: 400 mm; 1 pressure roller; for PP and PET WINDERS

The tape stretching line serves for the production of stretched film tapes of PP, HDPE or mixtures of these materials. working width 2000mm Stretching ratio: approx. 1:6 - 1:7 Final stretching 1:5 - 1:6 Slow recooling: greater distance to the water results in less and bigger crystals and therefore less power for stretching Minimum distance: 10 mm (for container tapes) Max. distance: 50 mm (for thin tapes) Extruder: 150/30 Drive power : 252 kW Number of heating zones: 8 Heating capacity approx.: 106 kW Melting capacity max.: 820 kg/h Melt Pump: 371 cm3/U 328 winders included

Complete PP strap extrusion line with double outlet for 12-16 mm Union 60-30 D extruder with overhauled head and new resistances new thermocouple motor dosing unit and feeder included. New CE certificated electrical panel and complete with wiring diagram New galvanized cold water tank and stainless steel rollers with immersion system with PIV mechanical adjustment and new heating elements embossing machine with new embossing rollers SIMEC GROUP new, l hardening tank complete with resistances and safety devices on each heating element with thermal intervention (without separately wired line resistance) cold water tank with anti-water roller outlet roller mechanical winder for 400 mm electric winder towing 200 mm The line produces at least 2 rolls of 2000 metres of manual belt 12x0.7 mm every 45-50 minutes, productivity in 24 hours on a 48-roller pallet. The strap produced 12x0.75 manual black and automatic white 12x0.65 mm with 100% recycled virgin material Working hours after overhauling no. 600 Average Consumption 50 w

Complete line for the production of PE, PVC, PP grid Model JG-FW45 - A grid with a square cell with a size of 2x2 mm, 6x6 mm, 10x10, 15x15, 20x20mm - Calibrator: 1.0 m - Productivity is 25-30 rolls/12 hours in the roll of 25 m. Composition: - vacuum loader - 2 pcs - Extruders - 2 pcs. diam. 45mm, powerful drive 7.5 kW, heater power about 20 kW - Rotating heads and nozzles - 1 set - Cooling and calibration system - 1 set - Cutting and mandrel system - 1 set - Pulling system - 1 set - Winding system - 1 set. - Control system

Complete line for the production of plastic grid Model JG-YZW90 - gird with square mesh size 6x6 mm, 15x15 mm, 35x35mm, 50x50mm (calibrator 1m) - grid with rhombic cell 20x20 mm, 40x40 mm, 60 x 60 mm (calibrator 2,5 m) Available one calibrator of 1,6 m home made - performance 30 rolls/12 h with calibrator 2,5 m Twin screw extruder: 90 mm, L/D: 25 D Screw speed - from 5 to 30 rpm Dimensions - 12000 * 3100 * 3500 mm Weight - 6000 kg Composition: - vacuum loader - 1 kt - extruder - 1 Kt drive power 37 kW, heating power about 30 kW - rotating head and nozzle - 1k-t heating power about 10 kW - cooling and calibration system - 1 kt (three calibrators (1m, 1.6m, 2.5m) - winding system - control system.